I would like to add controls like textBox in GridView from code on the fly.
In my project i have one Grid in that i can't decide how many rows and columns are there. so that i just give it DataSource. This working fine. [code]...
In my application,i have a gridview in which columns are created at runtime.Actually these columns are created when i am entering data in a database table.[code]where Column1,Column2,column3 may vary during runtime.i need to enter values to these columns during runtime.But i cant bind these columns because these are created during runtime.The first column "Description" will not change.It will remain constant.For each description, there will be values for each column.At last these data will be saved to the database.How to add columns in the gridview during runtime?
View 2 RepliesI have a dynamically-created GridView which to which I'm attaching a handler using the AddHandler command. The problem is that when I try to refer to sender.rows within that function, it won't do anything because it says that sender.rows.count = 0. I've done enough dynamic form creation that I'm pretty sure that I'm creating the controls, binding them, and adding the handler at the proper points during the page init/load load_complete. Also, I have nearly the exact same code-behind on another form that is not dynamic, and it is able to access the values in the rows.
Considering that the RowCommand event is firing, it's clear that I'm clicking on a row. For some reason it's just not in scope for the handler event. Background: What I really want to do is access the values that are databound to the row. I'm creating a SQLCommand and binding that to the dynamic grid, and I would prefer to talk to the grid's datasource, but that doesn't seem to be possible. Perhaps I'm missing something, but for now it seems that reading the values from the GridView (which I hate doing) is the only thing that works.
[Code]...
I have a variable defined as follows:Dim iRows As List(Of String())I've also been converting that to a list of lists just to make it easier to work with.Dim iRows As List(Of IList(Of String))I would like to bind that list to a GridView using the contents of the nested array/list to dynamically define the columns. I don't know ahead of time how many columns there will be, but I do know that they are all the same throughout the list.
View 2 RepliesI have been trying to modify the data going into a column by adding spacing to the start of the column before the Row ID, using the level to multiply the amount of spaces.Ie. ID is SVG00098 and is a Level 3 Asset, so it requires 6 spaces before the ID.
View 8 RepliesI'm creating a dynamic gridview in vb.net using a connected sql database. Everything works fine except 1 thing: when i click the update command, the event just won't fire no matter what I do. the gridview goes into edit mode and the cancel button works fine. This has cost me over 2 days of googling but none of the solutions work. I used breakpoints to check if the code was executed, but it wasn't. If anybody has any experience in this:I believe the problem lies in the addhandler but it doesn't give any errors.I forgot to mention that the sql command was a test and sets the data in that field to 15, now it's 10, it works when i use a normal button or a static gridview.
Public Class WebForm1
Inherits System.Web.UI.Page
Dim rowscount As Integer = 2
[code]....
Is there a way to dynamically create properties at runtime in VB .NET using introspection?
e.g. Suppose I had a class
Public Class Foo
Public Property Bar() As String
get
...
end get
[code]....
Is there a way to create property Bar at runtime?
I have a .NET library which I know can be fairly easily linked from VS project to reference it from code. However for security reasons I want to place the DLL file in another location on the disk and reference it from code including executing methods and passing method parameters. What is the proper technique to accomplish this?
View 4 RepliesI am trying to create a number of objects depending on the width of a row of an array, is there a way I can change the name of the variable being Dim 'd as I don't know how wide the array will be.
I have been trying something along the lines of:
pseudocode
For x as integer = 0 to UBound(MyArray,2)
Dim Object & CStr(x) As Object Type
Next
I have a DevExpress GridView whose cells are painted with a random color based on some condition. Now each color has a meaning and I want to show it as a legend. Number of colors used for each condition may vary.How can I do this. I'm using DevExpress 2009 Vol2, and .Net framework - 2.0 and WinForms?
View 1 RepliesI have a web page with 5 checkboxes and 2 textboxes per checkbox. When the user checks one or more checkboxes the corresponding textboxes become enalbed for UI. I need to insure that the input for the textboxes is an integer-that I will do with a validators. There is a gridView on the same page. When the user checks one or more checkboxes the 2 columns of the gridView rows become active for input through enabled textboxes.
There are 4 columns in the grid. The minimum number of rows enabled are 2 and the maximum are 26. The UI for the grid's textbox input is numbers. Those numbers have to be equal to or less than the total. How do I validate UI of numbers(integers) into the grid's dynamically generated textboxes and then add the total and compare it to the alloted total? I prefer to do this with the code behind - using VB.NET - rather than with ASP.NET or absolutely not javascript.
I have a page which has a GridView on it, which is populated from a database. Some of the columns in the GridView have text boxes, as well as Checkboxes.When the user saves the page, the page may error if they have not entered their data correctly. At this point, I need to re-display what they have entered already so they can simply make the correction instead of having to change everything from scratch again.
View 1 RepliesI know hoe to add a control at runtime to a form, what I would like to know is if there is a way to add code programmatically at runtime as well?
[Code]...
I have a .NET library which I know can be fairly easily linked from VS project to reference it from code. However for security reasons I want to place the DLL file in another location on the disk and reference it from code including executing methods and passing method parameters.
View 1 RepliesI use VB. NET 2008. I'm starting to work with the Tab Control and command will want to know about techniques such as adding tabs at runtime using this control.
To illustrate what I'm saying, just take one checked on your browser or in the VB (Start Page, when we add other forms to our project).
i have to convert html page(report which is dynamic in nature i.e. different for different user to pdf at runtime how can i do that.
View 6 RepliesI need to make a report but my columns will be chosen in run-time. I used to make report with crystal report by filling my data to query table and connect this query table with designed report by crystal report. but this time the user will choose the fields in run-time.
View 3 RepliesI am working with a simple game idea. I wanted to have two players running around shooting each other (very low graphics, like circles and squares). I've got this far; I have the ability to move around both characters, and change directions etc. ive also been able to set up my shooting. Only problem I run into is getting the bullet to move! I cant use a preset timer, because if I used that, I could only shoot one bullet at a time, so I would need to create new ones dynamically.
So my question is; how does one add dynamic timers to a form on runtime, and alter the tick sub so that it moves the picturebox (bullet) and once it can be moved, (I was thinking about using player locations in relation to the bullet, and if they were equal than the health would go down or whatever, but unfortunately, this means it would have to be directly in the middle of the player, which would be odd..
I have a Grid With Text Item Templates to insert data from Grid to Database.I have to make some formula on runtime with out postback the page Can i do this My code is bellow.
For Each gvRow2 As GridViewRow In GridView1.Rows
Dim txtNetWt As TextBox = CType(gvRow2.FindControl("txtNetWt"), TextBox)
Dim txtGrossWt As TextBox = CType(gvRow2.FindControl("txtGrossWt"), TextBox)
[Code]....
I re-wrote this to make it more readable. If you want to skip right to the chase, look at the ALL CAPS comments in the code blocks. All necessary code has been included for debugging. I've searched multiple forums (including ASP.NET), and the MSDN library and cannot fix this >.<
[Code]....
GridView SORTING of DYNAMIC Columns and Data Source Scope
View 2 RepliesI have a nested content page within a master page, upon load the the page retrieves from a SQL a list of controls to create (Field Type, FieldName) i.e. String, Username.The function loops around the list creating the controls on the webform in a Placeholder, this part works perfectly. The problem that I am experiencing is the request to obtain the value entered by the user in the dynamically created control, I need to perform this call following postback/callback.
If I take the Content page and make it a standard aspx page with no master page the application works fine. Unfortunatley taking the page out of the master page is not an option (unfortunatley a restriction by my client)
I'm developing an application to allow engineers to conduct simple single table/view queries against our databases by selecting Database, Table, Fields.
I get how to use the Dynamic LINQ Library Sample to provide for dynamically selecting the Select, Where and Order by Clauses at runtime but I'm at an impass on how to allot for table choice.
Is there a way to provide for dynamically selecting the "from" table at run time
EDIT
So Both of the answers seem to be saying the same general Idea. I'm going to try to convert the C# into VB and get it to work.
The first answer converts to
NotInheritable Class DataContextExtensions
Private Sub New()
End Sub
[Code].....
I am new in programming. And I am coding with VB.Net (VB2008). On my form I have 9 checkboxes. And each of this checkbox when checked is meant to submit a value to a dynamic array. Initially the array was a constant that was declared like these:
Dim Notes() AS integer = {1, 2, 5, 10, 20, 50, 100, 200, 500, 1000}
But I want the array to be dynamic. That is the user of the program is to enter the element of the array. So I decided to use checkboxes. So that if the user of the program checks any of the checkboxes, a particular value or element should be submitted into the array. And the user should be able to check as many checkboxes and have values representing those checkboxes submitted in to the array.
For example: if the user check checkbox1, checkbox2 and checkbox50.
The array should look like these. { 1, 2, 50 }
or if the user check checkbox1000, checkbox200, checkbox10 and checkbox500
Then the array should hold or contain the following integers in this order; {20, 200, 500, 1000}.
That is the array is dynamic and the content/elements of the array and the bound of the array should depend on the checkboxes that is checked. What other means can I used to enter values/elements into a dynamic array during run time.
I am looking to be able to add items to a combox in a gridview at runtime. The only code that I have found is for an editable datagrid combobox not one that items can be added on runtime. Is anyone now of a free datagridview control that does this?
View 3 RepliesI am binding a DataSet objetc as a datasource to my GridView. However i want to omit first column from being displayed. If i write GridView1.Columns(0).Visible = False
then i get error saying there was some indexing error. How can this be acheived ??? Also a weird thing is that when I try to count columns it displays me count as 0
I am putting together a kind of "build your own report" page that will have up to 20 options for people to select.Each option, selected by checkbox or dropdown (probably) will add on to the SQL data source to pull only the information needed and display it in a gridview.For instance, the initial query is:
Select
C.Name,
From Clients as C
[code].....
How can I do this, preferably referring to the column using the column name of "My Position" and not a numeric...If this can NOT be done....The other option is to query everything and format it - and then hide columns in the gridview based on items that are not checked. Would this be easier? (Doesn't sound as efficient to me).
I have an unbound Gridview that is populated by a Linq to Entities query and would like to convert string values in a particular column to lowercase. In the Gridview's RowDataBound event, I have tried StrConv(e.Row.Cells(3).Text, VbStrConv.ProperCase) but this doesn't work. I have also tried StrConv(emp.Name, VbStrConv.ProperCase) in the LiNQ to Entities query but still the Name values returned are to converted to Lower-case.
Protected Sub GridView3_RowDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewRowEventArgs) Handles GridView3.RowDataBound
If e.Row.RowType = DataControlRowType.DataRow Then
For i As Integer = 0 To e.Row.Cells.Count - 1
Dim cellDate As Date
[Code] .....
I was trying to move some dynamic control within the parent container like panel or a group box how do i do that?
View 12 RepliesI got problem regarding declaration of dynamic runtime array declaration Here is my code
[Code]...