I often get this problem. I open a form in design mode and the form is not in view and scrollers can't get to it. Sometimes it's cut in half and the other half is outside the window but there's no way to move the form inside the design space to see the form in full. Sounds like a lame problem but I can't find a way to properly open the form
View 1 RepliesI have just started using VB 2008 Express i couldn't find a forum for this version. Im having trouble working out how to open my form in design view rather than code.
View 4 RepliesI seem to have reached a limit on the size of the form. I cannot make the form longer and I need to add more fields. Is there a limit on how many fields can be included in a form?
View 1 RepliesI was loading my project when my computer rebooted suddenly. After it came back up, I went to load my project again and got an error about "an error occured when loading in the design view..this has been disabled" - sorry I did not get the exact message but it was something like this. Then when my project opened up, I now cannot see my form in the design view anymore. It still run's fine, but there is no code displayed and the form itself does not display in IDE anymore. I can see the code for the form only on the form.designer.vb mode.I have continues backup installed, and restored several versions of the class files for the form, but yet still no luck.
View 4 RepliesAll of suddenly I can not see a form in design view. I am getting 57 errors and all of them have this error.... They type 'Windows.My.Resources.Resources' has no property named '....'
My project runs fine. I can compile and do all that good stuff. But I can not see for in design view.
i'm on day one with VB05 express Beta 2 after a several-year break from VB6 after having a sudden surge of programming inspiration. i must say i'm quite impressed with a lot of the features, however, i'm really stumped by something that must be so simple that i'm just looking too hard or something.i've been looking for hours at how to return to the graphic design view of a form. i can't find it anywhere. all of the code from when i closed my project is still there but the visual representation of the form itself is nowhere to be found.
View 4 RepliesI have created one application which have one mdi parent foem and after that i have designed 3 more forms. now from solution wxplorer whenever i click in mdi parent form i doesont show its design pane.. how can i see the design view of mdi parent form.
View 5 RepliesI was working on a project in vs 2005 and decided to see my project's form in microsoft blend, the form did not show and i closed blend and saved no changes. The next time i open my project in visual studio, my form1 design mode shows me some code for the windows form designer. How can i get my form back as i need to add more controls and change the orientation of some others?
View 10 RepliesI have a windows application with a large form named QueryForm which I can no longer open in the design view. When I debug the project the form displays as normal and when I view all files you get the two files QueryForm.Designer.vb and QueryForm.resx. Is there any way I can re-assosciate this file as a form so I can use the design view again instead of having to recreate the form all over again? I have added a new form which works fine in design view and cannot think of any reason why the form will not work in the design mode
View 12 RepliesI have created a form in vb.net.Suddenly I lost three textboxes from the design view of the form.Can recover my original form?
View 1 RepliesI have a custom UserControl that I am hosting inside a FlowLayoutPanel. Each time that I run the application the control will disappear off the hosting form's design view. I have to close the form's design view and then reopen it each time. The control is not getting removed in any way, just isn't being shown.
Edit, alright this got a bit weirder. Only the first usercontrol that I put into the FlowLayoutPanel disappears. This problem also happens on a project Build and Rebuild.
Deserialization Error when trying to view a form in design mode.Unable to load type [code]...
View 4 RepliesIs there a shortcut to get to the designview form in a winforms project in visual studio 2010.F7 will take you to code behind class form and shift + F7 will take you to design mode. Is there a shortcut to filename.designer.cs formWhere you have the control definitions, delegates (for click event etc). defined. I go to the form often if I change the name of click event etc.I have to go through solution explorer and click on the file. Is there a shortcut like F7 that opens the designer.cs file?
View 1 RepliesI have a project which still runs fine without issue however i dont seem to be able to access the design view of Form1. The icon in soultions explorer has also changed from a form to a sinple vb reference. Im unable to right click in solutions explorer and view designer as there is no option there.
View 6 RepliesI made a very simple web browser with three forms last night, saved the project and came to re-open it this morning only to find that form1 and form2 cannot be edited in anything but code mode now.Very confused. Am using Visual Basic Express 2008 on Windows 7 x64.
View 2 RepliesI have created a form and dropped a MicrosoftReportViewer onto the form. It appears in the control panel on the bottom of the design view but it will not show up in the form. This is the second form I have done like this. The first one is fine. I can see the report viewer in the form and reports work correctly. For the second form nothing. Something I did notice is that in the first form the ReportViewer1 has a name in properties. In the second form there is no line with the name of the control.
View 4 RepliesI created primary/start up Form for my VB2005 app (called Admin.vb). Now when I go back to the solution explorer, I can see Admin.vb but it doesn't have the form icon and clicking it doesn't open the form. Instead it opens the code.All of my other forms are fine and have the right icons and open in the [Design] view ...The form obviously still exists as it opens in runtime but I can't seem to open the design view for it.
View 6 RepliesI am encountering a very mysterious error which I have not encountered before. While trying to use VIEW DESIGN OPTION in VB.NET 2003
Solution Explorer to maintain the existing FORM the error message list below appears.Here is the error message that appear in the TASK BAR panel at the bottom of the Screen Property accessor 'IsMdiContainer' on object 'System.Windows.Forms.Design.FormDocumentDesigner' threw the following exception:'Specified cast is not valid.'
How can I get back the design view mode in Visual Studio 2008? I closed the design view mode and I can't see any option to view my form in design mode.
View 10 RepliesJust a quick questio with what I'm sure will recieve an incredibly simple answer.Problem: After saving and restarting Vb the project I am working on seems to lose design view. In the 'view' drop down menu where you would see 'code menu f7' 'design view shift + f7' I only see the code view and not the design view. The tab for my project which would normally say form1.vb (design) now only says form1.vb. The coresponding window for that tab does not show the GUI I had created just a blank white page.
View 8 RepliesI have created my webpage in asp.net in 1024*768 resolution, my problem was that when i change my monitor resolution then the controls in my webpage will be displayed in unmanaged manner .
How to arrange items in my webpage which support multiple resolution ...
Whatever the resolution of my monitor the controls in my webpage will display as it is as managed in 1024*768 reolution !
Design view shows an error message with projects that I open and with new projects. I can create or edit a project using code and properties. I just can't see anything but the error message in design. I can double click a label or text box and it will be added to the form, and I can edit it, just not see the form in design view.
View 2 RepliesI am using the listbox control. Now I know how to change all the items in the design view. But how can I change it through code so I can change what it says during run time. How can I get it to say have 5 options
1
2
3
4
5
Using code?
I know I need to use:
listbox1.items = XX
But I dont know what to put in the XX
Figured out I need to use listbox.items.add("String")
When I double click on a form control while in the design view in a Web Application project within Visual Studio 2010, say a 'button' or a 'submit' for example, it inserts a javascript function into my .aspx file. When I do this at work it automatically creates an event handler for the control in the code-behind.How do I change this to that setting?I don't want to type those event handler subroutines every time!
View 1 Replies2. Display Form1.vb in design view.
3. List the controls by the Name property and the control names, if any, that are not descriptive.
4. Change the Text property of the form to "Hangman."
5. Change the FormBorderStyle property to Fixed3D.
6. Explain why the form should not be resizable.
7. Change the Font of lblWord to Size 12 Bold.
8. Reposition lblWord so that its left edge is aligned with the left edge of the PictureBox picBody (the box in the center of the form).
9. Add code to the btnExit_Click event procedure to close the form, and exit the application by calling the form's Close method.
10. Add code to the btnNew_Click event procedure to:
[Code]...
When I attempt to drag a WMP control from the toolbox this error arises: [code]Has anyone had this problem? I was able to add this component previously, however this was on my desktop computer.
View 1 RepliesThe title pretty much precisely asks the question, but I shall repeat;
When I double click on a form control while in the design view in a Web Application project within Visual Studio 2010, say a 'button' or a 'submit' for example, it inserts a javascript function into my .aspx file. When I do this at work it automatically creates an event handler for the control in the code-behind.How do I change this to that setting? I have used '/resetsettings' already, and other answers to similar questions do not solve my problem. I have reinstalled, gone through every menu I can find (though I may have missed something)I don't want to type those event handler subroutines every time!
i have a project with two forms. now when i open this project using vb.net 08, only code window opens. i cant switch to design view.
View 5 RepliesI have a question regarding the manipulation of a form at runtime. Let's say I created a simple form in the form designer before runtime containing a couple of buttons, text boxes and labels. While the program is running, I would like to change properties of these controls, while having the ability to move them around, along with the addition of newer controls, say a listbox.
After the form is 're-designed', I would like to save the new settings of my form, in either a database or settings file. Whats the best way to implement this?
I need some info how to design/code a form, that only refreshs some parts of the content. Like a frame inside a webpage, that's loaded with AJAX, and the rest of the page maintains the same aspect.I know an application that acts exact the same way that i'm trying to do, but i don't know if i can refer the name.I want my form splitted in three, the top (unchanged), the middle that changes with the options of the user, and the bottom.
View 1 Replies