I'm working on this project and i need access to passages of the bible (king james version and or others). i googled and i only come up with programmers bible etc, does any one know something i can pass the book, chapter and verse(s) and get the corresponding text either working locally (which i prefer) or over the net.
View 4 RepliesIs there free open source code project for bible study available?
View 2 RepliesI have a copy of the Bible in txt format which I need to have altered. I wish to put the book name, the chapter number and a colon at the beginning of each verse, just before the verse number. The book name and chapter number can be obtained from the beginning of each chapter and each verse within each chapter is already numbered and on a separate line in the file.
Current text
[code...]
I have a copy of the Bible in txt format which I need to have altered. I wish to put the book name, the chapter number and a colon at the beginning of each verse, just before the verse number. The book name and chapter number can be obtained from the beginning of each chapter and each verse within each chapter is already numbered and on a separate line in the file.
View 3 RepliesLet's say I roll out version 1 of this project for many users. As time goes by I update the code, change the Access db strucutre here and there, and would like to roll out version 2.What is the best way to do this?Is there an easy way to get the differences between version 1 and version 2 of an access db?
View 6 RepliesI am trying to access appSettings using the following syntax and I have used it before in my many website projects but not in a class library project. In this class library project I cannot even access the AppSettings Keys. Is there any way I could access the AppSettings Key from my class? Is the class library project's app.config or project structure behave in a different way?
[Code]...
I have already added Project Reference to System.Configuration and imported in my class. When I run my code it says, "Object not set to an instance of any object".
I'm developing application that is plugable. The plugins are loaded via Assembly.LoadFrom(). In my solution I have 4 projects. A WPF, 2 DLL and another DLL that is a plugin for the app. The plugin project references one of the other DLLs. When I build the Solution and run I was getting an error trying to use the plugin dll because it was expecting an older version of the referenced project. I had to clean and rebuild the plugin project to get it to run correctly.
[Code]...
I have 2003 xls file which is saved on a web share point. File combines vbs functionalities, of which one is uploading data to this file (from another file on the same share point) by clicking command button.When I open file from my location it all functionalities are working without problems. My customer is running it from his location, he is also using Excel 2003, the moment he wants to upload the data he gets the bug.
Message: Method "Worksheets" of object "_Global" failed
I checked and it seems that in the references he has 10.0 object library and I have 11.0 What i can do to unify the coding so it is indifferent from Object Library version?I have read about late va early binding, I guess i'm using late binding I also check that i can adjust late binding buy standard codes.
Dim oExcel As Object
Dim oWorkbook As Object
Dim oWorksheet As Object
[code]....
I have a project done in VS2005 some years ago, how can I tell what what version of .NET I'm using?
View 4 RepliesI am having a problem running an Excel/VBA program that has been working till this morning. The error I got when I ran a macro I wrote is: Compile error: Cannot find project or libraryWhen I check the references in VBA editor, I find the list of references to be different than when I ran it on another machine. I have some xla libraries on a server that I've linked to the application, and the libraries are being shared among my colleagues. I tried relinking the libraries but that didn't work either. Sometimes, I get another message saying the library is being used by another application.
View 10 Replies[code]....
View 2 Repliesi develop a project in visual basic 2010 can there is any way to limit this project for trial version
View 2 RepliesHow they relate and differ from each? What are the best practices for version control? Is there a primer about publish online? Or a good book?
And is it possible to make ClickOnce and a msi in one solution of VS 2008? If so, is there any conflict or pitfall?
BTW I am using VB if that makes any difference.
In Visual basic 6 I often use Flexgrid component, I see that in VB.NET these components are not available. Component should I use instead of Flexgrid. What do I need to call Flexgrid componet (VB6 Version) into the project. NET from COM.
View 4 RepliesI have a Class Library project with a appSettings.config file included into the project. The file is not embedded. So I have a ClassLibrary.dll with a appSettings.config beside in the bin.I have another project which is a Web Service. It has a reference on ClassLibrary.dll with a Copy Local=true. When I build the Web Service, the ClassLibrary.dll is brought into the bin of the Web Service. However, the .config doesn't follow.Do I need to do some postbuild event to copy the .config file or there is another setting I can set?
View 3 RepliesDoes anyone able to advise on abovementioned error? Under Private Sub UserForm_
[Code]...
I hear COM here and there and I want to know is COM and a COM dll the same thing, and most important: when I create a Class library project is that a COM component?
View 3 RepliesI am using VB.NET 2008 Express Edition and INNO Setup. When I create a setup and run it, the resulting install is an older version of my project from, I think, 2 or 3 days ago. If I go back to my project in the developer window and run the project, it is clearly a newer version than the install. Since this installed version that comes up was done I have added a form and made many other changes.Is it because the build didn't exeucte? When you run the project doesn't it execute a build every time?I tried this again from a backup. (The backup is much more recent than the version I'm getting.) And it still does the same thing.Why does the install not match the project? It is not possible to go into the project and add the changes because they are already there.
View 3 Repliesconfirm the forum for this question about Visual Web Developer 2010 Express. I found a VWD Express forum, but it was in Spanish... Lo Siento. My issue is selecting a down-level, 3.5, framework version as I create a new project/website. I have figured out how to CHANGE the target framework version once the website/project is created. I have the 3.5x installed on the system and available. The articles I have seen discussing this issue, refer to a framework version selection drop list in the new project creation dialog/wizard. I do not have that option.
[Code]...
How to pass a variable in one project to dll in vb.net
View 1 RepliesI have a class library called Encrypt.dll that I added to my project (that class encrypts strings..). I have a problem that when I drag the app out of the Release folder, it crashes, giving me this error:Could not load file or assembly 'Encryption_Class, Version=1.0.0.0...' or one of its dependencies. The system cannot find the file specified.What am I doing wrong?I added it from the Reference tab->Add->Encrypt.dll
View 4 RepliesI know you can create a class library in C#.NET and then use that dll in a vb.net project and everything is just peachy. But can you use C++.NET and VB.NET/C#.NET in that manner?
View 2 RepliesI've decided to go with a Windows Installer (Setup Project) in VS Prof, rather than ClickOnce,I've added this project to my main project, and have right clicked and selected 'View -> Launch Conditions', it requires the .netframework 3.5.21022...
But I've created the installer project for .NET 2.0 framework, is this going to stop someone from installing the project without .NET framework 3/3.5?EDIT: I've found under the properties of that installer project, that .NET framework 3.5 and Windows Installer 3.1 was selected as a prerequisite, unchecked those, and checked .NET Framework 2.0, however the version under the launch condition .NET Framework is still 3.5, it should be 2.0
I was wondering is it possible to put forms into a class library project and if so could I use those forms as an mdi child from my main forms app?A bit behind what I am trying to do:I am creating a game which is essentially going to have its own 'operating system' As the user progresses in the game they can 'install' new software into their operating system.I have my 'Desktop' that is an MDI Parent and what I want the users to be able to do it when they have purchased a new bit of software (also in game) the game will connect to my central server download a dll and place it in a directory, that is essentially installing the new bit of software and the game will then pick up that dll and add a new button the Programs list and when the user clicks on that software in the Programs list it will launch the form in the Class Library as an MDI Child of the 'desktop
View 2 RepliesI've created a class library and it's shared by several projects I'm working on.
I added a reference to the DLL - but it appears to have copied it locally - and that's causing problems when I modify the class library. Seems I have to drop the reference and re-add it.
I'm seeing info on the web about adding a PROJECT REFERENCE but can't seem to get that to work.
What is the best method of sharing a class library with several other projects.
Actually - should all my projects be in one SOLUTION? Is that preferred.
It will be 5 projects all working with the same class library...
In my earlier project I was able to change the connection string during the app settings loaded event and it was successfully. When I try to do the same for a code library project, I am not getting the system.configuration.connectionstringsettings to work. Could you please tell if there is a work around for this, or else it is always better to write the sql code instead of depending on the adapters etc.
Additional information: Clients App is WPF with Vb. Database is SQL Server 2008 Code Lib would only be on server, slq connectiona and data retrieving and saving actions are stored in classes in code lib only. Code Lib would be used with WCF, wcf is used to share the classes only and classes have the data. WCF is hosted as a windows service on server used by NET.TCP
I'm working on a windows form project where the first form displays a menu list made up of custom textbox controls. When the user navigates to a textbox and presses enter the underlying code runs another form and hides the menu form. The form to run and the navigations sequence is controlled by properties I added to the custom textbox. I have done the same with a custom button. Both custom control inherit from their respective Windows.forms controls.
View 10 RepliesI am a student of PGDCA. making a project of LIBRARY MANAGEMENT SYSTEM IN VB.NET 2005 VERSION.
View 4 RepliesI've been passed a solution that has a vb.Net 2.0 project that references to a .Net 3.5 library. The library compiles with out problem but the vb project does not. It complains of missing objects which are in the library which are correctly added in the imports. Also I see a yellow yield sign next to the reference library also when I add the reference it complains of the framework version difference. Any help is apritiated. Also I'm using VS10. Imported the projects with no errors. A colleague has this working on VS9.
View 1 RepliesI am new to this forum and also to vb.net (am an ex vb6 programmer)..I installed visual studio 2010 premium edition and it works with my own projects BUT trying to open the microsoft Lab5 solution file I get this error:
"/file cannot be opened because its project type (.csproj) is not supported by this version of the application"