Add Folder To Current Users Mymusic Folder During Setup Deployment
May 14, 2010How to add folder to the current users mymusic folder during setup deployment?
View 2 RepliesHow to add folder to the current users mymusic folder during setup deployment?
View 2 RepliesThe 'DefaultLocation' for my application is set to '[ProgramFilesFolder]MyApp'. Now I would like the user to select what drive to install this application to. I know this is accomplished through the 'Installation Folder Selection' dialog, but I want the user to be able to select a drive only, not the entire path.
My question is how do I capture what drive the user selected from the 'Installation Folder Selection' dialog and use that drive letter to tack on to my 'DefaultLocation' variable?
[Code]...
I would like to know how to create/add a folder when installing the application using the Setup and Deployment in VB.net.
I have tried [TARGETDIR][USERNAME], but the target folder name that gets created seems its adding the Domain nameUsername, and this is where it stops where it only created the folder with the Domain Name.
I have created deployment package for VB.Net appolication and it runs fine. When setup is rnning, I want deployment package to move a file from bin folder to other specific folder. how can I move this file to specific folder.
View 1 RepliesIm using Visual Studio 2008 This is my first program I renamed the program for the forum. If I remove the paths and execute my .exe from the AppDatalocal folder where the settings.ini file is it works fine, but I don't want have to run the program from there. I tried using %Username% for relative paths, but the computer can't follow the path. Do i have to write code to get the current username or how do programmers do this? Here's part of the program
[Code]...
I have a question regarding publishing vis ClickOnce. For the publish options, there is a Publishing Folder Location and there is a Installation Folder URL. clarify the difference between Publish and Install, and when it would be apropriate for the two to be different?
View 3 RepliesI am using Visual Studio 2008 Setup project. I need to copy one folder and the sub folders into the program files but when I tried to copy or add the folder to "Application Folder" in File System editor, I am able to add only files and not folders.
View 1 RepliesI have a program that creates a root folder and sub-folder in the users C-drive.I unfortunatley did not think this through propaly. Senario = if a user does not have access to the C-drive and just has an account to thier 'My Documents' then they cannot use this program.How i achieve the C-drive root-folder, sub-folder, and eventually text file creation is as follows;
If
My.Computer.FileSystem.DirectoryExists("C:AMSFTAMSFT_RunnersDetails"
+ Label81.Text) Then[code]...
I do not what to change the format of this code too much as it is embedded heavily in my code, what i want to do is instead of checking and creating these folders and text files in the C-drive, i would like to change the location to a potentially unrestricted area, eg; 'my Documents'. how to alter this code to achieve this?
I have a program load the saved folder (from last use) into a textbox, now, user click browse button, it launch the folder browse dialog, I can use selectedpath to set selected folder, but most of time, the folder is deep in the c:, so, the folder browser dialog window does not show it, user has to scroll down to find it.is there a way to automatically show the selected folder in the view?
View 2 RepliesDuring the installation stage of VS programs, via setup and deployement, the end user is given an option to install to local settings or for all users. Where is this information saved?
View 8 Replieshow to copy, delete, show files, show current directory, change directory, make folder, rename folder. My problem is i have a method on deleting a file and copying a file, but i don't know how to pass the method so that when i click the delete button it would let me choose what file to delete. By the way im using buttons on each function.[code...]
View 2 RepliesI (through a ton of help from everyone here at stack-o) have created a small WCF which is hosted as a Windows service using TCP..Last question for this little bugger; it's time for deployment. In my solution, there are 3 projects. One is the Windows service, another is the imported WCF, and finally a setup project I added for install.I can install/uninstall the service on my machine by going in the solution directory and finding "Setup.exe" or "Setup.msi". Executing either from explorer will install the service on my development box.Now there are a few directories associated with this solution. I'm betting that simply copying setup.exe or setup.msi to my target server and trying to run it will bomb out. How can I find out exactly which files/folder I will need to copy over for deployment?Or should I just copy the entire solution directory? That will be a little difficult for my coworkers as the setup routines are nested in directories 5 deep.
View 3 RepliesI have nerver used my application in windows vista or windows 7.It turns that WinXp SP 2 supports great but when i run it in windows 7 , it shows error like this but I can't install MDAC28 in windows 7 Because it is for windows 9x.Isn't vista/7 contain JetOledb components?.I have some other questions too in windows vista/7 there are some restriction on folder viewing .. In few of application , I used to save some info in system32 folder now those applications are also working.How we can save infos in windows 7 at system directory?
View 19 RepliesI am just trying to get to grips with the setup tool in visual studio and seem to be making progress but im falling over with access permissions.My projects includes an mdf table and when i install my project the folder and db file is always set to read only and the application cannot write to it.How can i change or set the permission when the application is installed?
View 7 RepliesI need to know how to get the current exe folder, but how to do this? (So the folder where the exe is in).
View 2 RepliesIn my application, I create data and log folders that must be shared by all users using this computer. I did a lot of research, and I found a function that is supposed to grant full access to every users of a folder and its children. However if right-click properties on my folder, the access is unchanged. ow should I grant full access to all users of a folder and its children (I don't care who created it, all users should be able to read and write to that folder)?
Public Sub GrantAllAccess(ByVal Folder As String)
Try
Dim DomainUser As String = Environment.UserDomainName & "" & Environment.UserName
[code].....
I need to find a folder that is shared between all users of a PC, every body being able to read/write to that folder and below, without any errors. I think that the folder "C:Documents and SettingsAll UsersShared Folder" would do the trick. How do I find the path to that folder, regardless of the OS used (Xp / Vista / 7) and regardless of the Windows language (With a french Windows, this folder is called "C:Documents and SettingsAll UsersDocuments partag").
View 5 RepliesI want to create a folder " c:imagebox " when the user runs my setup. I tried this in " Add special folder --> Custom folder " then a folder appears i renamed it to ImageBox and in default location i typed " C: " and set its property to always create but when i tested the setup on xp an vista i did not created any folder.
View 1 RepliesI include a javascript include folder in the root directory of my setup project in the Application Folder. I tried to move the javascript include file under the Javascript folder and I now get:
[Code]...
I can delete the the directory and then add the files one by one but their are over 200 files in that include directory. Is their an easy way to move a folder in the application folder of the file system view of a setup program?
I have set paths in my program to look for files in the "c:/Documents and Settings/User/ Local Settings/Application Data/".How do I add the "Documents and Settings/User/Local Settings/Application Data/" folder in the setup program? Everyone tells me to use the Local Settings path for my application data but I can't add this folder in the File System Editor. I have read many different help files concerning special folders but none of them explain how to add the local application data folder.
View 1 RepliesI would like to know how to create/add a folder when installing the application using the Setup and Deployment in VB.net.I have tried [TARGETDIR]\[USERNAME], but the target folder name that gets created seems its adding the Domain name\Username, and this is where it stops where it only created the folder with the Domain Name.
View 1 RepliesI am trying to create a folder with current date but getting error. Here is my code.
[Code]...
I've been searching for a while, but it seems that I can't find an easy way to get the current user profile folder. I've tried "%userprofile%" environment variable, but it didn't worked (or I'm doing something wrong).How can I do it? I want to add the value to an string variable.
I actually tried something like: Dim Userfolder As String = %UserProfile%
I tried with quote marks too, but none seems to do the trick.What I'm missing?
How can I have a Folder created with the Current Date and Time as iets Name and at the same time Save a Picture into that newly created Folder. Here is the code I am trying to get to work.
PictureBox1.Image = myCam.copyFrame _
(Me.PreViewPictureBox, New RectangleF(0, 0, Me.PreViewPictureBox.Width, Me.PreViewPictureBox.Height))
'<<< Creating New Folder and Saving Image to that Folder.>>>
If (PictureBox1.Image IsNot Nothing) Then
Dim NewFolder As DateTime = Now
[Code] .....
How would I get the current user's folder?Example:"C:Documents and SettingsOwner"
View 1 Replieshow to remove a Folder created in Users Program Menu under File System, when an application is uninstalled? During installation of the Application, a link is created at the users desktop and also in Users Program Menu. However during uninstallation the link for the Users Desktop and User Program Menu is removed, but the Folder created in the Users Program Menu remains.
View 4 RepliesHow do I know wich is the current folder of an App?? I mean... Is there a way to know where is the exe located from the running code?
View 5 RepliesI have been trying to create folders for database backup purposes. These folders were to be based on the current date and time as the name of the folder.[code]...
View 8 RepliesI have a program that creates folders with current date. I want to paste my files into folder that uses current date as name of the folder. My code below works great but i have to provide the folder name that the files will be paste into. How can i paste files into folder that uses current date as folder name?
Imports System.IO
Imports System.Xml.Linq
Module Module1
[Code].....
I want to ask, how to execute a file in current folder?I am Using Visual Basic Express Edition 2010
View 1 Replies