Change What The BindingNavigatorPositionItem And BindingNavigatorCountItem Display
Mar 31, 2011
I have a VS2008 solution looking at data in a sql express table. I've got a Binding Navigator on the form, with all the usual controls. If there are, say 20 records, the BindingNavigatorCountItem shows 20 and the BindingNavigatorPositionItem shows the number between 1 and 20 whichever record I'm looking at, as it should.
I have a field in the table that gives each record a unique number. In a collection of 20 records, this unique number could be 20 different numbers in between 150 and 230, for example, as records have been deleted and added over time, or depending on the filter criteria applied to other fields in the same table.
Is there a way to show this unique field value in the BindingNavigatorPositionItem box, rather than the sequential number in the collection? and be able to type the unique number in that box and have the record jump to that one?
View 3 Replies
ADVERTISEMENT
Jan 22, 2010
I'm using a bindingnavigator. My datasource has the column "key1" marked as unique = true. The user presses the "+" button on the screen. A blank form is presented as expected to allow entry for the new record. The user enters "A" in the "key1" field, "A" already exists in the dataset as all records have been returned by the fill command of the tableadapter, the user then, without attempting to click the save button, clicks in the "PositionItem" textbox in the bindingnavigator. They then enter a number (say "1" for instance to go to the first record in the bindingsource), when they press enter an unhandled exception of type ContraintException is thrown. The exception is expected since the Constraint is not met. But how can I handle this exception, or how to I reimplement the code to do the work of the "PositionItem"? I know how to override the "movenextitem", "movepreviousitem", etc.
View 2 Replies
Sep 27, 2010
I have a change calculator program that has two user inputs and 6 outputs. The user inputs how much money is owed, then how much money is received. IT will then display how much change you need to give back. It should also display the different types of currency that are available to give as change. Here is my code so far.
[Code]...
View 7 Replies
Jan 8, 2012
I need to know how can I change my ipaddress and also display it in visual basic 2010.net.
View 1 Replies
Dec 14, 2009
I need to show the tooltips over a datagridview cell and that is currently achived using the tooltiptext of the datagridview cell property. I just need to increase the default duration of time that is tooltip is visible
View 2 Replies
Mar 24, 2010
I need to change the display resolution to a custom resolution like 1240x712. I already tried it by using the win32 API to call ChangeDisplaySettings but that fails to set the display to any custom resolution. And besides a friend of mine said I maybe could use DirectX to do this one, is that a possibility?
View 5 Replies
Jan 19, 2011
ill get the obviuose out of the way. I have XP Pro, VB2010, query(read only) to an ODBC db, displaying several results in a text box. How can I make the data display w/o the the numbers displaing decimal places. These are quantities that are to be displayed not pricing, ie. the result would say 7.0000 qty on hand, and it should say 7 on hand. The code is below,
[Code]...
View 1 Replies
Nov 12, 2009
I have a datagridview that displays text from a cell in a tooltip when text is too long to be viewed in the cell itself. The default length of time, however, is not long enough for me to read all of it.
How can I make the tooltip display for a longer period of time?
View 1 Replies
Sep 8, 2011
It is a cashier change return where the user enter the amount owed and the amount paid and when he/she press calculate the program should display the change due as well as the number of Dollars, Quarters, Dimes, Nickels, and pennies returned to the customer. When I run the program sometimes it gives me the right output and others it gives wrong output and it rounds the output. I just want to let you know that I have the option strict on. I will paste the code below
CODE:
View 1 Replies
Nov 5, 2010
I am new to 3D modelling. I want to create a simple model from a set of know quad elements (4 sided shape discriped by 4 x,y,z, coordinates). All I need to do is to display the model, rotate it and change the color of each element.
View 1 Replies
Jun 21, 2011
How to control the font DPI in .NET WinForms app..How to change the Appearance/UI of win-forms in vb.net as per Windows display setting? default windows display setting is 100%, if i change it to 125% then my win-forms in my application doesn't display properly as per display settings.
View 1 Replies
Feb 4, 2012
I'm using Visual Studio 2010 / VB / dot net 4.0, and I have a drop-down menu in my left column that switches resource languages for the end user. It reads like this:
--------English ------- <<- Engish is always the default top language option
French |
Spanish |
[code].....
View 2 Replies
Feb 28, 2012
Cannot get list box to display each increment and cannot get data to save correctly in order to display.
Public Class Projectile_Motion
Dim initialHeight As Double ' Holds beginning height
Dim initialVelocity As Double ' holds velocity
[code]....
View 14 Replies
Apr 8, 2011
I have a problem in timers, I want to display 2 forms each one after 3 and 5, how to do that? I mean when the first form appears, after 3 seconds another one will appear, then after 5 seconds the second will appear. I have a code where someone gave me here but its for message box only, thus I modify it to put a form still does not work. Here the code I put in the timer below:
Private Sub frmblabla_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
tmrnote.Start()
Private Sub tmrnote_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles tmrnote.Tick[code]....
I still have problem when the message box stops, it displays all the forms together. All I want is when the message box stops, then it display the first form then stop to display the second then stop to display the last. The first form must stay for 3 seconds on the screen, then after 3 seconds the second appears then after 5 seconds the last appears.
View 2 Replies
Jun 1, 2011
In trying to test some graphic features, I am trying to get them to display on load so button doesn't have to be pressed. I used the following code as suggested from forum. Message boxes run but ellipses aren't displayed until button is clicked which is what I am trying to avoid!
Private Sub Form3_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Button1.PerformClick()
Button1_Click(Nothing, Nothing)
[code]....
View 5 Replies
Dec 19, 2009
Im trying to make a custom splash screen , but i cant seem to get it to work. Im trying to display a welcome screen for 3 seconds then close and display form1 (main form).Heres my current code.
[Code]...
View 2 Replies
Oct 19, 2009
i have to create a mortgage calculator (I know we have killed this mortgage calculator). Has to display an amortization table to display the list after doing the calculation. Here is the actual assignment:
Write the program in VB.Net (not Web based) and have it accept user input of the amount, term and interest rate. Display the mortgage payment amount. Then, list the loan balance and interest paid for each payment over the term of the loan. The list will be longer than the screen, so use loops to display a partial list, hesitate, and then display more of the list. Insert comments to document the program.
I have created 4 buttons. Calculate, Clear, List, and Exit. The buttons all work, but the list does not. Not sure what i am doing wrong.
[Code]...
View 2 Replies
Oct 29, 2009
QuoteI would like to display my password from database (MS Access)into datagrid but in invisible. Below is my coding retrieve data from database, but my password is visible,
con.ConnectionString = "PROVIDER=Microsoft.Jet.OLEDB.4.0;Data Source = " & connectionpath
con.Open()
[Code].....
View 7 Replies
Feb 15, 2012
I have two combobox in a form: Cb1 and Cb2
When I load the form, Cb1 and Cb2 are connected to a bindingsource.
When I change Cb1, the code (below) changes Cb2 to show only the items according to Cb1
This is working fine.
The problem is when I change Cb1 , change Cb2 and click the save button..... Cb2 seems to be 'lost'...
I'm using VS2008.
CODE:
View 4 Replies
Dec 15, 2011
I have a DGV I am working on, and I have many columns.
For example I have Columns colcase(Combobox), colreportTime(Time)
the combox shows 4 cases {A,B,C,D}
what I need to do is if the user select "C"
the the colreporttime will show the time of this change unless the old value is C
View 9 Replies
Feb 20, 2012
I'm getting familiar now with using the Dataset Designer and how it makes for quick and easy updates and query of tables. I use to use the OleDB commands and leave the Connection String as a Global Constant so I can easily change it if the server name changes, or if we have to re-direct the .NET to another instance of the database.
But now that I use the Dataset designer I'm concerned that I maintain flexibility and support in the long run. how the Dataset designer works and where it stores it's connection string info? And how difficult that would be to update. It looks like I modify the App.config file, but I'm unfamiliar with this.
What am I getting myself into? It looks like a standard XML file. Is that it?
View 1 Replies
Feb 9, 2011
Ok, so I know I have to change the labeledit to true but that doesn't change the selected node to be able to edit, so how does that work?
Along with renaming I have it set to that a user can add a node. So once the node has ben added how do I let them rename it as it is being added and without being a prompt or inputbox? So lets say I cam clicked on a parent and they click add node, it adds it to parent but I have it so it is default "New" but I want them to edit it as it is added. I think it will be along the same lines as clicking on one and rename but I have to start some place.
View 3 Replies
Nov 30, 2010
Can someone please help me create a very very simplistic sample page as the chat page included is too coomplete. something as simple as detecting a change in the database and displaying the word "change" on screen in realtime for any client connected.and I tried creating a global.asax file into which I added in the line mentioned in the link above, but it does not seem to like the word "Setup" in the line [code]
View 2 Replies
Sep 12, 2009
i databind combobox with datasource ,set display member=name and value member=id....insert into datagridview and then id value are stored in database that is ok.actualy i want to display name in datagridview, not id and insert id in database ,not display name
View 1 Replies
Mar 26, 2009
I have a datagrdview with a large number of columns, but I want to always display it showing the most right handside data columns, as if the horizontal scroll bar was set to the far right - how do I do this?VB2005 starter
View 3 Replies
Dec 2, 2009
whats wrong with my code?if i change the item from the combo box..the textbox not change or has an error?
conn = New MySqlConnection()
conn.ConnectionString = "server=localhost; user id=root; password=12345; database=gigzta; allow zero datetime=no"
strsql = "SELECT accNo FROM accinfo WHERE (completename LIKE '%" & ComboBox2.Text & "%')"[code].....
View 14 Replies
Aug 15, 2011
I have 10 Comboboxes in a form. All these combo boxes have databound items which come from the same column in a table in the database (access 07) (Am designing a billing software, and these comboboxes show the items (10 lines of them).All these combos reside in one Groupbox.Now for the strange (scary/funny) part, whenever I change a value of 1 combo, all the other combos change automatically and show the same value as the one that was changed. (strange!).
View 6 Replies
Jan 13, 2010
I'm working on a simple base form in which all the other forms in the project will inherit. This base form only adds 5 properties (at the moment) dealing with painting a gradient background. The problem I'm facing right now is when I change a property on Form1 (the test form) and click run it doesn't show that change. I also checked the .designer.vb file and when I make a change it's not added to the code behind file, I'm at a loss right now to why.
[Code]...
View 5 Replies
Mar 11, 2011
I am throwing some data out into Excel and am having some formatting troubles. I have 5 columns (date, time, a long number I don't want displayed in scientific notation - text is fine, text, text). I can get it all working with numberformat, however I have to do them different ways.
Date works this way cell.numberformat = "m/d/yy" and it formats it to say 3/1/11
Time works this way cell.numberformat = "h:mm AM/PM" and it formats it to say 8:07 AM
For the long number cell.numberformat = "@" and it doesn't change the format and it gets displayed in scientific notation
BUT if I use cell.style.numberformat = "@" it works as it should, but it messes up all of the date and time cells. Apparently when you use style.numberformat, it doesn't just apply to the cell you're working with. If I try using style.numberformat with the date and time formats, they don't change and are entered as if I didn't change the format at all.
View 1 Replies
Mar 20, 2010
So, I've got a text boxes which loads up a content from a XML file, usually a numbers I want a button, so when I will change the numbers on the text box, the data in file will change as well, in other words a save button That's how the data is being taken from a file
[code]...
Those EditPaths, Playa2 etc are making up a path to a file
View 20 Replies
