Analysis On The Who Wants To Be A Millioniare Game ?
Jun 3, 2011To write a problem analysis on the who wants to be a millioniare game, and i don't know to go about it.
View 1 RepliesTo write a problem analysis on the who wants to be a millioniare game, and i don't know to go about it.
View 1 RepliesIn Guitar Hero the notes are saved on a .mdi file how can read the file ( analysis not audio playback ) ?
Attached File(s)
American_Idiot_MIDI.zip (1K)
Number of downloads: 97
I'm reading data from the microphone and want to perform some analysis on it. I'm attempting to generate a spectrum analyser something like this:
What I have at the moment is this:My understanding is that I need to perform a Fourier analysis - a Fast Fourier Transform ? - to extract the component frequencies and their amplitudes.
Can someone confirm my understanding is correct and exactly what type of Fourier transform I need to apply?
At the moment, I'm getting frames containing 4k samples from the mic (using NAudio). The buffer I've got is 16bits/sample (Signed Short). For reference, the above plot shows approx half a frame I'm coding in VB so any .Net libraries/examples (preferably on NuGet) would be of most use. I believe implementations vary considerably so the less I have to massage my data, the better.
documents that are required for a project. Such as:e.g: What sort of document I have create at the requirement analysis phase...etc I need to know all the documents that are required from start to end of the software project.
What's the part that MSF (Microsoft Solutions framework) plays?If we need to use MSF, what sort of documents that are required from it?
Write a program to analyze a list of grades to determine the number of A's, B's, C's, etc. after applying a curve percentage selected by the user. When the form loads it should contain all the grades and available curves in the list boxes on the left. The user selects a curve and clicks the "Apply Curve" button. The program should display the curved grades (based upon the selected curve) and the grade distribution in the list boxes on the right?
View 1 RepliesI'm using VB 2005, and am hoping to have streaming video to my application with some sort of video analysis. Right now as a test, I have an axWindowsMediaPlayer control playing a video from a URL. I'm figuring I need to be able to detect the colors of the pixels in the video for simple analysis, but I haven't been able to do this yet. I've been able to view the pixel colors in every area of the screen except for the media player window (just shows up black, as if you were to make a screenshot of the media player video). Is this at all possible to do?
View 1 RepliesI decided to try the Code Analysis tool that came with VB2010 (at some levels). It produced LOTS of fascinating comments. Many of the comments make no sense, such as one about not disposing of a type on all paths when there is only one path that ends with an explicit call to object.Dispose. I think the analysis engine is looking at some of the calls, but they all return to the caller properly.
[Code]...
I intend to choose developing a Web Content Management System using asp.net with VB.net 2008 but I'm not sure about how long it takes to program such system. Is 4 months enough for developing such system? This 4 months is the duration of this semester and Includes about two months for analysis and design and the rest is left for implementation.
View 2 RepliesI have been tasked with getting a asp.net (vb.net) talking to an analysis services engine on our production servers. The web server is a separate machine from the web server.The web server runs as the IUSR_ user.The application (of course) works on the development machine which has both IIS and Analysis services on it.The problem I see appears to be a permissions error (returned in the browser by the asp.net app):An existing connection was forcibly closed by the remote host ....
it is described in a similar post here: http:[url]......I am not a system admin, nor am I an expert in analysis services (why have I been tasked with this you ask? because other people haven't been able to get it working and it has fallen on me). I have tried creating and adding the user (IUSR_) to the sql server and added that user to the role. While that worked on my local machine, it did not work in our production environment where the sql and web servers are separate.
Anyone know a good code analysis service or tool for vb.net? Like the one for c# with visual studio 2008 team edition or style cop for c#
Update:I am only using the visual studio pro in my new work place,so I could not use the code analysis for visual studio 2008 team edition
With this assignment, you are provided with an incomplete object-oriented implementation of the GAME MANIA software system based on Visual Basic 2008. The specification and the subsequent modelling are explained in a case study titled Game Mania: GAME AND GAME CONSOLE RENTAL STORE.
An implementation of the following classes are made available as the basis of your development work:
1.Member
2.Stock
3.Stock Item
4.Optic Reader
5.Card Writer
6.Membership Card
[Code]...
Note that the user interface provided is very basic. You need to change it, as you feel appropriate so that it will reflect the required functionality. For example, in the present implementation version, no provisions were made in the user interface for querying and handling fines associated with late returns.Providing this aspect in the user interface might be necessary as part of handling renting of games and game consoles.
I have a website where people do the data entry. I have data stored in SQL server.Now I need to push the data to 3rd party to do some analysis work.What are my options to do this kind of job?
View 1 Replieshow we can connect dictionary with an application in vb.net for morphological analysis of a text
View 3 RepliesI'm writing a threaded multi-client chat application in VB.NET(2008). While the thread is running and a message is received from the server(in this particular case: "ping") i wish to copy the content of the variable holding the newly received data to another variable(as that first variable is constantly changing) and then later call the Checkmsg() sub which contains a select case to analyse the string and notice a particular command(in this case, when it notices "ping" as received data, I want it to send "pong" back to the server.) and react to it. Now the problem is the code actually "jumps" to the Checkmsg() sub, and fails to compare properly the received data to my select case argument. I've tried setting messageboxes at a couple of place to see if my data was somehow changed but even before the line that compares the two strings the message box prints "ping" and the select case is set to react to "ping" but it wont "move". Now I don't really understand, i've done much vb programming but i'm learning threads.
[Code]...
Im trying to make a scholarship analysis. i want it to be determined by percentage points using the following criteria.
OVERALL GPA
MAJOR GPA
VOLUNTEERED HRS = NUMBER OF REPAIRS * 4
VOLUNTEERED T SHIRT HRS = NUMBER OF SHIRTS * 10
I have inputs for the users name, academic status, overall gpa , major gpa , number of repairs and number of shirts. so how could i use the information to give the user say like 10 out of 10.. if they have 4.0 and alot of hours.. or like 6 out of 10 if they r an average students and have little hours used.
what im after is advice on writing a vb app. that compares the difference between two images captured from a cctv camera of a sports shooting target. the difference is a bullet hole in the target. i would also like the program to identify a score the bullet makes in relation to its location on the target and have that as an audio output sound file. the targets will be uniform so the template the program has never changes.
View 4 RepliesI am writing a VB.NET Windows Application which takes numeric user-input and performs a complicated calculation, yielding many numeric output variables. Previously, I wrote a similar program in VB6, which output the results to a rich text box using fixed-width font in order to organize data in columns and used asterisks to delineate table areas and section borders. I then used the printer object for printing the output. This method was very archaic and difficult to modify when changes were necessary.
View 5 RepliesWhen running code analysis on my project, I receive the following message:
CA1051 : Microsoft.Design : Because field 'ClassName.VarName' is visible outside of its declaring type, change its accessibility to private and add a property, with the same accessibility as the field has currently, to provide access to it.
Public VarName As String to this:Public Property VarName As String
I don't understand why the Property keyword is so important in this particular case. Can anyone provide an explanation as to why changing this member to a Property makes a significant difference to code analysis?
im trying to make a game in visual basic in which your character can move around, jump, and kill things. I can get the picture box with the character to move and everything is fine. but i did run into one problem. when the character moves over a tree (or something) you can see the gray backround of the character as i made in paint. how do i make the backround of the picturebox transparent?
View 4 RepliesI want to make a program that enables a game to have more than one instance running, where it would otherwise be unable to be done. How should I go about this? A sandbox? Hack?
View 3 RepliesIm new to VB. how do I get to add the score.my code is
[Code]...
I am working on a poker game and I have the game setup the way I want it in terms of graphics and I have the code programed to deal the cards out exactly how I want them. Granted, the code is very simplistic, but functional for a new programmer like myself. I'm sure there are other more efficient ways to code my game, but I like mine so far because I can at least understand the majority of it. With that being said, here are a few problems and questions that I have.
1. How come when all 12 cards are dealt out I have some cards repeating in the game? For example, I get queen of diamonds in more than one picture box when I only want the card to be dealt once and then removed until the next game.
2. I was hoping to have a button 3 to clear all the boxes, basically resetting the game to the next game. When I hit button 3 it only clears the contents of picturebox 10 and 12.Other notes: I have the deal down the way I want it. It deals the first 10 picture boxes and a second button deals the 11 and 12 picture boxes.
3. I know this is my next step so I want to post it with the code I currently have. I want to start taking my project one step further by evalutating each of the three rows of cards (3 rows of 3 cards each - I'm not worried about the dealers hand (picture box 10, 11, 12 yet). So I want to evaluate a row of pictureboxes against a "pay scale" and display the win in a text box or label next to the 3 card hand. For example, Q of diamonds, Q of Clubs, Q of spades would win 15, etc. ( have a weird feeling I may have to change the names of the cards (I have them named card1, card2, etc. right now) to something that identifies them in order to evaluate the hands.
Here is the code that I currently have. I'm using visual basic.
Public Class Form1
Dim Rndm As New Random
Dim myPB(11) As PictureBox
Dim HiddenCards As New List(Of String)
[code]....
I have created a scrabble game that generates random letters. For the user to type in a word using the random letters they have to type it in a text box.
I want my program to prevent users from typing in letters that are not provided in the text box and to allow them to type in the random letters that are provided.
I'm trying to make a simple fruit machine game for windows mobile device.
I can create the game easily enough and flip through pictures in a picture box to display the correct symbol.. but what I'd like to do is do a proper spinning reel, but have no idea where to even start.
What I have is a list of images in an imagelist (or individual files) - what I'd like is them attached to each other and moving downwards, preferably as though it were going around a drum but just them moving would be a start.
I am trying to make a game which basiclly lets you shoot ducks. i have a picture as a background (set as form image) i then have picturebox's with ducks flying flying around you shoot them the disapear etc.
My problem is the image. i have a picture of a duck and a blue square round it. and i would liketo make it transparant because birds dont fly with blue squares.
Below is an image to illistrate my problem
I have tried adding transparent background, transparant key etc
On programming assignment without having any real experience in vb. I guess I don't understand subroutines that well. When the program runs it never goes to the computer's turn and does not update the users score either. This assignment is already in but would like to know what is going wrong. Using VB 2010, and this is windows application.
Code:
Public Class Form1
Dim Myturn As Integer
Dim Computerturn As Integer
[CODE]...
I'm trying to make a 2D platform game and I'm pretty inexperienced at programming. I've coded the player to move left and right and jump, but I can't figure out how to prevent multiple jumps while the player is in the air. Anyone know how to do this?
View 8 RepliesCheck Score: The winner is the one with the highest score less than or equal to 21If both scores(player total and computer total) are over 21, or if both are equal but under 21, the game is declared a draw.
There is something wrong with this line:
If intPlayerCardTotal < intScore And intComputerTotal < intScore Then
MsgBox "Draw"
[code]......
Upon changing the field size a game should restart. Upon trying to do so I see the previous grid (e.g. 10x10) displayed on top of the new one (e.g. 4x4). How would I prevent this and indeed start the game fresh?
View 10 RepliesSo here is my problem. I have a vb game with animated sprites and all, and the character even jumps. However it only works in the y direction. So if i'm moving, he stops in place and jumps, instead of jumping forward. I was wondering if someone knew how to make him move at the same speed forward during the jump.
[Code]...