All of suddenly I can not see a form in design view. I am getting 57 errors and all of them have this error.... They type 'Windows.My.Resources.Resources' has no property named '....'
My project runs fine. I can compile and do all that good stuff. But I can not see for in design view.
I seem to have reached a limit on the size of the form. I cannot make the form longer and I need to add more fields. Is there a limit on how many fields can be included in a form?
I was loading my project when my computer rebooted suddenly. After it came back up, I went to load my project again and got an error about "an error occured when loading in the design view..this has been disabled" - sorry I did not get the exact message but it was something like this. Then when my project opened up, I now cannot see my form in the design view anymore. It still run's fine, but there is no code displayed and the form itself does not display in IDE anymore. I can see the code for the form only on the form.designer.vb mode.I have continues backup installed, and restored several versions of the class files for the form, but yet still no luck.
i'm on day one with VB05 express Beta 2 after a several-year break from VB6 after having a sudden surge of programming inspiration. i must say i'm quite impressed with a lot of the features, however, i'm really stumped by something that must be so simple that i'm just looking too hard or something.i've been looking for hours at how to return to the graphic design view of a form. i can't find it anywhere. all of the code from when i closed my project is still there but the visual representation of the form itself is nowhere to be found.
I have created one application which have one mdi parent foem and after that i have designed 3 more forms. now from solution wxplorer whenever i click in mdi parent form i doesont show its design pane.. how can i see the design view of mdi parent form.
I often get this problem. I open a form in design mode and the form is not in view and scrollers can't get to it. Sometimes it's cut in half and the other half is outside the window but there's no way to move the form inside the design space to see the form in full. Sounds like a lame problem but I can't find a way to properly open the form
I was working on a project in vs 2005 and decided to see my project's form in microsoft blend, the form did not show and i closed blend and saved no changes. The next time i open my project in visual studio, my form1 design mode shows me some code for the windows form designer. How can i get my form back as i need to add more controls and change the orientation of some others?
I have a windows application with a large form named QueryForm which I can no longer open in the design view. When I debug the project the form displays as normal and when I view all files you get the two files QueryForm.Designer.vb and QueryForm.resx. Is there any way I can re-assosciate this file as a form so I can use the design view again instead of having to recreate the form all over again? I have added a new form which works fine in design view and cannot think of any reason why the form will not work in the design mode
I have a custom UserControl that I am hosting inside a FlowLayoutPanel. Each time that I run the application the control will disappear off the hosting form's design view. I have to close the form's design view and then reopen it each time. The control is not getting removed in any way, just isn't being shown.
Edit, alright this got a bit weirder. Only the first usercontrol that I put into the FlowLayoutPanel disappears. This problem also happens on a project Build and Rebuild.
Is there a shortcut to get to the designview form in a winforms project in visual studio 2010.F7 will take you to code behind class form and shift + F7 will take you to design mode. Is there a shortcut to filename.designer.cs formWhere you have the control definitions, delegates (for click event etc). defined. I go to the form often if I change the name of click event etc.I have to go through solution explorer and click on the file. Is there a shortcut like F7 that opens the designer.cs file?
I have a project which still runs fine without issue however i dont seem to be able to access the design view of Form1. The icon in soultions explorer has also changed from a form to a sinple vb reference. Im unable to right click in solutions explorer and view designer as there is no option there.
I made a very simple web browser with three forms last night, saved the project and came to re-open it this morning only to find that form1 and form2 cannot be edited in anything but code mode now.Very confused. Am using Visual Basic Express 2008 on Windows 7 x64.
I have created a form and dropped a MicrosoftReportViewer onto the form. It appears in the control panel on the bottom of the design view but it will not show up in the form. This is the second form I have done like this. The first one is fine. I can see the report viewer in the form and reports work correctly. For the second form nothing. Something I did notice is that in the first form the ReportViewer1 has a name in properties. In the second form there is no line with the name of the control.
I have just started using VB 2008 Express i couldn't find a forum for this version. Im having trouble working out how to open my form in design view rather than code.
I created primary/start up Form for my VB2005 app (called Admin.vb). Now when I go back to the solution explorer, I can see Admin.vb but it doesn't have the form icon and clicking it doesn't open the form. Instead it opens the code.All of my other forms are fine and have the right icons and open in the [Design] view ...The form obviously still exists as it opens in runtime but I can't seem to open the design view for it.
I am encountering a very mysterious error which I have not encountered before. While trying to use VIEW DESIGN OPTION in VB.NET 2003 Solution Explorer to maintain the existing FORM the error message list below appears.Here is the error message that appear in the TASK BAR panel at the bottom of the Screen Property accessor 'IsMdiContainer' on object 'System.Windows.Forms.Design.FormDocumentDesigner' threw the following exception:'Specified cast is not valid.'
I have created my webpage in asp.net in 1024*768 resolution, my problem was that when i change my monitor resolution then the controls in my webpage will be displayed in unmanaged manner .
How to arrange items in my webpage which support multiple resolution ...
Whatever the resolution of my monitor the controls in my webpage will display as it is as managed in 1024*768 reolution !
When I double click on a form control while in the design view in a Web Application project within Visual Studio 2010, say a 'button' or a 'submit' for example, it inserts a javascript function into my .aspx file. When I do this at work it automatically creates an event handler for the control in the code-behind.How do I change this to that setting?I don't want to type those event handler subroutines every time!
The title pretty much precisely asks the question, but I shall repeat;
When I double click on a form control while in the design view in a Web Application project within Visual Studio 2010, say a 'button' or a 'submit' for example, it inserts a javascript function into my .aspx file. When I do this at work it automatically creates an event handler for the control in the code-behind.How do I change this to that setting? I have used '/resetsettings' already, and other answers to similar questions do not solve my problem. I have reinstalled, gone through every menu I can find (though I may have missed something)I don't want to type those event handler subroutines every time!
I am making a program using Windows Form Application, and I had it set up in the design view. I double clicked a button to begin coding and up popped a ton of stuff in the code view that I had never seen before. I closed that, and somehow closed the design view by accident too. Now I can't get my design view back, even by re-opening the program (I didn't save), and double clicking the form to open it. It opens up as "Form1.vb" rather than "Form1.vb [Design]".What happened, how can I fix this and get my design view back?
How can I get back the design view mode in Visual Studio 2008? I closed the design view mode and I can't see any option to view my form in design mode.
I am getting trouble in designing report. The interface of design and view mode is different. the alignment of the view mode for paragraphs are different from the design. The following is my design interface: The following is my view mode: All the setting are the same, but there has different on it.
So there I was working on a project. I was putting the finishing touches on the GUI and clicked on the Image list I had added. VB froze up a moment, and when it came back I was on a code view of the form showing the properties I had just set up in the GUI. Suddenly, I can in no way view the form. I get a View code option, but no View designer. If I close out the project and open another, there it is "View Designer" right where I expect it. But in the project I was working on, it is just plain gone.
Is there something I am missing here? Can I recover my project?
If I run it in the debuger the whole form shows perfectly, I just can't get to it to edit it.
Just a quick questio with what I'm sure will recieve an incredibly simple answer.Problem: After saving and restarting Vb the project I am working on seems to lose design view. In the 'view' drop down menu where you would see 'code menu f7' 'design view shift + f7' I only see the code view and not the design view. The tab for my project which would normally say form1.vb (design) now only says form1.vb. The coresponding window for that tab does not show the GUI I had created just a blank white page.
I have developed a win form application using vb.net 2.0, mistakenly my vbproj file deleted. Now the issue is that when i open the solution in the design view all my forms ( 170 + ) shown blank. but when i run the application all the controls are properly displayed and application is running fine. Issue is why all forms are shown BLANK in design view , as i cant make any changes to the design now.
Design view shows an error message with projects that I open and with new projects. I can create or edit a project using code and properties. I just can't see anything but the error message in design. I can double click a label or text box and it will be added to the form, and I can edit it, just not see the form in design view.