Design view shows an error message with projects that I open and with new projects. I can create or edit a project using code and properties. I just can't see anything but the error message in design. I can double click a label or text box and it will be added to the form, and I can edit it, just not see the form in design view.
View 2 Replies
When I attempt to drag a WMP control from the toolbox this error arises: [code]Has anyone had this problem? I was able to add this component previously, however this was on my desktop computer.
View 1 RepliesI have a windows application with a large form named QueryForm which I can no longer open in the design view. When I debug the project the form displays as normal and when I view all files you get the two files QueryForm.Designer.vb and QueryForm.resx. Is there any way I can re-assosciate this file as a form so I can use the design view again instead of having to recreate the form all over again? I have added a new form which works fine in design view and cannot think of any reason why the form will not work in the design mode
View 12 RepliesDeserialization Error when trying to view a form in design mode.Unable to load type [code]...
View 4 RepliesThere is no editor available for 'file path here'. Make sure the application for file type (.vb) is installed. This is the error that I get when I try to open a project I did a while back in VB. I tried a C# project and I can open the form for viewing fine, but for some reason VB won't work? I really don't want to do a repair on the whole application as it takes a while and I'm not even sure I have the ISO right now.
View 1 RepliesHow can I get back the design view mode in Visual Studio 2008? I closed the design view mode and I can't see any option to view my form in design mode.
View 10 RepliesJust a quick questio with what I'm sure will recieve an incredibly simple answer.Problem: After saving and restarting Vb the project I am working on seems to lose design view. In the 'view' drop down menu where you would see 'code menu f7' 'design view shift + f7' I only see the code view and not the design view. The tab for my project which would normally say form1.vb (design) now only says form1.vb. The coresponding window for that tab does not show the GUI I had created just a blank white page.
View 8 RepliesI often get this problem. I open a form in design mode and the form is not in view and scrollers can't get to it. Sometimes it's cut in half and the other half is outside the window but there's no way to move the form inside the design space to see the form in full. Sounds like a lame problem but I can't find a way to properly open the form
View 1 RepliesI had saved a file in VB Express 2008, Windows 7, but when I opened it the next time, everything showed up, but Form.vb [design] wasn't there. I can't find it when I showed all files in the solution explorer, and there's no error in the code because the project can be debugged.
I have tried to see other solutions to this problem, but since I have tried those solutions as well without success, I made an account. Since I'm new to using VB, I think that I have accidentally pressed a wrong button, but I don't think there's a button that prevents your Form.vb [design] from showing up ;). I hope this is enough info and I have posted it into the right forum...
I have created my webpage in asp.net in 1024*768 resolution, my problem was that when i change my monitor resolution then the controls in my webpage will be displayed in unmanaged manner .
How to arrange items in my webpage which support multiple resolution ...
Whatever the resolution of my monitor the controls in my webpage will display as it is as managed in 1024*768 reolution !
I am using the listbox control. Now I know how to change all the items in the design view. But how can I change it through code so I can change what it says during run time. How can I get it to say have 5 options
1
2
3
4
5
Using code?
I know I need to use:
listbox1.items = XX
But I dont know what to put in the XX
Figured out I need to use listbox.items.add("String")
I seem to have reached a limit on the size of the form. I cannot make the form longer and I need to add more fields. Is there a limit on how many fields can be included in a form?
View 1 RepliesI have just started using VB 2008 Express i couldn't find a forum for this version. Im having trouble working out how to open my form in design view rather than code.
View 4 Replieshow to add a MainMenu to a form in VB 2008 Express using the design window. I only see MenuStrip in the toolbox. I can add a MainMenu programatically, but not visually. The reason I need a MainMenu and not a MenuStrip is for owner-drawing. None of the MenuStrip items seem to have an OwnerDraw property.
View 9 Replies2. Display Form1.vb in design view.
3. List the controls by the Name property and the control names, if any, that are not descriptive.
4. Change the Text property of the form to "Hangman."
5. Change the FormBorderStyle property to Fixed3D.
6. Explain why the form should not be resizable.
7. Change the Font of lblWord to Size 12 Bold.
8. Reposition lblWord so that its left edge is aligned with the left edge of the PictureBox picBody (the box in the center of the form).
9. Add code to the btnExit_Click event procedure to close the form, and exit the application by calling the form's Close method.
10. Add code to the btnNew_Click event procedure to:
[Code]...
i have a project with two forms. now when i open this project using vb.net 08, only code window opens. i cant switch to design view.
View 5 RepliesI was loading my project when my computer rebooted suddenly. After it came back up, I went to load my project again and got an error about "an error occured when loading in the design view..this has been disabled" - sorry I did not get the exact message but it was something like this. Then when my project opened up, I now cannot see my form in the design view anymore. It still run's fine, but there is no code displayed and the form itself does not display in IDE anymore. I can see the code for the form only on the form.designer.vb mode.I have continues backup installed, and restored several versions of the class files for the form, but yet still no luck.
View 4 RepliesAll of suddenly I can not see a form in design view. I am getting 57 errors and all of them have this error.... They type 'Windows.My.Resources.Resources' has no property named '....'
My project runs fine. I can compile and do all that good stuff. But I can not see for in design view.
I am making a program using Windows Form Application, and I had it set up in the design view. I double clicked a button to begin coding and up popped a ton of stuff in the code view that I had never seen before. I closed that, and somehow closed the design view by accident too. Now I can't get my design view back, even by re-opening the program (I didn't save), and double clicking the form to open it. It opens up as "Form1.vb" rather than "Form1.vb [Design]".What happened, how can I fix this and get my design view back?
View 2 Replieswhy i cant see the Form Design?and when i double-click the Form1.vb on the Solution Explorer i got error:does anyone here encounter this probz before?how to fix this.. (should i reinstall vbnet?)
View 1 Repliesi'm on day one with VB05 express Beta 2 after a several-year break from VB6 after having a sudden surge of programming inspiration. i must say i'm quite impressed with a lot of the features, however, i'm really stumped by something that must be so simple that i'm just looking too hard or something.i've been looking for hours at how to return to the graphic design view of a form. i can't find it anywhere. all of the code from when i closed my project is still there but the visual representation of the form itself is nowhere to be found.
View 4 RepliesI am getting trouble in designing report. The interface of design and view mode is different. the alignment of the view mode for paragraphs are different from the design.
The following is my design interface:
The following is my view mode:
All the setting are the same, but there has different on it.
I have somehow managed to loose/hide a button that is displayed on my form.
When I go to create another button and give it the same name, i receive The name btn_submit is already in use by another component.
I have created one application which have one mdi parent foem and after that i have designed 3 more forms. now from solution wxplorer whenever i click in mdi parent form i doesont show its design pane.. how can i see the design view of mdi parent form.
View 5 RepliesSo there I was working on a project. I was putting the finishing touches on the GUI and clicked on the Image list I had added. VB froze up a moment, and when it came back I was on a code view of the form showing the properties I had just set up in the GUI. Suddenly, I can in no way view the form. I get a View code option, but no View designer. If I close out the project and open another, there it is "View Designer" right where I expect it. But in the project I was working on, it is just plain gone.
Is there something I am missing here? Can I recover my project?
If I run it in the debuger the whole form shows perfectly, I just can't get to it to edit it.
I was working on a project in vs 2005 and decided to see my project's form in microsoft blend, the form did not show and i closed blend and saved no changes. The next time i open my project in visual studio, my form1 design mode shows me some code for the windows form designer. How can i get my form back as i need to add more controls and change the orientation of some others?
View 10 RepliesI have developed a win form application using vb.net 2.0, mistakenly my vbproj file deleted. Now the issue is that when i open the solution in the design view all my forms ( 170 + ) shown blank. but when i run the application all the controls are properly displayed and application is running fine. Issue is why all forms are shown BLANK in design view , as i cant make any changes to the design now.
View 8 RepliesI have created a form in vb.net.Suddenly I lost three textboxes from the design view of the form.Can recover my original form?
View 1 RepliesI am using visual studio 2008 professional edition, and i need some help in my assignment project.below are my screen interface and my database design view, relationship view, and coding and this is my coding Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
[Code]...
:( I am have been trying to update changes from my vb.net program to an access database file and it simply will not work. I have am using table adapters. I'm not familiar with SQL so i can't go that route. It updates the dataset fine but not the database...
I have pasted my code below.
Private Sub BooksBindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BooksBindingNavigatorSaveItem.Click
[code]....
