In my form I have Gross Earnings Calculated. Then that goes to a label. I then click a button to Clear Current Employee. Then I can input another employees info to get that employees Gross Earnings. Well when I click View Summary I want to display a Total Gross Earnings. The Total Gross Earnings should be a Total of all Employees Gross Earnings.
View 4 RepliesThe pay rates for the project are:
a. Level 1 - $10.00
b. Level 2 - $12.00
c. Level 3 - $14.00
d. Level 4 - $16.00
e. Benefit Deduction Rate - 0.10
f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal
places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
I need to change it so that this contains a loop to calculate the earnings.
vb.net
Private Sub btnCompute_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCompute.Click
'Compute total earnings at retirement.
'get 5% raise per year, retire at age 65.
Dim name As String, age As Integer, salary As Double
[Code] .....
This should calculate and display the total amount due. There are 3 radio buttons, A, B, C. Nonprofit should get a 20% discount from final charges.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
Private Sub RadioButton1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles radA.CheckedChanged
[Code] .....
my question is regarding a calculation and control display that I am doing.
The application is a project tracker, and I am trying to calculate the total spend of the project and display it on either the first tab if it is an open project or the second tab if it is a completed project. For some reason, it is showing 0 for all but one of the projects. If anyones eyes can see the problem I would be really greatful. The code is below
[code]...
I have this code that is supposed to calculate the gross pay based on hours and rate, the program debugs without a problem but when I click the calculate button it gives me and answer of "0.00".
Public Class frmMain
Private Sub btnCalc_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnCalc.Click
' calculates and displays a gross pay amount
Dim dblHoursWkd As Double
[Code] .....
We need to calculate salary based on monthly gross. Here we are having problem with ESI salary header Consider monthly gross is 12000 and headers are
BASIC = (Monthly Gross) * 40%
HRA = (BASIC) * 40%
Conv. = 800
PF = Basic * 12%
[code]....
In Excel using Goal Seek, we can get the solution for this.Is there any way to get in VB.NET?
Create a project that will input an employees sales and calculate the gross pay,deductions, and net pay. Each employee will receive a base pay of 900 plus a sale commission of 6% of sales.After calculating the net pay, calculate the budget amount for each category based on the percentages given in the tables below.
Pay
Base Pay
�900.00
Commission
[code]....
Your Form should use text boxes to input the employee name and the euro amount of the sales and also use text boxes to display the results of the calculations. Provide buttons for Calculate, Clear, and Exit. Display a message to the user for any bad input data.Hints - You need to declare module-level constants, declare variables, carry out calculations and use try/catch to handle any exceptions that may occur.
This is my project for class and this is what i have so far but my teacher gave me no credit. What am i doing wrong? i tried rearranging it but no success.
A fast-food vendor sells pizza slices at $1.25 each, fries at $1.00, and soft drinks at $0.75. Write a program to computer a customers bill. The program should use 4 subprocedures that do the following:
1. read in the amount of each item ordered
2. calculate the total cost
3. display an itemized bill
4. read in the users full name from a textbox, and display a sentence, addressing the user by first name only and in upper case characters, informing the user of their bill
Here is an example itemized bill:
Item Quantity Price
Pizza slices 3 $1.25
Fries 4 $1
Soft drinks 5 $0.75
Total $11.50
Example sentence for point 4: if the user name was entered as John Smith, you would display the sentence JOHN, your bill is $11.50.
MY
Public Class Form1
Sub pizza(ByVal pizzap As Double, ByVal pizzanum As Double)
lstoutput.Items.Add("Pizza Slices" & pizzap & "and" & pizzanum & "is" & (pizzap * pizzanum) & ".")
[CODE]....
This is the Project that i have to make. Create a project that will input an employees sales and calculate the gross pay, deductions, and net pay. Each employee will receive a base pay of $900 plus a sale commission of 6% of sales.
After calculating the net pay, calculate the budget amount for each category based on the percentages given in the tables below:
Your Form should use text boxes to input the employees name and the amount of the sales and also use text boxes to display the results of the calculations. Provide buttons for Calculate, Clear, and Exit. Display a message to the user for any bad input data. Now i want to know for constants its going to be : commission sale, deductions and everything in Budget? I am also guessing that for the gross pay its going to be the" Gross pay = base pay * Commission" ?
I am using visual basic 2008 amd creatomg a datagrodview format like below [code] Now I wnat to get total balance in total column after less discount in percentage with ENTER EVENT proceedure and get the whole total column balance in a textbox i.e Net BalanceTextBox. Please tell me how to calculate discount in percent % and get total in total column and also tell me how to move cursor in next cell instead of bottom row in datagridview.
View 2 RepliesI have many time result in my hand... like
10.10.23 (hours,minute,seconds)
01.14.15
How can i calculate total time?
I have a sql SELECT statement in vb.net. I have this line of code to calculate a specific percentage of the Net Total:ROUND(Invoices.NetT*'" + txtOnGoing.Text + "'/100,2) As Commission 'txtOnGoing is a text box which pre populates a certain number e.g '10'... this means 10% of the NetT column..The above code works fine, now I want to add the "Commission" Column and display the Total in a text box. Does anyone know how to do this? I know I can use the SUM operator but because the Commission column isnt a column that actually exists in the table I dont know how I could do this.
View 3 RepliesI'm having some trouble firstly trying to calculate the total of a column in the database connected to my vb.net project. Then I want to divide that total by the number of items in a listbox. This is my code so far:
Private Sub btnavresult_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnavresult.Click
Dim sqlx As OleDbCommand = New OleDbCommand
[Code]......
I get an error saying "No value given for one or more required parameters." when I try to run my program on this line "Dim rdr As OleDbDataReader = sqlx.ExecuteReader()"
I have two textboxs are formated to decimal type. i want create thirth textbox and get total of above two textboxs. how can i do that.
[Code]...
How to get the total sum of my fields that are not duplicated? The highlighted are examples of my duplicated fields (both lec and lab) but they don't have the same time.
View 1 RepliesThis is the code that I have so far, the program works, etc.. How to delete the "Calculate Total Due" button and write the code so that the total due changes when any of the three options is changed/selected.
Option Explicit On
Option Strict On
Option Infer Off
Public Class MainForm
Private Function CalcResidentialTotalDue(ByVal premiumChannels As Integer) As Decimal
[Code] .....
The program is for calculating an amount of fruit. I have a label saying the name of the fruit, a textbox to enter a value of 0-99 and another textbox with ReadOnly which will show the price.
A little picture here:[URL]
As you can see, the Fruit1 Etc... Is only the fruit name.
The Text box wich indicate 1-99 means the number of fruit.
The Textbox with Cash on it, means the total price.
The Calculate button, when I will push it, all the total price from all the fruit will be added together to form a total price which will be indicated in the total price textbox under the Calculate button.
When I will enter the number of fruit, if I enter 99, it give me a price.
When I will enter 60, I want that the 60 are multiplied by (let say) 0,10$
I just like to know how I can do this... Its really bothering e and I don't want to calculate all the things and make 99 line for 1 fruit cause it will be long.
The code I was using was:
Private Sub TextBox1_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.TextChanged
If TextBox1.Text = "99" Then
TextBox2.text = "10.00$"
Elseif TextBox1.Text = "98" Then
TextBox2.Text = "9,90$"
EndIf
End Sub
Until the the number of the fruit in the code reach 0. So its very long.
I have successfully written this interest calculation, although it is based on the ppmt function and adding up the interest from each payment. This is quite a long looping process.. And it is not accurate because of the rounding of each payment. I was wondering if someone knows if there is a formula I can use, or if the pmt function is capable of this? (e.g. Mortgage payment - total interest payable over 30 years at 5% ( principle and interest repayments))?
View 1 RepliesI have a class assignment where i have to calculate the total cost of a parking garage from hours but i have to do it with a method function. So this might be a stupid question but can you read the user input values from a textbox in the function itself or do they have to be read in and recalled from the Private Sub Button1_Click section?
View 8 Repliestell me what is wrong with this calculation. I am fairly new to vb.net so i'm not particularly clued up! I am using it to calculate the total fare of taxi journeys.
[Code]...
I want to calculate the total for bill amounts in an arraylist. I have already used this code:
[Code]...
i want to calculate total salary according to attending days.
View 5 RepliesI am creating a report in vb.net using crystal reports and need help on finding sum of dailyworkhrs in my crystal reprot. I have a feld which calculates dailyworkhrs and now i would like to find the total of it. For example:
07:30:12
08:30:10
OUTPUT Should be
16:00:22
When I enter the quantity variable the script will not calculate. What am I missing ?
Public Class frmMovie
Private Property intQuantity As Integer
Private Sub txtName_TextChanged(ByVal sender As System.Object, ByVal e As [codee]....
Now my programm is finish and have full function, but.... it is sooo slowly with dataset/datatable/query-creater. Before I used DataContext like:
PUBLIC CLASS Main
Private db As New KontoauszugSQLDataContext
.
.
.
Privat Sub LaufendeSumme ()
[Code].....
This works much faster. May be something wrong with System or is this normal? I think it must be quicker to get a queryresult with dataset/datatable/query-creater then with the DataContext version and its update.
i want to calculate the total sum of each datarow in a DataRepeater.[code]
View 4 RepliesI am having an issue with trying to calculate a running total from items in a listbox. I am getting an InvalidCastException with the btnCalc_Click event. I think I understand why I am getting this exception, just not sure exactly how I fix it.
I need to have the lblTotalCost display the Grand Total of all the workshop totals. Ca anyone point me in the right direction here, I have been struggling with this part for about 2 weeks.[code...]
For my programm I was told to do a programm to calculate the total and average rainfall. I have done so, but now I am supposed to use two function procedures to calculate the total and average rainfall. I can not seem to figure it out and it is very frustrating.
[Code]...
I'm trying to calculate the total cost for gas for a Chevy and a Buick on a form. The total miles is 21 for city and 33 for freeway. I'm also putting in the mpg for each, for city and freeway. How would I set up the labels to display the right amount? Do I use If Then statements?
View 9 Replies