I am doing a Quiz form on VB.net . How to proceed on to the second question using the same form . I have linked the database to it so now my form1 is the first question . I need to save the answer and proceed to the second question using that same form
View 1 Replies
I have a txtbox(for barcode).. if i input a item number in that txtbox and if that number will match in your database, the other information(shall we say, product type, item ID, etc..) will display in my other txtboxes..
View 5 RepliesI am beginner in programming and developed an application of mine. Although, I am finished with the coding part, but I have to present my software architecture diagram. I am not a software engineer and so familiar with basics of software engineering, layering etc.I have used 1) .NET GDI Graphics in my application, 2) Text to Speech, 3) RichTextBox which retireives pictures etc. How do I proceed with the architecture diagram now?
View 1 RepliesI need some guidance on the best way to proceed with searching a file content.I have a large file (see attachment) that is in text form, some of these files could be upto 50 times as big, therefore creating a huge file.These files contain information that is produced from another application and therefore I am unable to change the format of the file.This file contains information that I want the user to be able to be able to enter search criteria in a form that then searches this file and returns information. The individual information is split into sections of data and this is defined by the section start label lbl{ and the end label }} Therefore the below information highlighted in bold is an individual section
lbl{-32768 21 12 0 text {Equip no: P-102BDescr 1: RECYCLE PUMP-BDescr 2:}}lbl{-32768 21 28 0 text {Equip no: D-100Descr 1: COLUMN RECIEVERDescr 2:}}Now comes the hard bit, in the bold section above you will notice that there is some text Equip no: P-102B I want the user to be able to enter in a form *102B* and for it to return -32768 21 12 0 which is after lbl{ and before text.Now obviously I could loop through the whole file to do this, however I am very concerned about RAM usage and also the time it will take to do this. Obviously the user could use this search option over and over again and therefore we would be searching the same file over and over again. One of my thoughts was to read the file once and output the content in an Access Database table and then use SQL to get the information? However would the user require Access on there machine to be able to do create the database or could I just ship a blank Access database with my app and then copy this and populate? Also I am not sure if Access is the best database, obviously I don't want people to have to use Oracle of SQL as this would require server configuration etc. but are there better free databases out there?
I am suppose to do a VB form where it can be able to read, add, update and delete citectSCADA variables from access .But after entering the following code into my add button. my form jus hang.i tried F11. But still it didnt tell me the problem about it.VB
[Code]...
I need some guidance on the best way to proceed with searching a file content. I have a large file (see attachment) that is in text form, some of these files could be upto 50 times as big, therefore creating a huge file. These files contain information that is produced from another application and therefore I am unable to change the format of the file.
This file contains information that I want the user to be able to be able to enter search criteria in a form that then searches this file and returns information. The individual information is split into sections of data and this is defined by the section start label lbl{ and the end label }} Therefore the below information highlighted in bold is an individual section
CODE:
Now comes the hard bit, in the bold section above you will notice that there is some text Equip no: P-102B I want the user to be able to enter in a form *102B* and for it to return -32768 21 12 0 which is after lbl{ and before text
Now obviously I could loop through the whole file to do this, however I am very concerned about RAM usage and also the time it will take to do this. Obviously the user could use this search option over and over again and therefore we would be searching the same file over and over again.
What I am wondering is if anyone has an idea on how best to do this?
One of my thoughts was to read the file once and output the content in an Access Database table and then use SQL to get the information? However would the user require Access on there machine to be able to do create the database or could I just ship a blank Access database with my app and then copy this and populate? Also I am not sure if Access is the best database, obviously I don't want people to have to use Oracle of SQL as this would require server configuration etc. but are there better free databases out there?
i'm working on a simple drop down button. all the stuff i tried with context strips ended up misplacing the menu in all the wrong places, so i'm doing a dropdown button with a combobox and a button placed infront of the combobox but not the comboboxes arrow click. what i would like, is to click on a item in the combobox and proceed with command, instead of having to click a go button or such..
also, is it possible to fully customize a combobox? trujade..so much work to do and so many choices to choose from...
I am new to vb .net and I have been writing simple programs in VB4(16 bit) and now I have to convert a particular program to VB .Net. I have never really used the Crystal report in vb to write my reports and I am really lost as to how to proceed with converting the following module to .net equivalence.
[Code]...
how do i have my app read a line from a textfile and if that line equals "whatever" proceed with command, this case a msgbox.so much work to do and so many choices to choose from...
View 3 Repliesi have a checkbox, when checked, contextmenu shows and remains visible until unchecked.. then i ran into a problem.. if i click any other control on my form, the context menu disappears and the checkbox remains checked. i have tried placing
[Code]...
i'm having a little trouble with a listbox. [Code]. i want the button command to run through the listbox items and proceed with given command. it's not listbox1.items.indexof(#), it's something else i'm missing.
View 2 RepliesTry
Dim s As New IO.StreamReader("C: est.txt")
For i As Integer = 1 To 4
s.ReadLine()
[code]....
this only reads one line and proceeds with command.. how can i fix this to be able to read multiple lines, like read line 7, do command, read line 9, do command, etc..so much work to do and so many choices to choose from...
I have an existing database that I want to add a number to that the user inputs. So lets say that in the database there is 4 carrots, and the user on the addinventoryform inputs 3 carrots and pushes a button. Now I want that number to be added to the database number so in the database there would now be seven carrots. I am using an oledb connection and cannot figure this out.
View 1 RepliesMy VB application is behaving strangley. I have form with fairly large number of controls. I am using case against radio buttons. after curtain number of buttons, it stops responding to more radio buttons.
Then I tried to split controls in to 2 form but now my form.showdialog() too now working properly. It takes new from names but show the old form when running.
i want a button to perform a function of checking the last digit number in a field of a table in and add a digit to it and display it in a textbox.
View 1 RepliesVigenere Cipher which I am trying to code in VB.Net. The main thing is to decrypt to plain text with keys provided. Currently, I did a small code to decrypt NIOZS to COMPU with the key LUCKY. This is done by storing the cipher text, the key text and the English alphabets in 3 different arrays each starting at index 0.
However, I do not know how to proceed on if my cipher text is longer. My cipher text file consists of texts in .txt, every 5 words are group together (e.g. NIOZS ECPQE TOGCG YMKQF E). The keys are all different in lengths. I also understand about checking letter frequency to deduce the key but I do not know from which point to start on.
Can anyone give me some pointers as to how I can get to start for my program? I tried looking for samples but some applets on the web wasn't exactly accurate or I can't start it up after I dl-ed.
If a subroutine is called within a function, does the function always wait until that subroutine is completely finished before it will proceed with the rest of the function? If so, is there any way to make it not wait and continue on with the rest of function and not care what happens in the subroutine?
View 3 RepliesI had a problem with WebBrowser component. Basically, it works improperly when try to log in on one web-site (Forex Trading Social Network | Online Forex Trading Forum and Social Networking Site). I am working with Visual Studio 2010 Professional. I created a simple WebBrowser trying to access the indicated web-site. The problem begins. Well, the website loads, but when you go to the login page (Forex Trading Social Network | Online Forex Trading Forum and Social Networking Site) and try to log in, it doesn't work. I mean, when I enter the login details the login page just refreshes itself and the login wasn't proceed. The same login page appear with every login attempt. The is the current problem!I check with Google, it works. But, it doesn't work with Forex Trading Social Network | Online Forex Trading Forum and Social Networking Site! Why?
View 14 RepliesI am doing a bar cash register and I want to use a if statement to see if fosters button and number 1 on the number pad are both pressed then multiply constant by quantity number
View 1 RepliesI'm wanting to add a random number into a database but before I do this I want to check to see if I alreay have this number in there, How can I do a search to return a true or false I guess answer to if the value is in my access database?
View 22 RepliesThis update command works in updating my mysql database. Another database I have doesn't have a idnum field. I'm looking for a command to select a row number in the database. For example, update row #5. How would I modify this command?
SQL = "UPDATE " & table_name & " SET " & _
"title='" & TextBox3.Text & _
"' WHERE idnum =" & TextBox2.Text
How to sum the number value(textbox) to my database field ?
the red section doesn't sum the value(textbox) to my data field.[code]...
I am using a tableadapter to connect my project to an MS database. I need a a function which counts the number of rows in the table for something which I am doing. I have sucessfully used the count function to count the number of rows for my other tables, but when I tried to reuse it for another table, it wouldn't work. I get an error...
An unhandled exception of type 'System.ArgumentException' occurred in System.Data.dllAdditional information: Input string was not in a correct format.Couldn't store <AH25> in ProductCode Column. Expected type is Int32.
and this is the code which I used
Dim record As Integer = TAProduct.GetData.Rows
Do Until record = TAProduct.GetData().Count
' other codes
loop
It only seems to work if the first column is an integer datatype, which is the case for my other tables, but the table which I am currently dealing with using a string datatype. Is there another way to count the number of rows without using SQL statements or can I adapt my existing code in some way?
I'm having problem in my datagridview.I'm using vb 2008 and an access database. When I create a new record for my item the No column (primary key and autonumber in access) always shows a negative number.How can I make that a positive number and it should follow the numbering in the datagridview.
View 3 RepliesI have a single table access database, where I would like to collect my own working times.I would like to use fracture hours for example 4.5 hrs, 1.5.I have a databounded textbox, I will write my working hours into this textbox.My problem is I can write only whole numbers into the textbox, if I try to write fracture number the textbox doesn't lose focus, I need to stop the whole debug.My access datatable is set for double, so it is allow fracture numbers. When I checked this in VS query wizard it seems ok, but my textbox is working very strange.
View 1 RepliesI created a code that inserts a number into a row every time someone submits a form.I am able to read the data back to the form using a loop.My confusion is I would like to get the highest number from the data field(column)Lets say the Field(column) has five numbers from 1 to 5.How do I get the highest number?I was looking at using a loop to go through the field and bring out the highest number, but should I use an array?
View 5 RepliesI am currently having trouble detecting the number of rows in the table in sql database. I have one column as auto increment, and one column that will show the blkname. But everytime I delete off one row, the program cannot run saying that there is no row at position "up to the latest number". Then, when I try to insert back the row again, the program also gives me the same error. I think the program probably cannot detect the number of rows correctly as it cannot like detect if there is 5 rows in the database and if you delete one row, it will give me the error. The above method is the same if I used the auto increament column and without.
The code that I have wrote so far is :
'AUTOINCREMENT
Dim n As Integer
Dim inc As Integer
Dim numbers() As Integer
Dim StartFrom As Integer
Dim EndAt As Integer
Dim MaxRows As Integer
MaxRows = ds2.Tables("CustDetail").Rows.Count
[Code] .....
can i make an auto-number with out using database?
View 3 Repliesmake autonumber ID for my database. [URL] I followed the instruction there to solve the problem. I came up with this code.
Try
Dim maxid As Integer
strsql = "select StudID from tblStudent"
[code].....
I thought I already made it right because I was able to insert the first record with the right autonumber for ID which is 2012-00001 until I tried to insert the second record. It says that (Conversion from string "2012-00001" to type 'Integer' is not valid) and the highlighted part is (maxid = cmd.ExecuteScalar).
I want search my database by entering Id number in the text box.
View 3 Replies
