I have an application in which I have inserted a DataGridView. I am populateing this DGV with a dataset created on design time. In this moment I have a question. Is it posible to add a parameter to this dataset?When I have populated the dgv, automatically was created the line of code: [code]In report is very simple to add parameters but here I cannot figure how to add a parameter.
View 3 Replies
I'm having a hard time to find out how to pass at run time a parameter which I defined in an adapter in a dataset. When I preview the data I can insert the value manually, but I was not able to find any code around how to pass it in the visual basic code.
View 2 RepliesI created a dataset that is getting data from an access database. Now i would like to go further and make the dataset query accept a parameter from a form datepick value. the query in my table adapter I have changed it as follows to accept a parameter on date1.[code]The code I am using in my form is as below. I get a null reference exception on the second line(Object reference not set to an instance of an object). it seems as if my selectCommand is bringing nothing.[code]
View 4 RepliesI have a bound DataGridView (dgvBuild) that contains data based on a "ProductID" that is derived from selecting the value from a ComboBox. How do I pass the ComboBox Value to the DataAdapter to retrieve records to reload the dgvBuild? Below is the code for theDataAdapter.This is the line that was created when I bound the DataGridView to a DB Table.
View 8 RepliesI've try to assign the new parameter to dataset, while i using the following code, i got the error like "Varchar is not a member of Devart.Data.Oracle.OracleType"
View 1 Replieshow to pass a parameter to a predefined parameter in a dataset. I've found everywhere a solution if you build the sqldata adapter and the dataset in the code. Then you can pass the parameter like: da.SelectCommand.Parameters.Add("@param1", SqlDbType.Char).Value = param1_variable (as example)
But if you have builded a dataset (with table adapters), and then in the form app you want just to pass the param1 to a DataGridView1 (as example) which is using the table adapter, I did not find how to do this.
I have created an application in which I have to make a report with ReportViewver from Microsoft.Everything ok until now. I have created the report and for this report I have created a dataset. This dataset contains data for every month in every year from 2010 to 2015. With this dataset I am populating a graphic but my problem is that I want to select the year and create graphic for one year.I do not know how to insert a parameter in the dataset. In sql is very easy by in Access is different and if I try to put something like ...' where year_column=@year_parameter' I receive an error.
View 3 RepliesI am trying to utilize the access database, but I'm getting an error message: Value cannot be null. Parameter name: dataSet
[Code]...
That's the code I'm using, why I'm getting this error?
Following code doesnt work and raise error "A parameter is missing. [ Parameter ordinal = 1 ]".What s wrong with it?I am developing pocket pc application in vs 2008 and sqlce 3.5 sp1.
[code]....
I'm Trying to Call the Stored Procedure which has one input Parameter and one output parameter . VB.net code is below
[Code].....
I want to have a "template" function that can receive different parameter and a type parameter, like:[code]But Vb told me that tupeList is not defined... is there a way I can do that?
View 2 RepliesIs it possible to make a procedure have a single parameter but the values for that parameter are more than one? I have this procedure:
Public Sub autoComplete(ByVal cboCombo As ComboBox)
With cboCombo
.AutoCompleteMode = AutoCompleteMode.Append[code]....
Now I was wondering if there is a way to use it like this:
autoComplete(myCombobox1, myCombobox2, myCombobox3)
Or can I use a procedure like this with 'With...End With'?
I have a method which requires a parameter to be passed in. I would like to use the Addhandler to call the method through a dynamically created button control's click event.
When I include () in the AddressOf, VS complains: 'AddressOf' operand must be the name of a method (without parentheses).
When I exclude the brackets, VS complains: Method '...' does not have a signature compatible with delegate...
My code:
CODE:
One of the things that I think is really cool about VB.NET is how built-in functions and subs have extra help text in their ToolTips like "Expression: String expression to search for replace string." as well as the usual "Replace(...parameters...) as string" text. So are the pop up boxes with things like "CompareMethod.Binary" or "CompareMethod.Text." And finally I like how some functions and subs have different sets of parameters for the same routine. For example, New FileStream() starts with either a path (string) parameter or handle parameter, but none of the 15 sets of parameters contain both path and handle parameters. Is there a way that I can set up the classes and functions I write to use these things or do they only work with built in classes and functions? If there is a way, what are the proper names for them so I can look them up in the VS/VB documentation? I would be happy enough if someone would give me an example of them, but it would be nicer if I could go through the documentation and find out if there are other cool things that are related or near by.
View 3 Replieshave an idea on what i am doing wrong here:
Compiler Error Message: BC30455: Argument not specified for parameter 'dteRDate' of 'Public Sub New(strOName As String, strOAdd As String, intOPhone As Integer, strVer As String, dteRDate As Date, dteWDate As Date, strONote As String, strOrName As
[code].....
I have a vbscript that runs under asp page. I need convert the code to VB.NET
SET objCommand = Server.CreateObject("ADODB.Command")
objCommand.ActiveConnection = Application(DB)
With objCommand
[code]....
What is the VB.Net that will do exactly the vbscript does? I like paramer(0) and 1 and 2 etc since I don't need to define the parameter(0) as integer or varchar etc. I remembered I have discuss this before and it is possible to do in VB.NET?
When the user clicks an "Edit" button on my form, I want a box to come up which allows the user to edit a DataTable in a strongly-typed DataSet. What's the best way to do this?
View 2 RepliesI have code running in the Datatable.ColumnChanging event in my dataset. This dataset underlies a form and conventional drag/drop controls are in place for data entry.when the event triggers and runs, I am running code in the form that checks the dataset.HasChanges property. It is showing False. But this is immediately after the ColumnChanging event has been triggered.Okay, I see by others posts and MSDN that .HasChanges will only be true after moving off the row with the changed column. I have also noted lots of discussion about the advanced binding property of DataSourceUpdate Mode, but that does not address this issue.I guess I can do this by checking the state of the row for the binding source. Just seems odd that the event behind the dataset can be triggered and that does not change the dataset.HasChanges property.
View 3 RepliesI have tried everything I can to get beyond this error which shows below as <<<<< error here. It is trying to fill a dataset from a data adapter. If I change the SELECT statement to just SELECT * FROM xTable I get the correct number of records in each table. But anytime I try with a more complex statement I get the error message shown below which indicates System.Data.Common.DbDataAdapter.Fill(DataSet dataSet. I've completely erased all data and entered a new set of test data so I know there is no problem with relationships. Each table has primary key which is foreign key in other table. IS there something wrong with the Imports section: Imports System
[Code]...
i am trying to copy data from a standard Dataset to a Type Dataset (XSD) of same table structure. i want to use Automapper to do that one. So how can i do that using automapper?
View 1 RepliesI need to pick all data in my application from my database and use it in my form
my question : how to pick all data in my application then i use it
I have two Datagrids, One grid has all the customers garments on it with style number and contact length. The other grid has the users who have garment issued to them. the style number is in both grids. I need to loop through the users grid and say if the contract number is 1 from the first grid then the contract date on the second grid will be todays date + 365 days (year contract) I have looked at using a stored procedure and also a for each command but I am just getting stuck with it all. [Code]
View 1 RepliesI have a problem saving a dataset which contains rows that i have imported from another dataset. i can successfully view the imported rows in a gridview but i cannot commit the rows back to the database.
View 2 RepliesI have multiple datasets that I would like to combine into one. There is a common ID field that can be associated to each row. Calling Merge on the dataset will add additional rows to the dataset, but I would like to combine the additional columns. There are too many fields to do this in one query and therefore would make it unmanageable. Each individual query would be able to handle ordering to ensure the data is placed in the correct row.
For Example lets say I have two queries resulting in two datasets:
SELECT ID, colA, colB
SELECT colC, colD
The resulting dataset would look like
ID colA colB colC colD
1 a b c d
2 e f g h
ok, I've finally got my test database issues sorted out, however now I need to actually modify my existing report to add the two new fields from my test database. I have made a copy of the report so that I am not modifying the original. I have deleted the two old fields and now want to add my two new fields in there. In the Field explorer window, I see an object called "dataset1" and when I expand it, it is using a view that includes fields from the table that I added my two new fields to.
The problem I see here is that I have gone in and modified the view to include these two new fields in my test database - but again, they are not showing up as selectable fields here. I am just assuming that "dataset1" is somehow pointing to the live database again and that I need to change the datasource location.In my solution explorer, I see an object called "dataset1.xsd" but the properties of that do not tell me much about where it is actually pointing to...
[Code]...
I want to access data using both the datasets.
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Try
[Code]....
In my code i have dataset name ds and table named Info1,when i write ds after that how tablename is coming,its not possible? How to do that ?
i am looking to map a dataset of addresses on a map. basically, i want the users to type a street name in my town and be able to see the houses that have signed up already on that street. so a pinpoint should show up on the houses that came up on the dataset.
[Code]...
I have some concern about designing Datasets. I was told that it would be good to have a dataset for each table for maintenance purpose. Because frequent change in database tables is expected, having one dataset including every tables would be pain to make the corresponding change in the application.
Q. is it good approach to have a dataset for each table ( I would end up having 30~40 datasets for each db table using Stored procedure) ?
I have a separate project for commonly used datasets. each project include "dataset project" as a reference, and use it by including needed dataset into Forms, classes, etc.
Q. Does this approach makes the whole system to be slower? If I have a set of datasets as a separate project, it would be beneficial, since It will be easier to make a change (I only need to make modification in one place)
it returns date, and value by date.
for ex:
01.01.2009 454
02.01.2009 785
[code].....
I am having difficulties with Filling a dataset. It seems to be automatically assigning a datatype to the column based off of the first field of data it finds in that column. The column sometimes contains an integer, but it may also contain letters and numbers. If the first field is an integer, it says the fields in the column that contain a letter are DBNull. I'd like for the entire dataset to be formatted as a string/text type since I do not know what the values will be that I'm importing 100% of the time. How do I tell the dataset to expect a certain datatype for all columns and rows i'm going to import?
View 19 Replies
