This should calculate and display the total amount due. There are 3 radio buttons, A, B, C. Nonprofit should get a 20% discount from final charges.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
Private Sub RadioButton1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles radA.CheckedChanged
[Code] .....
i have a datagridview binded with the datatable via its datasource property....now i want to add the Amount column of the dgv and display the total amount in the textbox,if the amount is greater than a certain value then i want the cell to coloured red so i did this code and it worked great:
Dim i, j As Integer
For i = 0 To DataGridView1.RowCount - 1
j += Me.DataGridView1.Rows(i).Cells("Amount").Value
Next
[code]....
but my problem is that i want the red colour of the cell to blinkafter every 2 seconds....how to do this?i need to handle the timer tick event for this but i am not able to do this.....
The pay rates for the project are:
a. Level 1 - $10.00
b. Level 2 - $12.00
c. Level 3 - $14.00
d. Level 4 - $16.00
e. Benefit Deduction Rate - 0.10
f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal
places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
In my form I have Gross Earnings Calculated. Then that goes to a label. I then click a button to Clear Current Employee. Then I can input another employees info to get that employees Gross Earnings. Well when I click View Summary I want to display a Total Gross Earnings. The Total Gross Earnings should be a Total of all Employees Gross Earnings.
View 4 Repliesmy question is regarding a calculation and control display that I am doing.
The application is a project tracker, and I am trying to calculate the total spend of the project and display it on either the first tab if it is an open project or the second tab if it is a completed project. For some reason, it is showing 0 for all but one of the projects. If anyones eyes can see the problem I would be really greatful. The code is below
[code]...
This is my project for class and this is what i have so far but my teacher gave me no credit. What am i doing wrong? i tried rearranging it but no success.
A fast-food vendor sells pizza slices at $1.25 each, fries at $1.00, and soft drinks at $0.75. Write a program to computer a customers bill. The program should use 4 subprocedures that do the following:
1. read in the amount of each item ordered
2. calculate the total cost
3. display an itemized bill
4. read in the users full name from a textbox, and display a sentence, addressing the user by first name only and in upper case characters, informing the user of their bill
Here is an example itemized bill:
Item Quantity Price
Pizza slices 3 $1.25
Fries 4 $1
Soft drinks 5 $0.75
Total $11.50
Example sentence for point 4: if the user name was entered as John Smith, you would display the sentence JOHN, your bill is $11.50.
MY
Public Class Form1
Sub pizza(ByVal pizzap As Double, ByVal pizzanum As Double)
lstoutput.Items.Add("Pizza Slices" & pizzap & "and" & pizzanum & "is" & (pizzap * pizzanum) & ".")
[CODE]....
I need my program to output and input a customer ID and sales amount multiple times. I need it to display both outputs, customer ID and sales amount, on mulltiple lines. It also will need to accumulate the sales amount and then display the total sales. it should look something like that.[code...]
I think that I was supposed to use a messagebox but wrote the program a different way. the form.vb was already locked, but I added two text boxs. Not sure if I did this right because I need to enter multiple sales for one customer ID.[code...]
I am using visual basic 2008 amd creatomg a datagrodview format like below [code] Now I wnat to get total balance in total column after less discount in percentage with ENTER EVENT proceedure and get the whole total column balance in a textbox i.e Net BalanceTextBox. Please tell me how to calculate discount in percent % and get total in total column and also tell me how to move cursor in next cell instead of bottom row in datagridview.
View 2 Replieshow to calculate the amount needed to save up to a certain amount.
Private Sub btnCalc_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnCalc.Click
Dim dblSavings As Double
Dim dblFuture As Double
[code]....
how to accumulate the total amount in sql table. I have created a table below but it does not calculate accurately. By mean it just total up current top up amount with the 1st value of grand total. How do i total up to get the accurate figure.
ID Amount GrandTotal
99 1000 1000
99 500 1500
99 300 1300
99 200 1200
These person is hired by her employee which it agree that the salary would be one penny the first day, two pennies the second day and four pennies the third day and continuing to double each day. I have to use a combo box to select the days that the employee will be working and calculate the total amount of pay that will received. Its not calculating right?
Dim intDay As Integer = 0
Dim intCount As Integer = 1
Dim decPay As Decimal = 0
Dim intNumDays As Integer
Dim dblTotal As Double = 0
[Code] .....
have two forms, Open PO form and Bill Form. The open form is the one i use in retrieving data to the datagridview of 2nd form. when the info (ex. amount) of each item is retrieve to the bill form datagridview, i need the amount of each items to be automatically total appearing on a textbox. to get or to compute the total of amounts
Dim Key As String = 0
With gridPOItems
For Each xRow As DataGridViewRow In gridPOItems.Rows
[code]......
i am working on a blackjack program, the dealers button works fine and all but when i press the button to hit me it says "Object reference not set to an instance of an object.", and i had it work before, but when it does work the aces either count as 11 or 0, and how can i get the value of the total amount of cards to reset.
View 24 Repliesi have a problem about adding up the sum of table in my listview, [code]after i input a value in the textbox1 it will give me the total amount in the listview items. the problem is i cannot sum up the table amount which i will be needing to proceed to another transactions.
View 1 RepliesI want to get the total (column) amount using Listview w/o database VB.NET
lstitems
Item Name | Unit Price | Quantity | Amount
---------------------------------------------
Sample1 | 100.00 | 1 | 100.00
Sample2 | 100.00 | 1 | 200.00
Sample3 | 100.00 | 1 | 200.00
Label or Textbox ----> Total 500.00
I am trying to update my table reservation I am just trying to update only on column which is total amount but it is not updating.
Here is my code.
Dim a As Integer
a = MessageBox.Show("Are you sure you want to exit????", "ALI ENTERPRISES", MessageBoxButtons.YesNo, MessageBoxIcon.Information)
If a = vbYes Then
Me.Close()
[Code] .....
I'm trying to calculate the amount of CPU usage my application uses.
My code.
Try
Dim CPU As Integer = CDec(PerformanceCounter2.NextValue.ToString)
Label44.Text = CPU & "%"
[Code]...
The problem is that sometimes it says it uses more 115% hmmm.... That's when i was for sure that its lying to me.
this what i have so far
dim totalprice as string=""
if klant.lblprice.text >0 then
totalprice =klant.lblprice.text.count
totalbesteding.lblprice.text=totalprice
end if
does anybody has an idea how i can calculate the amount of an object so that i can get a total amount
I have many time result in my hand... like
10.10.23 (hours,minute,seconds)
01.14.15
How can i calculate total time?
I have a sql SELECT statement in vb.net. I have this line of code to calculate a specific percentage of the Net Total:ROUND(Invoices.NetT*'" + txtOnGoing.Text + "'/100,2) As Commission 'txtOnGoing is a text box which pre populates a certain number e.g '10'... this means 10% of the NetT column..The above code works fine, now I want to add the "Commission" Column and display the Total in a text box. Does anyone know how to do this? I know I can use the SUM operator but because the Commission column isnt a column that actually exists in the table I dont know how I could do this.
View 3 RepliesI'm having some trouble firstly trying to calculate the total of a column in the database connected to my vb.net project. Then I want to divide that total by the number of items in a listbox. This is my code so far:
Private Sub btnavresult_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnavresult.Click
Dim sqlx As OleDbCommand = New OleDbCommand
[Code]......
I get an error saying "No value given for one or more required parameters." when I try to run my program on this line "Dim rdr As OleDbDataReader = sqlx.ExecuteReader()"
I have two textboxs are formated to decimal type. i want create thirth textbox and get total of above two textboxs. how can i do that.
[Code]...
How to get the total sum of my fields that are not duplicated? The highlighted are examples of my duplicated fields (both lec and lab) but they don't have the same time.
View 1 RepliesThis is the code that I have so far, the program works, etc.. How to delete the "Calculate Total Due" button and write the code so that the total due changes when any of the three options is changed/selected.
Option Explicit On
Option Strict On
Option Infer Off
Public Class MainForm
Private Function CalcResidentialTotalDue(ByVal premiumChannels As Integer) As Decimal
[Code] .....
The program is for calculating an amount of fruit. I have a label saying the name of the fruit, a textbox to enter a value of 0-99 and another textbox with ReadOnly which will show the price.
A little picture here:[URL]
As you can see, the Fruit1 Etc... Is only the fruit name.
The Text box wich indicate 1-99 means the number of fruit.
The Textbox with Cash on it, means the total price.
The Calculate button, when I will push it, all the total price from all the fruit will be added together to form a total price which will be indicated in the total price textbox under the Calculate button.
When I will enter the number of fruit, if I enter 99, it give me a price.
When I will enter 60, I want that the 60 are multiplied by (let say) 0,10$
I just like to know how I can do this... Its really bothering e and I don't want to calculate all the things and make 99 line for 1 fruit cause it will be long.
The code I was using was:
Private Sub TextBox1_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.TextChanged
If TextBox1.Text = "99" Then
TextBox2.text = "10.00$"
Elseif TextBox1.Text = "98" Then
TextBox2.Text = "9,90$"
EndIf
End Sub
Until the the number of the fruit in the code reach 0. So its very long.
I have successfully written this interest calculation, although it is based on the ppmt function and adding up the interest from each payment. This is quite a long looping process.. And it is not accurate because of the rounding of each payment. I was wondering if someone knows if there is a formula I can use, or if the pmt function is capable of this? (e.g. Mortgage payment - total interest payable over 30 years at 5% ( principle and interest repayments))?
View 1 RepliesI have a class assignment where i have to calculate the total cost of a parking garage from hours but i have to do it with a method function. So this might be a stupid question but can you read the user input values from a textbox in the function itself or do they have to be read in and recalled from the Private Sub Button1_Click section?
View 8 Repliestell me what is wrong with this calculation. I am fairly new to vb.net so i'm not particularly clued up! I am using it to calculate the total fare of taxi journeys.
[Code]...
I want to calculate the total for bill amounts in an arraylist. I have already used this code:
[Code]...
i want to calculate total salary according to attending days.
View 5 Replies