I'm moving from vb6 to vb2010. I have couple of questions:How to add an activex component to a vb.net project? Where to look for it after installed?How t add a .net reference to a vb.net project? Where to look for it after added?
View 4 RepliesI m working on one of vb6 projects. There are total 3 projects. One of them is ActiveX Exe is and has main method, second one is also AxtiveX Exe but doesnt have main method (only Classes) and third project is of ActiveX Dll.Well I m trying debug and issue and trying to put all 3 prjts in 1 Group prject but some how I cant add reference of 2nd prject into the first one. I get an error of " cannot be referenced because its project type is exe" but I can add a ref of its compiled exe but this doesnt help in debugging of whole prjt.
View 7 RepliesI am trying to load an actixex component in a VB project which was made in Visual C++.n VBA it works fine.In VB6, when I try to load the component on the toolbox I get an "Error 35005"In VB2008 the component can be added to the toolbox, but when I try to place it on the form, the following error occurs: "Failed to import ActiveX control. Please ensure it is properly registered."
View 1 Repliesi'm trying using VB6 activex controls in VB2010. but i recive some registry errorsi try google search, but they speak about install VB6(i try but don't works).and theres a text from here:
View 8 Repliesi compiled 1 control in vb6. now i'm trying use it in vb2010, but i recive 2 warnings:
"Warning1A reference was created to embedded interop assembly 'stdole' because of an indirect reference to that assembly from assembly 'AxInterop.Sprite'. Consider changing the 'Embed Interop Types' property on either assembly.WindowsApplication1" and "Warning2 reference was created to embedded interop assembly 'stdole' because of an indirect reference to that assembly from assembly 'Interop.Sprite'. Consider changing the 'Embed Interop Types' property on either assembly.WindowsApplication1 "why these warnings? (i have sure that in vb6 don't give me any errors)
I have a VB6 based ActiveX dll file.
When i create a new Visual Studio 2010 web site, and i try to add a reference to that dll the following error appears:
A reference to 'dllName' could not be added. Converting the type library to a .NET assembly failed. Execution of the following process failed: C:Archivos de programaMicrosoft SDKsWindowsv7.0AinTlbImp.exe "c:mystitedllName.dll" /transform:dispret
[Code]....
If you delete some of these two functions the error doesn't appears. This problem is not present in Visual Studio 2008 or 2005.
I develeped VB.NET solution composed of two projects: 1 Win Form project and 1 class library (.dll) project.I need to import all the .NET solution to a "Lab View" project ("National Instruments" product) as an ActiveX object (or suitable LabView object to import from .NET as well). The "Lab View" view interface shoulf have a button which call the WinForm interface.Is it possible? I think that there could be some problems with Win Form project, that is difficult to set inside an ActiveX .NET project.
View 2 RepliesIs it possible to convert a vb6 project into a vb2010 project?
View 6 RepliesI am attempting to move Visual Studio 2008 project from an XP Pro development environment to a Win 7 64-bit Ultimate environment. In the process of doing so, I have one ActiveX COM control that the project uses. I've installed that control using the maker's installer. Now, when I open the project, the project cannot find the control, etc. - "The system cannot find the reference specified." I also tried moving a particular file to the system32 directory, as per a possible fix they posted, but that didn't help either.
[Code]...
Is it possible to import a vb6 project into VB2010?
View 1 RepliesI am migrating a project from VS2008 to VS2010 (Framework 4)and I keep getting the following error when trying to use databinding with a child property in VB2010.
View 7 RepliesHow to Resolve following Error in .netNon-modal forms cannot be displayed in this host application from an ActiveX DLL, ActiveX Control, or Property Page.
View 1 RepliesI am compiling and importing this multicolumncombo box class. I am able to run the demo program that comes with it without a hitch. However when I compile it for release and include the /obj/Release/CodeSamples.dll as a reference in my C# project, the examples won't work any more. Specifically, selecting an item doesn't work. I can add and display items properly, but when I click on an item, in the VB project it displays the first column's value, in the C# project, it doesn't display anything.
View 2 Repliesi would like the installer to put an icon shortcut to my app created in vb.net. how do i do this?
i am using click once edit:
i am using visual basic express 2008. perhaps it is not possible to add the icon to desktop using the built in installer?
add some sound files to a project. When the program installs it will also make a folder (named "Sounds") and place the sound files there. The idea is that the user should be able to add more sound files here.I have added the sound files through my project properties window esources. In the solution explorer I added a new folder called "sounds", and placed my sound files there.Now, I thought that I could use this code to access my files
Application.StartupPath & "soundslip.wav"
This is not working.
I am very very very Curious , okay today when i opened vb.2005 i click on projectAdd ReferenceCOM(tab)
It showed me different component names, so here is my question
What can i do with those Components? I saw Yahoo Messenger Components/ Bit torrent/ Real Player/ Quick Time and different applications' component to summarize my curiosity
What can i do with them? What is the reason for those components? Are they helpful? Are they ever needed? if yeah please how?
Over and over i keep getting stuck on the idea of adding references to a project. I was looking about visual studios 2010, i clicked the project menu tab, and then scrolled to add reference. When i would click on it, it would bring up a large list to choose from. So, my issue is as follows. I am told to reference via my compile error message a few items. I thought i found the elements i was looking for and pressed OK. When i would try to run, it would still give me the errors.
What am i doing wrong? Am i not doing something correct?
here is my error code, and i looked it up, but for some reason, as stated above, i must not be referencing correctly?
Quotec:\users\fallenreaper\documents\visual studio 2010\Projects\Crystal Report Software\Crystal Report Software\CrystalReport1.vb(99) : error BC30652: Reference required to assembly 'CrystalDecisions.CrystalReports.Engine, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' containing the type 'CrystalDecisions.CrystalReports.Engine.ReportDocument'. Add one to your project.
c:\users\fallenreaper\documents\visual studio 2010\Projects\Crystal Report Software\Crystal Report Software\CrystalReport1.vb(99) : error BC30652: Reference required to assembly 'CrystalDecisions.Shared, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' containing the type 'CrystalDecisions.Shared.RequestContext'. Add one to your project.
c:\users\fallenreaper\documents\visual studio 2010\Projects\Crystal Report Software\Crystal Report Software\CrystalReport1.vb(138) : error BC30652: Reference required to assembly 'CrystalDecisions.CrystalReports.Engine, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' containing the type 'CrystalDecisions.CrystalReports.Engine.ReportDocument'. Add one to your project.
c:\users\fallenreaper\documents\visual studio 2010\Projects\Crystal Report Software\Crystal Report Software\CrystalReport1.vb(144) : error BC30652: Reference required to assembly 'CrystalDecisions.Shared, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' containing the type 'CrystalDecisions.Shared.RequestContext'. Add one to your project.
I have developed a VB.NET application that generates code in a specific format. It has a multitude of features and everything works great. I recently added the ability to save generated code to a text file as well as the ability to load those text files into the application. I am looking to add one last feature (perk). I want to include a bunch of pre-coded text files with the application, that new users can load and use immediately. As of right now I have the application creating the directory they will go in, but can't find anything on how to include the text files and have them placed in that directory. This application uses one-click deployment (in case that matters).
View 1 RepliesI am adding all of my files as resources into my project (so they will work on another computer) however, I have some videos that I added as a resource for playing with AxVLC and I can't seem to figure out how to get them to work. I'm getting an error :Error 1 Value of type '1-dimensional array of Byte' cannot be converted to 'AxAXVLC.AxVLCPlugin'.
View 7 RepliesI have my project all set up but I can't seem to fiqure how to put the Access Datbase on it. I am running Windows 7 OS and I am working with VB 2008. I select SERVER EXPLORER and connect to a Data base and choose Access Database file. I click browse and I can find anything.
View 10 RepliesI have a visual basic 2010 project with a solution. When I double click the solution the project opens. I cannot see the solution file. I am trying to add an existing project to my solution but I am having trouble.How do I add an existing project to an existing solution?
In VB 2005 if I double click the solution the solution opens with the project underneath it. But in VB 2010 they have made it complicated apparently.
Is that Possible to add icon or pic to exe file of my project after build the exe?
View 4 RepliesI develop a student information system with vb.net where marks of previous years and preference of subjects of students are recorded. finally according to their preference and available resources at the department, students are granted two subjects for each one for higher studies.In the system we have to get information and output the student detatils and their subject.problem is if administrator would need to add new subject to the project.I have design this only for 5 major subjects and their major2 subject
View 3 RepliesI've added a C# project to my VB.NET solution and I'm trying to access all of the classes and namespaces within that C# project.However, I'm not having any luck. I've never had to do this before, so I'm a bit lost.After adding the project, I tried importing the namespace from it. When I do, I just get the green squiggly telling me that the namespace doesn't have any public members or couldn't be found.Since it does have public members, I'm assuming it's the latter issue.So is there anything I need to do in order to access besides just adding it?
View 2 Replieshow to add the resources but how would I call them in the code? For example I created a picturebox then I added all the pictures I want. If I wanted to display a different one how would i do it in code?
View 2 RepliesFor some reason, I am having trouble adding the WinHttp dll to my vb.net project. I tried changing the framework from 3.5 to 2 but that didnt change anything. When I try to add the COM component as a reference to the project I get this Error.
A reference to 'Microsoft WinHTTP Services, version 5.1' could not be added. This is not a COM component. I'm using vista 64 bit and I made sure the register the dll when I added it to the system32 folder.
I'm trying to add a Crystal Report to a VS 2005 VB project.Here's what I do: Right-click on my project, Add -> New Item Crystal Report Add a report with the standard report wizard (or just a blank report
[Code]...
UPDATE: OK, something's really screwed up. When I inspect the Me object above, it isn't even putting out the kind of object I expect. I think I may need to piece together the solution again.
my program does not work on other machines.although they stood Framework & adodb.dll.writes that the error in the "Update".
View 7 RepliesI have a class library called Encrypt.dll that I added to my project (that class encrypts strings..). I have a problem that when I drag the app out of the Release folder, it crashes, giving me this error:Could not load file or assembly 'Encryption_Class, Version=1.0.0.0...' or one of its dependencies. The system cannot find the file specified.What am I doing wrong?I added it from the Reference tab->Add->Encrypt.dll
View 4 RepliesHow does one add a bitmap to a project so that you can refer to it by name? i.e. MyProject.MyBitmap.bmp
View 2 Replies