I am trying to update my table reservation I am just trying to update only on column which is total amount but it is not updating.
Here is my code.
Dim a As Integer
a = MessageBox.Show("Are you sure you want to exit????", "ALI ENTERPRISES", MessageBoxButtons.YesNo, MessageBoxIcon.Information)
If a = vbYes Then
Me.Close()
[Code] .....
i have a datagridview binded with the datatable via its datasource property....now i want to add the Amount column of the dgv and display the total amount in the textbox,if the amount is greater than a certain value then i want the cell to coloured red so i did this code and it worked great:
Dim i, j As Integer
For i = 0 To DataGridView1.RowCount - 1
j += Me.DataGridView1.Rows(i).Cells("Amount").Value
Next
[code]....
but my problem is that i want the red colour of the cell to blinkafter every 2 seconds....how to do this?i need to handle the timer tick event for this but i am not able to do this.....
i have a problem about adding up the sum of table in my listview, [code]after i input a value in the textbox1 it will give me the total amount in the listview items. the problem is i cannot sum up the table amount which i will be needing to proceed to another transactions.
View 1 RepliesI want to get the total (column) amount using Listview w/o database VB.NET
lstitems
Item Name | Unit Price | Quantity | Amount
---------------------------------------------
Sample1 | 100.00 | 1 | 100.00
Sample2 | 100.00 | 1 | 200.00
Sample3 | 100.00 | 1 | 200.00
Label or Textbox ----> Total 500.00
how to accumulate the total amount in sql table. I have created a table below but it does not calculate accurately. By mean it just total up current top up amount with the 1st value of grand total. How do i total up to get the accurate figure.
ID Amount GrandTotal
99 1000 1000
99 500 1500
99 300 1300
99 200 1200
I am using visual basic 2008 amd creatomg a datagrodview format like below [code] Now I wnat to get total balance in total column after less discount in percentage with ENTER EVENT proceedure and get the whole total column balance in a textbox i.e Net BalanceTextBox. Please tell me how to calculate discount in percent % and get total in total column and also tell me how to move cursor in next cell instead of bottom row in datagridview.
View 2 RepliesI have 3 columns in a unbound datagridview, "length" "height" and "Total". Total = length x width and the final total in TextBox outside of the Grid. I found question simalar in this forum and tried the code but i am getting errors.The following is the code i am using
Public
Class Form1
Dim UnboundColumn[code]...
These person is hired by her employee which it agree that the salary would be one penny the first day, two pennies the second day and four pennies the third day and continuing to double each day. I have to use a combo box to select the days that the employee will be working and calculate the total amount of pay that will received. Its not calculating right?
Dim intDay As Integer = 0
Dim intCount As Integer = 1
Dim decPay As Decimal = 0
Dim intNumDays As Integer
Dim dblTotal As Double = 0
[Code] .....
have two forms, Open PO form and Bill Form. The open form is the one i use in retrieving data to the datagridview of 2nd form. when the info (ex. amount) of each item is retrieve to the bill form datagridview, i need the amount of each items to be automatically total appearing on a textbox. to get or to compute the total of amounts
Dim Key As String = 0
With gridPOItems
For Each xRow As DataGridViewRow In gridPOItems.Rows
[code]......
i am working on a blackjack program, the dealers button works fine and all but when i press the button to hit me it says "Object reference not set to an instance of an object.", and i had it work before, but when it does work the aces either count as 11 or 0, and how can i get the value of the total amount of cards to reset.
View 24 RepliesThis should calculate and display the total amount due. There are 3 radio buttons, A, B, C. Nonprofit should get a 20% discount from final charges.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
Private Sub RadioButton1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles radA.CheckedChanged
[Code] .....
Attempting to run an SQL statement to UPDATE a column in a table with new data. The column being updated is defined as varchar(40) and the new data is 41 bytes (varchar(41)). I get a generic 'data will be truncated' error message, but no detail on which column caused the problem. I've attached a sample VB program to illustrate the issue. In this scenario, Company is defined as varchar(40).
My question: Can I get a more detailed error message? i.e. can I get an error message that tells me the row and column that the truncation occurs in? Often times, I may be updating hundreds or thousands of rows and only one value in one column from the source file is too large for a database cell. As a related question, does each OLEDB provider create its own error messages. i.e. will the MS SQL Server OLEDB provider potentially give different text in the error message than say the MS Jet OLEDB provider?
Imports System.Data.OleDb
Module Module1
Dim cn As OleDbConnection
[Code]......
I'm maintaining a Table in SQLserver, the Table contains Transaction of Cash In (Debit) and Cash Out (Credit) as follows:
Table Name : "BankLedger"
DATE...DETAILS........DEBIT...CREDIT...BALANCE
1/1/11.Opening Balance.................5000
1/1/11.Rent payment...........2500.....
2/1/11.Mobile Bill.............500.....
3/1/11.Monthly Share...5000............
6/1/11.Emp Salary.............3000.....
Now my requirement is how to update the Balance column respectively same as "Running Total" method???
DATE....DETAILS........DEBIT...CREDIT..BALANCE
1/1/11..Opening Balance................5000
1/1/11..Rent payment...........2500....2500
2/1/11..Mobile Bill.............500....2000
3/1/11..Monthly Share...5000...........7000
6/1/11..Emp Salary.............3000....4000
My application in Visual Basic 2010 and Database SQLserver 2008.
Below code is supposed to update a table in oracle with rows imported. But it seems to update all columns in the table with only the first column which is imported from the CSV file. I figure its the "ReadFields" property which needs to manipulated/changed.
[Code]...
I have a gridview loaded with data from my database and a gridview swapping function which after exchanging data between rows with a column call "Priority", I want to save these changes back to my database. Only the "Priority" column value will be change, how do I update only that Column of my dataset table to my SQL database?
[Code]....
As the title says, when I attempt to update a row in a table in a database, I recieve an InvalidCastException. I am unsure why, since the variables I am using should be, and indeed, when I check them at runtime, are filled with the correct data.
I am trying to update using the method wherein the row that is being updated is identified with all the variables already stored. Interestingly, Intellisense is telling me that EntryID, the primary key, is only necessary in it's original form, and that the variables that I am attempting to update have question marks after their type.
I am looking for the best way to edit and update the value of a database column that is defined as data type TEXT. You can't use a replace command in SQL and if I read in the value, update the data and update the record, the changes are not applied.
View 3 RepliesI want to Update Column of a Table where ColumnName will be DropDown.SelectedValue.Example: A set of RECORDS will be displayed from a Customer Table where CUstNo ='1234' and City= 'Chicago' and Grade ='B' Once displayed I want to Update the grade to 'A' of all those customers from the above criteria. In My case I have like 100 Columns, so in where Clause Column Names will be selected from a DaropDown.In My Query, Update Customer SET ColumnName= 'some value' where ColumnName ='ActualValue'So how can I pass the ColumnName which is Dropdown Selected Value. I believe I can't give as Update Customer SET DropDown.SelectedValue = 'some value' where DropDown.SelectedValue ='ActualValue'
View 1 RepliesI have a program and I get time data from a sqldb and display it in a column in a listbox. What are the proper steps for adding the time as I iterate through the data in the column? I figure I will need to do some conversions on the time to be able to add it and display it as a total.
View 9 RepliesI need my program to output and input a customer ID and sales amount multiple times. I need it to display both outputs, customer ID and sales amount, on mulltiple lines. It also will need to accumulate the sales amount and then display the total sales. it should look something like that.[code...]
I think that I was supposed to use a messagebox but wrote the program a different way. the form.vb was already locked, but I added two text boxs. Not sure if I did this right because I need to enter multiple sales for one customer ID.[code...]
Trying to update an oracle 10g table using asp.net and the oracleclient connector Here is the sql syntax:
[Code]...
everything works fine. The column PURPOSE does exist and I am able to INSERT information into the PURPOSE column.
I am creating a roulette wheel using microsoft excel visual basic. I want to create a table with the amount of money you have that goes up or down based on wheter you win/lose. This is what I have so far:
Public Sub spin()
Dim speed As Double
Dim spin As Double
Dim maxspeed As Double
[Code]...
how I would go about getting the item count for a column in my mssql db.
View 3 RepliesI have a sql SELECT statement in vb.net. I have this line of code to calculate a specific percentage of the Net Total:ROUND(Invoices.NetT*'" + txtOnGoing.Text + "'/100,2) As Commission 'txtOnGoing is a text box which pre populates a certain number e.g '10'... this means 10% of the NetT column..The above code works fine, now I want to add the "Commission" Column and display the Total in a text box. Does anyone know how to do this? I know I can use the SUM operator but because the Commission column isnt a column that actually exists in the table I dont know how I could do this.
View 3 RepliesI have a bound datagridview in my code. I want to create a column to the right of each row that displays the sum of the values in the row.I've searched the net dilligently and have found nothing! Summarizing the columns is there, but not a row.
Oct Nov Dec Total
100 100 100 300
150 150 100 400
Etc....
I have a datagridview on a form and what I need to do is loop through the dgv and get a total of how many X's are in each individual column and then display the total in a Label. Here is the form and some information. I know how to get the sum of numbers in a column but not how to do this.
There are 28 columns Column Names are Day1, Day2, Day3 etc (so I know to use a for loop but can't figure it out) The total needs to go in the label at the bottom of each column,again they are Label28, Label29, Label30 right on up to Label56. I will continue working on it
I'm having some trouble firstly trying to calculate the total of a column in the database connected to my vb.net project. Then I want to divide that total by the number of items in a listbox. This is my code so far:
Private Sub btnavresult_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnavresult.Click
Dim sqlx As OleDbCommand = New OleDbCommand
[Code]......
I get an error saying "No value given for one or more required parameters." when I try to run my program on this line "Dim rdr As OleDbDataReader = sqlx.ExecuteReader()"
I learned about this query 2 days ago:-
SELECT SUM(DTotal) AS Monthly FROM bdailytotal
but how I'm going to view the total value of the summation? I had been searching for this but most of the answers I get is for PHP. Can someone show me how to assign that total value to a variable in VB.NET?
Or teach me how to assign that total value to another table.
I have put datagridview on form. I have add one column and 7 rows. Beginning four row contain value "PASS" respectively and last three rows contain value "Fail" respectively. I have to count total fail values in a column in CellEndEdit Event.
View 2 RepliesProtected Sub invokePagination(ByVal table As DataTable)
'CallPagination() As PagingControlDTO
If table.Rows.Count > 0 Then
Me.DataGridPaging1.Visible = True
[code].....
The code which is underlined is to be replaced.Instead of this I want to use column name to get the total count , since it contain the total count.Column Name is "TOTALROWCOUNT"