i am making my final year project in vb.net for data entry i want to make the project more user friendly i use code to change the control focus by pressing 'Enter'(ASCII 13).. and clear the content of current control by pressing 'Esc'(ASCII 27)... in my project one form contains at-least 300 of controls say(t1,t2,t3,t4...)
so in the keypress event of t1 i have writen
if asc(e.keychar)=13 then
t2.focus
elseif asc(e.keychar)=27 then
t1.text=nothing
end if
the code works fine but produce an alert beep when i press ENTER to change the active control...
I want to format my textboxes in such a way that when someone fills in the details in the textbox if they press enter button on the keybord the focus is given to the next textbox that they should fill in .I tried the code below that we used in vb6 but its not working.
Inside a multiline Text Box I want it so that when a user presses Ctrl AND Enter then a new line is entered. But, if they press Enter on it's own, then it acts like the Accept button on the Form. I believe this is how Facebook does it. Ctrl+Enter=NewLine Enter=Accept
I have a ToolStripTextBox (the name of it is SearchBox) and I would like it when after the user types something and presses enter it takes them to a URL. I've got the URL part sorted out, but I need to know what goes afterI don't see any event in the intellisense popup for something when the user presses "enter."So, in other words, how do I perform an action after the user presses enter?
Private Sub ToolStripComboBox1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SearchBox.**?????** Dim SearchString As String
When the cursor presses on the location, it will write in the box the word Enter. Now what I want it to do is, instead of writing the enter, it would get the word from a textbox1 and would write it in the box that the cursor pressed.
I am trying to allow a user to press enter in a text box to trigger a text change of an object... 1. Say u put 2 in a text box called "Number" and 2. When you press enter, 3. Another object named and shaped as a book to change it's text, that u can see on the picture to "write".. 4. Originally the book will have the text "Start" on it
Do I changed the "number text box" enter event? Private Sub xNumberTextBox_Enter(ByVal sender As Object, ByVal e As System.EventArgs) Handles xNumberTextBox.Enter Me.NumbertextBox.AcceptsReturn = True end sub Is what I have so far.....
In reading various answers regarding "masked TextBox Control, am I to assume that the masked textBox control uses a mask to determine what characters the user can enter into the control?
I have built a webcrawler where I use a webbrowser control for a user to enter a url and perform a search. Once the page is uploaded, my app grabs the HTMl and then with a button click convert it into plain text by using html agility pack (HAP). Finally by clicking a button I store the result inside a sql server database.
Now I want to use a background search system using the above control to perform the task which I am not able to figure out Basically say If I have a textbox where I enter the URL and it grabs the HTML then using HAP I have convert it into plain text and store it inside a database.Here is my code class for the normal search I carry out:
I'm trying to work out how to detect if the user has pressed an f key I have this so far:
Private Sub Form1_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles Me.KeyPress Label1.Text = e.KeyChar End Sub
This detects when the user presses a character key and outputs it via Label1.text, but it doesnt work on all keys?
I am writing a function that should sound a beep every two seconds until the user either clicks the mouse or presses any key. The code I have written appears to work for the mouse click, but it ignores keystrokes:
i want to make a message box appear when the user presses Alt k (then) Alt e (then) alt j . is this the correct code to use?:
Private Sub form1_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles txt3.KeyDown Dim intcount As Integer = 0 If e.Alt And e.KeyCode.ToString = "k" Then intcount = intcount + 1
I made a tic tac toe game. and i was wondering how would code it so that when a user presses a button or when a user wins it makes a beep or some kind of music
how to make an event happen when user presses a key ... let's say space or whichever...and the other thing - how to display a folder on my hard disk ("E:Music") in a ListView box in my program?
I'm trying to find out a way to detect when ever the user presses CTRL -ALT - DEL or Window + L to lock the PC.The code I'm using is
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick If (GetAsyncKeyState(17) AndAlso GetAsyncKeyState(18) AndAlso GetAsyncKeyState(46)) Or ((GetAsyncKeyState(91) Or GetAsyncKeyState(92)) AndAlso GetAsyncKeyState(76)) Then[code]....
However, as soon as the user presses CTRL-ALT-DEL the Windows Security Screen comes up and it is too fast for VB to detect that the keys have been pressed.I did a little reaserch on how to work around this issue and found that a GINA stub can be written which can delay the Windows Security Screen by some time say 2 secs which would be enough for VB to detect that the keys have been pressed.Also disabling Ctrl-Alt-Del through VB does not work because it is too fast for VB and I would like not to disable CTRL-ALT-DEL
I am using GDI to draw an image of a character on the screen and I would like to animate the character when the user presses an arrow key. Here is my character
character code character.DrawImage(My.Resources.Right_Standing, 12, 340, 40, 36)
I am using this method
method Protected Overrides Sub OnPaint(ByVal e As System.Windows.Forms.PaintEventArgs)
i'd like to know how to make an event happen when user presses a key ... let's say space or whichever...and the other thing - how to display a folder on my hard disk ("E:Music") in a ListView box in my program?
I have a vb.net application that uses Flash movies (AxShockwaveFlashObjects.AxShockwaveFlash). I have buttons in the flash movie. When they first start using the application, they can single click on the buttons in the flash movie and button responds accordingly. But after a while (and I haven't been able to pin-point an exact thing that changes it or my issue would be solved), the user has to double-click on the button in the flash movie for them to work.
im trying to make a program that only listens to a few keys that the user presses, and if one of them is pressed, it carries out a specified command.for example, right now,i found a keylogger that could carry out my command, but id rather use something else if possible. right now, i have a timer running this:
For i = 1 To 255 result = 0 result = GetAsyncKeyState(i)[code]....
Then, in the textbox1_textchanged, i search for like if textbox1.text.contains("M") or something.problem with this, is im pretty sure its a keylogger, and i dont want to have to have that. also, it does not work in vista.
Found a solution! (should have researched more throughly!) Option Strict On Imports System.Runtime.InteropServices[code].....
I want to get the active control (control which has the focus or where the cursor is on) each time the cursor moves to another control or each time a control receives a focus.
how to send e-mail?I don't know what's the code for send e-mail. Can anyone teach me how to?I have a button on the Menu Tool. I want when user presses that button, it will directly link to the Microsoft Office to send e-mail to me.Please teach me.By the way, I also want to know how to load a text file. I want to make another button on the menu tool so when user presses it, a text file will pop up.
Currently working in VB 2008 Pro. I have a web site connected to an SQLExpress database. I have a databound form that needs to calculate some basic math. I have a button Click event in code behind file, when I try to enter code intelisence not active and fields not available. I tried to work the math in the select query SqlDataSource, but form would not update only insert.
For example here i have create a user control. the user control contains labels. when the user hit right arrow button on keyboard, the control will appear on form1. when the user control is there. user can select a label. and when user hit buttons on keyboard, the label.text will change according to the button hit on the keyboard. i have done this code. i just write it roughly here.
[Code]...
is this code above should i write on usercontrol1 code area or form1 code area? because i got confused here.
I have a User Control with a label on it. I have a Master Page that I have dropped the User Control on. I have other .aspx pages that use the master page that has the user control on it.
What is the best way to change the text of that label on the user control from the .aspx page?
I have created a user control with some properties but when I change them in a form and build the return to the default value, Here is the code I did: Public Property ButtonFind As Boolean Get Return CmdFind.Visible End Get Set(ByVal value As Boolean) CmdFind.Visible = value End Set End Property
I have created a user control and need to know how I can let the user change some of the properties of this control at runtime and have the values persist on next startup. There are multiple instances of this control on the form.
I have numberic updown control in my app. There may be times when I want to programatically change the vlaue (in which case I don't want to ValueChanged event handler code to run). There will certainly be times when the user makes a change (in which case, I would want the event handler code to run).
