Architecture Of My Application - Proceed With The diagram?
Apr 14, 2010
I am beginner in programming and developed an application of mine. Although, I am finished with the coding part, but I have to present my software architecture diagram. I am not a software engineer and so familiar with basics of software engineering, layering etc.I have used 1) .NET GDI Graphics in my application, 2) Text to Speech, 3) RichTextBox which retireives pictures etc. How do I proceed with the architecture diagram now?
Using VB.NET 2008 I want to know what is 3 Tier Architecture for windows application? How to make a code for Inserting, Deleting, Updating in a database using 3 tier architecture.
Building a large application using 3 tier architecture in vb.net. Question: I am a vb.net developer. I have developed small and medium size application with 2 tier architecture. Now I am going to develop a large application. I have decided to develop that application using 3 tier architecture. So I studied about 3 tier. Now I know how what is 3 tier and how to develop a simple application. And also I studied about .Net Remoting and Web services. In my project, 7 modules are available. Each module has 3 layers. How can I manage in a Single Solution?
I'm creating a rather large and complex application and was wondering if any of you had any recommendations for good books on application and project architecture. Multi-user - database - heavy interaction with windows api for shell extensions.Not the standard maintenance or reporting app I usually write!
I need some guidance on the best way to proceed with searching a file content.I have a large file (see attachment) that is in text form, some of these files could be upto 50 times as big, therefore creating a huge file.These files contain information that is produced from another application and therefore I am unable to change the format of the file.This file contains information that I want the user to be able to be able to enter search criteria in a form that then searches this file and returns information. The individual information is split into sections of data and this is defined by the section start label lbl{ and the end label }} Therefore the below information highlighted in bold is an individual section
lbl{-32768 21 12 0 text {Equip no: P-102BDescr 1: RECYCLE PUMP-BDescr 2:}}lbl{-32768 21 28 0 text {Equip no: D-100Descr 1: COLUMN RECIEVERDescr 2:}}Now comes the hard bit, in the bold section above you will notice that there is some text Equip no: P-102B I want the user to be able to enter in a form *102B* and for it to return -32768 21 12 0 which is after lbl{ and before text.Now obviously I could loop through the whole file to do this, however I am very concerned about RAM usage and also the time it will take to do this. Obviously the user could use this search option over and over again and therefore we would be searching the same file over and over again. One of my thoughts was to read the file once and output the content in an Access Database table and then use SQL to get the information? However would the user require Access on there machine to be able to do create the database or could I just ship a blank Access database with my app and then copy this and populate? Also I am not sure if Access is the best database, obviously I don't want people to have to use Oracle of SQL as this would require server configuration etc. but are there better free databases out there?
I am suppose to do a VB form where it can be able to read, add, update and delete citectSCADA variables from access .But after entering the following code into my add button. my form jus hang.i tried F11. But still it didnt tell me the problem about it.VB
I am doing a Quiz form on VB.net . How to proceed on to the second question using the same form . I have linked the database to it so now my form1 is the first question . I need to save the answer and proceed to the second question using that same form
I need some guidance on the best way to proceed with searching a file content. I have a large file (see attachment) that is in text form, some of these files could be upto 50 times as big, therefore creating a huge file. These files contain information that is produced from another application and therefore I am unable to change the format of the file.
This file contains information that I want the user to be able to be able to enter search criteria in a form that then searches this file and returns information. The individual information is split into sections of data and this is defined by the section start label lbl{ and the end label }} Therefore the below information highlighted in bold is an individual section
CODE:
Now comes the hard bit, in the bold section above you will notice that there is some text Equip no: P-102B I want the user to be able to enter in a form *102B* and for it to return -32768 21 12 0 which is after lbl{ and before text
Now obviously I could loop through the whole file to do this, however I am very concerned about RAM usage and also the time it will take to do this. Obviously the user could use this search option over and over again and therefore we would be searching the same file over and over again.
What I am wondering is if anyone has an idea on how best to do this?
One of my thoughts was to read the file once and output the content in an Access Database table and then use SQL to get the information? However would the user require Access on there machine to be able to do create the database or could I just ship a blank Access database with my app and then copy this and populate? Also I am not sure if Access is the best database, obviously I don't want people to have to use Oracle of SQL as this would require server configuration etc. but are there better free databases out there?
i'm working on a simple drop down button. all the stuff i tried with context strips ended up misplacing the menu in all the wrong places, so i'm doing a dropdown button with a combobox and a button placed infront of the combobox but not the comboboxes arrow click. what i would like, is to click on a item in the combobox and proceed with command, instead of having to click a go button or such..
also, is it possible to fully customize a combobox? trujade..so much work to do and so many choices to choose from...
I am new to vb .net and I have been writing simple programs in VB4(16 bit) and now I have to convert a particular program to VB .Net. I have never really used the Crystal report in vb to write my reports and I am really lost as to how to proceed with converting the following module to .net equivalence.
how do i have my app read a line from a textfile and if that line equals "whatever" proceed with command, this case a msgbox.so much work to do and so many choices to choose from...
i have a checkbox, when checked, contextmenu shows and remains visible until unchecked.. then i ran into a problem.. if i click any other control on my form, the context menu disappears and the checkbox remains checked. i have tried placing
i'm having a little trouble with a listbox. [Code]. i want the button command to run through the listbox items and proceed with given command. it's not listbox1.items.indexof(#), it's something else i'm missing.
Try Dim s As New IO.StreamReader("C: est.txt") For i As Integer = 1 To 4 s.ReadLine()
[code]....
this only reads one line and proceeds with command.. how can i fix this to be able to read multiple lines, like read line 7, do command, read line 9, do command, etc..so much work to do and so many choices to choose from...
I have built a class diagram for a proram i am building in vb, and i need some help to enhance it.The program description:"Modeling Car Parking System Modeling Car Parking System (MCPS) is the software that manages a parking for cars. The dedicated employees in that parking will use this system to control the parking. This software will facilitate the work in the parking and covers most activities performed, such as booking, cashing, and organizing. In the following, we will provide a comprehensive description of the parking (the scope of the system) followed by a description of the system with the functions that will be performed.
The Parking (The scope of the system)The parking consists of two floors, with a capacity of three hundred car places, and opens 24 hours all the week�s days. It has two main control stations; one is located at the entrance gate, and managed by an employee whose main functions are entering data to the system, then providing a receipt to the driver, and the other is located at the exit gate (cashier station), managed by an employee whose main functions are checking the receipt, entering data to the system, cashing, and providing an invoice.
The parking has three barriers, two main barriers are placed at the entrance and exit gates, and the third one is located at the second floor�s gate. They are controlled by using a remote control.When a driver wants to park his car, he has to drive it to the entrance where an employee (receptionist) will enter the car plate number to the system, then prints out a receipt to the driver. This receipt will contain information such as, the car plate number and the entry time. After that, the receptionist will open the barrier to allow the car enters the parking.
Inside the parking, the second floor will be kept empty (closed by the barrier) until the first floor will be full. When the first floor becomes full, the employee will open the barrier to allow the cars to park in the second floor. A driver can park his car in any vacant place in the available floor.When a driver wants to leave the parking, he drives his car to the exit gate and presents the receipt to the employee in the cashier station, who in turn, will check if the number recorded in this receipt (at the entrance) is similar to the real plate number of the car. After that, the employee will enter that number to the system, take the money, provide an invoice to the driver, and finally, open the barrier to allow the car leaves the parking.The list price in the parking, declares that parking a car for an hour costs 3850 LBP, and each extra parking hour will cost 3000 LBP.
Description of the System :The system will operate 24 hours, and will perform the tasks related to the work in the parking. The following scenario will explain what we mean by �will perform the tasks� in the parking.
At the entrance gate, the employee will enter the car plate number to the system as a (driver ID), and select the available floor which is in service from a menu. The system, in its turn, will store these data and additional data such as the time entered, and then issues a receipt including information such as driver ID, entry time, date, and the available floor reference.
At the exit gate, the employee will enter the car plate number (driver ID) to the system which will generate the data related to it, and prints out an invoice including the current time, date, total parking time, and the total amount of money (parking fee); since the parking fee and the duration will automatically be calculated and displayed by the system.
In addition to the tasks which the system will achieve at the entrance and exit gates, it also will provide statistical information such as the total count of cars that exist in the parking at any time, and the number of the vacant or busy parking lots (car places) in each available floor. Also, the simulation which will be part of the system will play a role in managing the parking since it will show an up to date comprehensive scheme of the parking.
The graphical simulation of the car movement flow When a car will enter the parking, and after an employee has implemented all the tasks associated by the entrance such as entering the car plate number, and selecting the available floor, the system will issue a receipt and automatically will lead the user (employee) to the simulation part. The simulation part is a form that contains cars and parking lots as graphical components, when a user click such a button �Drive-in a car� a car will move to occupy an available empty parking lot.
When a car will exit the parking, and after an employee has implemented all the tasks associated by the exit gate such as entering the car plate number, the system will issue a receipt and automatically will lead the user (an employee) again to the simulation part. When a user clicks such a button �Drive-out a car�, the car will leave to parking lot was occupied.
I am busy creating documentation for my application and want to implement xml comments in my class diagram. Is it possible to show xml comments of a class in the class designer/diagram?
I want to draw a software Function Diagram which show the calling relationships between functions in my VB.Net project. Like which function calls which function and what the called function does... I have look through VISIO couple times and can't know find anything I like. What type of diagram should I use? Which template should I use in VISIO?
this is more of a organizational question rather than a technical one. As your project grows and has more and more forms, objects and classes, how does one keep an overview?
Is there an application available which allows you to graphically organize the relationships between forms in a diagram? An "organigram" for your project?
I'm trying to draw some kind of circle diagram. Input data are only two integers: "a" (even or odd) and "b" (even). Here is the
HTML Imports System.Drawing.Drawing2D Public Class Form1 Dim P As New Pen(Brushes.Red, 1) Dim a As Integer = 24 Dim b As Integer = 2 Dim Angle As Single = b / a * Math.PI
I am trying to write a program that allows user input information and plot a bifurcation diagram that looks like this:I haven't program in 2 years so I am all rusty and such. Here is what I have got so far and more information about what I am doing.
Bifurcation: f(x) = kx(1-x) and k = xL + i * (xR-xL) / 500
i m trying to create logigrame or flowchart using vb.net,it s possible using visio,but visio must be installed in every computer that use my application,and we need to buy license of this tool.i have searched in google,i found metadraw but it s not free. so is there any activx or any dll that will replace visio and metadraw??
I was wondering does anyone know where i can find some good books and or articles covering the architecture and design of OOP applications. Also I need a book that explains how to structure an application as it relates to the data tier, business logic tier, and the front end.
In the first comment (by J.W.) to this question: Using ObjectDataSource and DataObjectTypeName, How Do You Handle Delete Methods With Just An Id Parameter?, it is said that using ObjectDataSource is a bad design. What is considered good design for well-architected ASP.NET applications?
To write a effecient Active Directory library to ease the work of technicals who are responsible to create access models into the domain controller's Active Directory. This library must allow the following:Basic operations: Add, Modify, Delete, List entries;An entry may either be an organizational unit, group or user (no further need required as of now);I thought about having a class which would represent the domain with which we want to work with.
public class Domain { public Domain(string root) { Root = root;
We have a small visual basic 6.0 application with an Access DB that we would like to migrate to modern code and architecture. I am not technical, but I am believe this would be something like a .net framework with a SQL Server DB.What I am wondering about, is there any way to covert this code to a modern language/architecture? If so, what is the easist modern language to migrate to?
When trying to determine the Architecture of an OS, I ran across IntPtr.From reading the documentation, I saw this: Quote:The IntPtr type is designed to be an integer whose size is platform-specific. That is, an instance of this type is expected to be 32-bits on 32-bit hardware and operating systems, and 64-bits on 64-bit hardware and operating systems.
Since the size of IntPtr is intended to be the size of the architecture, would it be feasible to test the size and determine the OS by that? Or is there a better way?
I was thinking there might also be a way via WMI, but I don't want to use that for compatibility reason.
