I have a session which contains a datatable and also have a function which returns a datatable. I need to add these two. How can I do this? The below code is to be replaced with correct code.
Session("Table")=Session("Table")+obj.GetCustomer() where obj is an object of the business layer.
The '+' sign cannot be used to add these two, so how can I do this?
In my project I am using a session table. I am binding this session table to the gridview,in gridview row updating event.I keep the records of session table to a datatable and I use the code below code for updating:
dttable.rows(e.rowindex)("name")="arun"
dttable.Acceptchanges()
My problem is when using PageIndexChanging, I can edit in the 1st page of GridView without any problem, but in second page it is editing the one corresponding to e.RowIndex in the first page, so no change occurs other than the first page in the gridview.
I am trying to pass the datatable of a search query to another page and bind it to a listbox. The problem is the the listbox just displays system.data.datarowview and no results.
I have listed the code below.
First page SQL and session store:
Protected Sub btnSearch_Click(sender As Object, e As System.EventArgs) Handles btnSearch.Click
[Code]....
I have set up a class as a facade to access the session variables for my app. In this app I store an entire dataset for a particular employer as a session variable.Within one of the sub pages I have a button that adds a row to an existing table stored in that dataset.
Dim curRow As Data.DataRow = mySession.tWorksiteOtherMeasures.NewRow()
curRow("lngWorksiteID") = getSelectedWorksiteID(getSelectedSiteID())
curRow("strMeasure") = ""
curRow("lngStatusID") = -1
[code]....
When in the code to add the row the row count increments and the row exists. Once out of that scope the page refreshes due to the button being contained in an updatePanel. When that happens and I click the add button again the row counts for that item reset to 0 and 1 after the code runs. The previous added row is gone.Here is how the Dataset is assigned from the web service:
Public Shared Sub loadDSEmployer(ByVal strUserId As String)
Dim myService As New someservice.service
mySession.dsEmployer = myService.GetEmployerAndSites(strUserId, isInternal)
End Sub
I am trying to display value of the field ("UserID") for every row exists in datatable to checkboxlist(make the checkboxlist item selected).
I used for loop, but only the field value from last row of RoleUsers table is selected in the checkboxlist.
Here is my code
Private Sub DisplayRoleUser()
Dim conn As SqlConnection
Dim cmd As SqlCommand
[Code].....
I have a datatable and I apply a filter to the defaultview.rowfilter property of that datatable. If I then loop through the rows collection of the datatable, will I only be able to see those rows that the filter applies to, or will it loop through all the rows?
View 6 RepliesI am working on a project that takes an xml schema and xml data files and places them into a DataTable, the 2 files are generated from a working table that i have written to disk. I wish to load these 2 files into a DataTable. Here is What i have
vb.net
Friend Function CreateTable(ByVal tableName As String) As Boolean
Dim table As New DataTable(tableName)
table.ReadXmlSchema(tableName & ".xsd")
[code]....
this however produces the following error on line 3
Quote:
System.ArgumentException was unhandled Message=DataTable 'get_item_list' does not match to any DataTable in source.
get_item_list is the parameter passed into this function (tableName)
I have a datagridview bound to a datatable setting its datasource property to the datatable. I would like to have a child form that contains a list of columns associated with the datatable that contains a checkbox that will allow the user to hide and show the columns ( I do not know the best control to use here) (I assume this is the easy part as All i need to do is loop through each of the datatable's columns to get the column name)
now I would like save these visible columns on some event like form_closing so that the next time the user opens the form up it will remember the settings
I came across a problem with using a BindingSource as my DataGridViews.DataSource. Whenever I applied a filter to a column in the BindingSource and the user makes changes that don't match the column filter the DataGridViewRows would automatically disappear. A similar thing would happen when applying a Sort to a column. If the user made any changes the DridGirdViewRows would automatically sort causing rows to be moved around. This was not ideal for my application and there isn't anyway to stop this from happening with the BindingSource.
To correct this issue I have to use subsets of data. I use a DataView to apply the filter and sort to the main DataTable, which creates the subset DataTable.The problem is when I use the DataView.ToTable method I loose the Primary Key and RowError information. So I have to reapply this information everytime the user filters or sorts the DataGridView.Is there a better way to get a subset DataTable?[code]...
I have a datatable that has a resource in one field and hours used in another, it looks like this -
Resource Hours Used
Manager 1
Accountant 1
Field Staff 2
Accountant 3
Manager 4
Manager 1
Administrator 6
Field Staff 4
Manager 0.5
Administrator 1
What I want to do is be able to create a summary of the data table above that groups multiple occurrences of a resource and adds up the hours used for that resource, creating a summary that looks like this -
Resource Hours Used
Manager 6.5
Accountant 4
Field Staff 6
Administrator 7
I have a DataTable oDT. oDT is populated from SQL Server with 6 columns including a column "bAAA" of varbinary(200) I have a function fx(ByVal byteArray As Byte()) as String I would like to add a calculated column to oDT something like this:
oDT.Columns.Add("sAAA", GetType(String), fx(bAAA))
'bAAA is not declared
oDT.Columns.Add("sAAA", GetType(String), fx("bAAA".ToArray))
[Code].....
i have a problem when add data into dataTable. The problem is that after populating the dataTable with the 1st, and when adding a 2nd column, the row that contain the data is not at 1st row of 2nd column. It is directly under 1st column row. For example, column 1 has 10 rows of data. After adding the 2nd column, the data is at row 11 instead on the 1st row. Can someone tell me how to add the data for 2nd column so that it will be in the 1st row. Code for adding the data
Dim col1 As DataColumn
Dim row1 As DataRow
col1 = New DataColumn("Column 2", System.Type.GetType(" System.String"))
dTable.Columns.Add(col1)
[code]...
I've VB.NET function that reads data from an Excel sheet and adds rows in a Datatable.
Private Function LoadDataToRows(ByVal TableName As DataTable, ByVal Header As System.Collections.Specialized.StringCollection) As Boolean
Dim HeaderDataExcel As String = String.Empty 'Data Header
[Code].....
How do I go about adding a ButtonColumn to a DataTable.
I am basically using a DataTable as the DataSource of a DataGrid and need to add a ButtonColumn to the DataTable so that when I DataBind it to the DataGrid it all works.
Although when I try
dt.Columns.Add(buttonColumn)
This is not allowed. It has to be a basic DataColumn.
Is there a simple way to assign a populated datatable's columns to another empty datatable? That is, I want to copy a datatable's structure only but not its data.
View 6 RepliesI'm using vb.net 2010.I have a DataSet with a Table and data. MyDataSet1 which contains Table1 I want to create another table that is the same as the Table1 but without data, but it should have the columns, etc.
View 1 RepliesI am getting array of selected datarows from a datatable.select.I use the commands below to get that array or datarows
Dim foundRows() As DataRow
strExpression =
Here is what I tried.I have looked at examples by MS but they all just write to the screen and I have no interest in that.
For Each rowWork In foundRows
dtWork.Rows.Add(rowWork)
Next[code]....
"LineOfBusiness = 'CPP'"
foundRows = modXchange.pdtWork.Select(strExpression)
Now, I want to place the rows from foundrows into an empty data table.I did what I thought was the obvious but that only returns a bunch of rows with no data
load the contents of a query from a dataTable Adapter into a datatable?
View 2 RepliesI am trying to add NewRow to the database by using datatable in dataset, but before I do that I want to make sure that row is not already there. I create new row for the datatable I am working with, fill it with information. I fill datatable with the row from database that has the same primary key as my NewRow by using tableadapter.fill method, but when I do that my NewRow that was never added to the datatable is filled with information from database(and not information that I assigned to it). I count rows in my datatable before I fill it and it's 0, so why is my NewRow affected by Fill command? (I am using VB.NET 2005 Framework 2.0)
[Code]....
See the code below which is triggered on a datagridview row validation event where the datagridview datasource is a datatable.
The messagebox shows that it loops around as expected populating the datarow with the expected values (NOTE: There are no primary keys as this is a college assignment with specific requirement and all fields can be nullable).
I had to use ImportRows as AddRows would always error due to "This row belongs to another table" the odd thing was the values were different and again the table contains no primary keys.
The code below runs but never adds a datarow to the dataset datatable "Bookings", does anyone know what the problem might be?
CODE:
I am trying to add a datatable to a database. Here's what I've been trying:
Dim newDataTable As DataTable = New DataTable("Example")
VocabularyDataSet.Tables.Add(newDataTable)
SqlDataAdapter1.Fill(VocabularyDataSet.Tables("Example"))
I've tried various incarnations of Fill and Update. But the tables will not save on the database!
I have an array which holds the following items
for example
Quote:
myArray(0) = (1)
myArray(1) = (4,2)
myArray(2) = (10,15,20)
[Code]....
and then am trying to add other column based on items available in myArray().
I'm trying to copy one row from DataTable to another, I looked almost everywhere and I can't find a reason why this is happening, I'm using ImportRow and still the New DataTable is empty. Here's one of the answers similar I found and It's still not working!:
Dim newTable As New DataTable
Dim dsFrom As New DataTable
For Each DBShoes In list
Dim iShoeID As Integer
[code]....
how to copy data from datatable to table in dataset i ry this but its readonly property
ds.datatable1=newdt.copy
I have an asp.net application where I have a datatable ("DataTableA") that returns just one column ("ProductID").
I want to read each row of "ProductID", process some business logic, then copy both those columns (ProductID & ProductIDBusinessLogicValue) to DataTableB. This DataTableB is then displayed on the asp.net page.
What would bhe the best way to read each row of DataTableA ?
I am updating a data table (dt_report_crypt) from an encrypted csv file in the code below:I decrypt the colums and update the same dreport_crypt, such that it will contain de-crypted data.This part is working wellI however need to use this de-crypted datatable as a data source to update a second table(dt_report), using the sql SELECT command to filter relevant data,
Dim dt_report As DataTable
Dim dt_report_crypt As DataTable
Using cn As
[code].....
I have a select statement and it will go to a datatable object, I would like to do the following
textbox1.text=datatable(first field value)
textbox2.text=datatable(second field value)
textbox3.text=datatable(third field value)
Is there a way to nest a datatable into another datatable? I know you can do this with gridviews but thats not what I'm looking for.
Also, I don't want to merge the datatables. What I'm trying to do is have a datatable with 2 columns and each column containing different datatables.
I have a function that converts a .csv file to a datatable. One of the columns I am converting is is a field of names that have a comma in them i.e. "Doe, John" when converting the function treats this as 2 seperate fields because of the comma. I need the datatable to hold this as one field Doe, John in the datatable.
Function CSV2DataTable(ByVal filename As String, ByVal sepChar As String) As DataTable
Dim reader As System.IO.StreamReader
Dim table As New DataTable
Dim colAdded As Boolean = False
[Code]...
listA is list of integerdtListB is DataTableI'm checking that if StudentId of ListA doesn't exist in dtListB, then add it to the dtListB.
Dim stidListA, stIdListB As Integer
For Each la In listA
stidListA = la.StudentId
[code].....