In our VB.Net application, we print a no. of documents (pre-printed forms); Since the formats of these forms vary client to client, we want to provide an option for client to adjust the alignment while printing. Is there an option which will enable the user to move a data element (that is printed) up / down / right / left so that the alignment comes out correctly without calling for the help of programmer?
View 1 Replieskeep controls stationary on a status strip?
View 2 RepliesI am looking to print invioce numbers on stationary. So, for example, the invoice number is located in cell I1 of the excel spread sheet and starts at 100600. I want to print 150 invoices with the invoice number going up by 1 in each increment. So, I have thus far written:
[Code]...
What i need to achieve as you can now see is that the macro picks up the invoice number and does this however many times (or however many invoices I want to print.
U[code]...
So far no matter what I clicked in printpreview, the showdialog returns cancel?How can I tell if the user did print? I'd like to clear the print queue of items if they did actually print to a printer or ask them if I should clear it, but only if they actually did print something.
Currenly im doin an project internet cafe management in vb.net2005 . On dat proj i need to retive no. of pages printed how to capture no. of documents printed in vb.net
View 2 RepliesWith VB or C#, I need to print some pre-printed form (invoice, payroll ..) with a preview on the screen. I do that with GDI+ and PrintPreviewDialog.I have the pre-printed form as a jpg file. First I draw this jpg file then I draw all text to fill the form.
Dim myBackground
As New Bitmap("D:Ressourcesinvoice_12.jpg")
e.Graphics.DrawImage(myBackground, 1, 1)
[code]......
how to design a report to be printed. I have a table of data, and some textboxes with more data. I save this to a file using binary formatting (it's a small amount of information).I want to be able to print this table and data onto paper but I cannot work out how to do it.Do I have to use graphics to design a report? Do I then add the data?Basically, I want to be able to add a table of data and the other sections of data to a report and print it?
View 2 Repliesi want to write a program to get nuimber of pages printed from a specific printer. i spent a lot of time for googling and i finally managed to get acode that is posted in this link given below [URl]..the problem with above code is its getting no. of pages printed but not getting no. of copies printed for eg: if no. of pages to print is 2 and no. of copies is 3 the total no. of pages printed will be 6. but im gettin total pages printed is 2 ie no. of copies is not getting
View 5 RepliesI am using visual basic 10 to make simple application that print and make invoice iam all most done but is there any way to keep a record of invoice maked by a referance number and when user want to see the record, he or she just enter the reference number and he got the printed or maked invoice.
View 1 Repliesi need some suggestion regarding which approach to use to print on already printed bill.what i want to do is, i have already printed bill, which contain some design,name , shpper details and other things.
there is some predefined section on that bill where i need to print amount, using my vb.net application.
so can you let me know which method i should use?
I wrote a program to print deposit tickets using pre-printed deposit forms.The forms are the ones used by Peachtree Accounting.I have used this program with three different printers.All three printers are HP.Now I am using the program but the printer is a Lexmark and the print no longer lines up with the form.The print is now about 3/16" below the place where it was printing.I can change the program to reduce the starting place of the print but if another printer is used the print will be off again.If the HP printer is used then the print will be too high.How can I take this in account for each printer that may be used? [code]
View 12 RepliesI am having a problem, my Printpreview is showing 2 pages, but only printing ONE.. Here is the code... PLEASE HELP.
Imports System.Drawing
Private Sub ChooseTerm_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim bk As New dbase("termabsent")
[code]....
I am trying to print an image (from file) to a the printer using a PrintDocument.I am re-sizing my image so that it is scaled to be full page on the printout when I print this the image is cropped slightly.
EDIT 2:I am using the margins to calculate the area to use:
With printSettings.DefaultPageSettings
Dim areaWidth As Single = .Bounds.Width - .Margins.Left - .Margins.Right
Dim areaHeight As Single = .Bounds.Height - .Margins.Top - .Margins.Bottom
End With
The bounds of the page are 1169x827 (A4) and with the margins it is 1137x795.After resize my image size is 1092x682 and I am using the following code to draw it:
e.Graphics.DrawImage(printBitmap, .Margins.Left, .Margins.Top)
The annoying thing is that when I print to the PrintPreviewDialog it is scaled perfectly but when I print the exact same code to the actual printer it does not fit.
EDIT 3:Full code can be found at this url Usage:
Dim clsPrint As New clsPrinting
With clsPrint
.Landscape = True
[code]....
How can i make a program that can get number of page that printed by special printer?
For example: my printer is HP 1015
i want check my printer by timer every time of period and when printer start to printing, get number of page that is printing...
I have a RTB. The entry is generally short, but the user can change the font, font size, bold, color, etc. When I print it, I want to make sure that it does not exceed a single line. In my case 5 inches. How can I measure the length of the RTB.rtf, in inches, as it will appear on the printer?
View 3 RepliesI have 4 panels and I want them to be shown in PrintPreviewDialog and also to be able to print but suddenly,Theres a error [code]
View 2 RepliesI have a little program made by my in earlier VB6 to print some labels to lpt1 printer Now in VB2010 i want to send a string to lpt1 to be printed but i cand find the way I have this string and i want to copy to lpt1, how please
'Dim labelPrint As String = "^XA^PRC^LH0,0^FS" + _
' "^LL114^MD0^MNY^LH0,0^FS" + _
"^CWI,E:ARIAL.FNT" + _
[code]....
from a menu the user can choose print/printpreview. When the document is physically print then I wish to update the db to show this. I can put code in the sub that handles the printing but how do I know if the print is for a preview or not i.e. how do I catch the print button from the printpreview dialog? and how do I stop the db update if only previewing?
View 3 RepliesI am bringing in data to a richtextbox but when I bring it isn't aligned like i thought it would. Is there a property or something i need to enable to get this to work. Here is how I would have imagined it to work:-I figured this wouldn't display correctly.this was just an example, but was hoping to have the asterisks display even with the last asterisks on the first line and the slash on the last line.
/************************
* *
* Some Text *
************************/
The text when i look at the .Text Property and click the magnifying glass shows it like i would imagine but within the control itself the alignment is all over the place and doesn't make much sense how it is doing it. If i bring the same text file into notepad it all looks fine and is also aligned correctly.what I need to enable to get this to work?
I should also mention that I thought maybe it had something to do with tabs, but when i view the .rtf property for many of the lines that should be aligned still are not even without tabs.
I execute the command: PD.Print()How do I find out if the document has printed?I found the code but I'm not sure which PrintQueue value to check.Dim PrintQueue As PrintQueue
Dim JobIdentifier As Integer
Dim ReturnValue As PrintSystemJobInfo
returnValue = PrintSystemJobInfo.Get(printQueue, _
jobIdentifier)
I have a long text in a string and I want to print them. I can set margin top, left and right like microsoft word format, but how to justify the text and set the spacing of each line like microsoft word?
This is my example :
Public Class Form1
Private Sub PrintButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles PrintButton.Click
PrintPreviewDialog1.Document = PrintDocument1
PrintPreviewDialog1.ShowDialog()
[Code] .....
What should I do to set the text to justify and set spacing to 1.5 for each line for example. I want print out the text just like microsoft word format.
Nothing is printed in my debug output window anymore.
Debug
.Print does nothing.
"Debug > Output" shows empty Output window.
Note: "Tools / Options / Debugging / General / Redirect all Output" is checked.
software developer
I have got around 20 labels in my Windows Form I made some value to be appended to the text in all the labels in a new line, by using a for loop, on button click event. My problem is when i press the button the data is getting printed in the third line. But I need to make it printed in the second line only, irrespective of the number of time time click event. Can any any one suggest how to do it.
View 6 RepliesI have an application that generates large number of printed pages (in the neighborhood of 20,000). Occasionally one of them appears as blank when it should contain an output. Is there a way to detect a blank page during the print page event?
View 2 RepliesI'm in the process of making a barcode printing program for my job. The barcode is printed by printing text using font "WASP 39 LC". I have it automatically determining the correct font size of the text so that it will stretch from the left edge to the right edge, but the barcode isn't very wide (or tall), It's only about a centimeter tall (when printing a 9-digit number).
[Code]...
I need to know if the report displayed in the ReportViewer control was printed by the user and on that basis to maintain a log of printed documents. Originally, in VB6, with ActiveReports performed it with a very simple instruction:If Me.Printer.Status = ddJSCompleted Then...
I can not find a similar property in ReportViewer. Is there any way to tell if a document was printed?
when i input a data to 3 textbox, the data appears to the "ListView" problem is when i enter another data the first input also been printed out to the "ListView". i need it to print in the "ListView" one at a time. [code]
View 2 RepliesI'm trying to determine if a user has printed a report from the ReportViewer control, so I can write the date/time and username to a database table as part of an audit trail.When the user opens a report there is a print button, which calls up a standard print dialog box.However I can't find any way to determine whether the print button has been clicked or not. The reportviewer has a Print event, but this is no good as it's called before the print dialogue is displayed.
View 6 Repliesi want print richtextbox but its text alingment is wrong i am using that code i am using print document
Dim Con
As
New SqlConnection
Dim Da
[code]....
its print my text like this ("Building 34989,Street 4564 ,053534-345,4533 ,U.K")but i want like this
("Building 34989,Street
4564 ,053534-345,
4533 ,U.K")like richtextbox text
How is it posible to align each "Column", so that, no matter the size of each value, the columns line up perfectly under each other. I'm using a listbox for the output, I thought I had an understanding of this but apparently I don't. I am using a fixed width font and the screenshot shows my results. I have done this before but not in awhile.how to set up the zones. I know the minus sign in front will left justify the column results but I'm having trouble with the other columns.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim fmtTicketInfo As String = "{0,3} {1,-20:} {2,20:c2} {3,20:c2}"
lstTicketBox.Items.Clear()[code]....