Create A Project That Will Input An Employees Sales And Calculate The Gross Pay?
Oct 24, 2011
Create a project that will input an employees sales and calculate the gross pay,deductions, and net pay. Each employee will receive a base pay of 900 plus a sale commission of 6% of sales.After calculating the net pay, calculate the budget amount for each category based on the percentages given in the tables below.
Pay
Base Pay
�900.00
Commission
[code]....
Your Form should use text boxes to input the employee name and the euro amount of the sales and also use text boxes to display the results of the calculations. Provide buttons for Calculate, Clear, and Exit. Display a message to the user for any bad input data.Hints - You need to declare module-level constants, declare variables, carry out calculations and use try/catch to handle any exceptions that may occur.
This is the Project that i have to make. Create a project that will input an employees sales and calculate the gross pay, deductions, and net pay. Each employee will receive a base pay of $900 plus a sale commission of 6% of sales.
After calculating the net pay, calculate the budget amount for each category based on the percentages given in the tables below:
Your Form should use text boxes to input the employees name and the amount of the sales and also use text boxes to display the results of the calculations. Provide buttons for Calculate, Clear, and Exit. Display a message to the user for any bad input data. Now i want to know for constants its going to be : commission sale, deductions and everything in Budget? I am also guessing that for the gross pay its going to be the" Gross pay = base pay * Commission" ?
I am trying to get a function so when i press the calculate button it somes up with sales totals and sales commissions. this is just a simple project i just cant find the answer.
In my form I have Gross Earnings Calculated. Then that goes to a label. I then click a button to Clear Current Employee. Then I can input another employees info to get that employees Gross Earnings. Well when I click View Summary I want to display a Total Gross Earnings. The Total Gross Earnings should be a Total of all Employees Gross Earnings.
I have this code that is supposed to calculate the gross pay based on hours and rate, the program debugs without a problem but when I click the calculate button it gives me and answer of "0.00".
Public Class frmMain Private Sub btnCalc_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnCalc.Click ' calculates and displays a gross pay amount Dim dblHoursWkd As Double [Code] .....
The project is suppose to total the 8 commissions (in the array) I see the coding but when I try to put in a label at the bottom of the txtReport I get an error now I have deleted the box and am confused as to what my next step should be. Do I create a label box in the txtReport. I am so close to being finished.
The item "objDebugWindowsApplication1.Form1.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter.
My code works correctly if I do not have the DO WHILE statement, however we are suppose to have it loop. Which it will continue to ask for the salesman's name, code, etc. but when the user enters the name "eugene" the program is suppose to calculate and output the total monthly sales and the total commission dollars. What is happening is that when a user enters "eugene" the program is not recognizing it to do what it is suppose to do(calculate and output the total monthly sales and the total commission dollars) I am stuck and need assistance on how to make it recognize eugene. I am also having trouble with trying to figure out how once eugene is entered to tell the program to add the salespersoncommission and monthly sales of each case to get the totals to output to the user. Can you add the cases?
I need my program to output and input a customer ID and sales amount multiple times. I need it to display both outputs, customer ID and sales amount, on mulltiple lines. It also will need to accumulate the sales amount and then display the total sales. it should look something like that.[code...]
I think that I was supposed to use a messagebox but wrote the program a different way. the form.vb was already locked, but I added two text boxs. Not sure if I did this right because I need to enter multiple sales for one customer ID.[code...]
is there any way to populate a listbox with totals data from previous pages? I'm working on a project for a class where the final form needs to have all the totals from the previous 3 pages (each page has one total each), in some capacity (so I do not necessarily need to use a listbox if there is an easier way to do this).One thing about the previous 3 forms, two are set up in radiobuttons and one is set up w/a checkbox format (but I will likely change the radiobuttons over to checkboxes as a later revision).I just can't figure out how to populate the listbox with info from a previous form, I keep thinking load events, but that doesn't take into account which options might be taken from previous forms.once the totals from the previous forms have been added to the final form I will need to add a 7% sales tax. I assume that something such an if then statement will take care of that though.Just wanted to run that everyone here at the forum just in case there is a better way to do that.
I have to create an application that prompts the user to enter today's sales for five stores. The program should then display a simple bar graph comparing each store's sales. Create each bar in the bar graph by displaying a row of asterisks (*) in a list box. Each asterisk in a bar represents $100 in sales. I have to make two different versions of this program. One using a "do while ... loop" and the other using a "for ... next loop". Could someone give me a hint on how to do this. I the "do while ... loop" version and I have had some problems, especially with converting the numbers to asterisks.
Private Sub btnDisplay_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplay.Click 'Clear everything
this is my first vb. and i have assignment and i have been trying for hours but i couldn't do it right I have to create an application that prompts the user to enter today's sales for five stores. Create a loop to prompt for an amount for the first store using an inputbox and do not exit until you have good data. The inputs cannot be negative or greater than 5000, but may contain decimal values. The program should then display a simple bar graph corresponding to the amount of sales using a row of asterisks (*) in a listbox. Each asterisk represents $100 in sales. Display the total of all the stores by looping this process for each store.
I'm looking for a way to calculate an average from a input integer within a loop. When the user enters something like -90, the average will be calculated using the previously input numbers.
I'm trying to convert input and display in a label using a calculate button click.I need to take the input from the textbox add it to data inside a label and display it in a label (output). The data has to be validated for no negative or non numeric data. [code]Nothing is being displayed in the output label and only getting label with error msg???
my question is regarding a calculation and control display that I am doing.
The application is a project tracker, and I am trying to calculate the total spend of the project and display it on either the first tab if it is an open project or the second tab if it is a completed project. For some reason, it is showing 0 for all but one of the projects. If anyones eyes can see the problem I would be really greatful. The code is below
To create a program that asks for input then uses an else statement to create a handling fee balance.
Input: sales record - first name, last name, purchase amount, balance before purchase
Output: report - full name, old balance, purchase amount, handling fee, new balance
Definitions: handling fee is 5% of the old balance if the old balance is less than $1000.00 else it is 2% new balance = old balance + purchase + handling fee
Processing: Ask for and receive sales information Calculate new balance Print output report End the program when a purchase amount of 9999.99 is entered
I have to make a virtual keyboard with my application which needs to input Chinese characters.
I can change the input language to Chinese, but cannot input Chinese coding as normal keyboard does...(I am using SendKeys.Send("A") as if I am pressing the "A" key on the keyboard, but the focus is on my virtual keyboard (another form other than the form of editing).)
any solution which I can get the virtual keyboard and the main task in the same application?
I ma trying to create a program to calculate my math grade. The way my math teacher explained the grading scale was each test is worth 1 point and each quiz is worth .2 points.
So as an example (add both sides up then divide by both sides)
100 =1 80 = 1 15 = .2 18 = .2
213 divide by 2.4 which equals your grade of 88.75
There are more quizs and tests in the semester and I want the numbers to change with the number of quizs and tests entered. The only problem is I am not sure how to code it. I though I would use IF AND statements but I am not sure where to start.
I am having trouble with the pennies calculator. I need to create an application which should calculate the number of dollars, quarters, dimes, nickels and pennies a person will receive when they cash in the pennies at a bank.Eveything seems to be working fine except the nickles...
Option Explicit On Option Strict Off Option Infer Off Public Class frmMain
i'm developing a project on employees. I have added a list box and display the data about my employees in the list box. How am i supposed to do that, do we have to put in codes or need to use that small arrow near the list box.
I have been using C# for 4 years along with SQL server. However, today I have to do small application using VB.Net to search some users based on their departments
This is the first time that I am trying to do something in Active directory (and this is the first time I ever seen the Active directory). I always write database queries and I have no idea how to do query on Active directory How to search the employees based on deparments?
I find it difficult to create my own code. Am creating a program that will be able to calculate the sum of two numbers and display the results on the screen, i manage to create a code of clear and close button but for calculate i cant.
I need to create a software for orthodontists that would allow them to calculate the measurement of the teeth.I need to calculate the path of a curve created by the user over the teeth.I dont know how to calculate a curve is there any idea how to do it?or any other software available for it?i have searched for photoshop and there is no option available.
I have two grids displaying records of employees like name, job no, and position . Now I have to swap their jobs from Emp A to Emp B which is from one grid to other.
i am trying to create a small program that will calculate the miles between to postcodes.The way im doing this is to fill out a webform for each postcode and collect the returned Long/Lat values (i will then calculate the miles from that)
This all works well until my program freezes with no error message. It's after the same number of records as well and I don't know why.[code...]
