Communications :: Get The Default ISP's SMTP Settings?
Aug 27, 2008
I created a mail sending software. The problem is it cant get the default SMTP settings of a machine. How to do that in visual basic 2005 (VB.Net 2).I tried to parse it from outlook.But failed. Again, some other software can get it without outlook. So, i want to know the way of getting this settings.
View 3 Replies
ADVERTISEMENT
May 27, 2009
I'm using the following code to send simple SMTP mail. the code sends successfully on the development PC however, as soon as i move this to another environment (another PC) the message delivery fails..
Observations:
>> Locally I'm using a version of .Net (2.0.50727) (under application properties > references)
>> The remote machines for which this is failing on has various version of .net 1, 2, 3
>> I'm using the VS2005 and publishing with the wizard
>> Used a packet sniffer to monitor the network interface connected to the network and the no traffic is being generated by the source/sending PC.
Imports System.Net
Imports System.Net.Mail
Code:
Public Sub SendEmail(ByVal Email_To As String, _
ByVal Email_CC As String, _
ByVal Email_From As String, _
ByVal Subject As String, _
[Code] .....
View 1 Replies
Jun 17, 2011
Imports System.Net.Mail
Partial Class ContactUs
Inherits System.Web.UI.Page
[Code].....
what is wrong with my smtp settings? i cant send emails.
View 1 Replies
Dec 3, 2011
I need to print the contents of 3 textboxs to default printer. what examples I have found dont seem to work. I was trying the documentprint1 component as i thought it would be easy but cant figure out how to tell it what to print the second part is to print a variable (string) to the printer as well.no need for user to select just straight to default printer with its default settings
View 1 Replies
Jan 19, 2010
I recently made an application which have some settings one of them a saving path
I want to make check if the saving path settings is available or not (drive)
If not so it got a default value which is application path
I tried to Change the default settings in the My.Settings by writing "Application.startuppath"But the application accept it as a string is there any way do dodge this problem?
View 6 Replies
Mar 22, 2011
For instance every new project i find my self setting the same font/size, Form1 Name, form settings, form regions, modifiers etc
View 1 Replies
Aug 14, 2009
I'm using the TcpClient and TcpListener classes to read/write to the network when a request comes in on port 25. All I'm trying to do at the moment is make it so that my server program can receive SMTP messages from other SMTP servers. I've tested in Telnet - if I connect to my own IP on port 25 and type EHLO, MAIL FROM, RCPT TO, DATA etc then all works as it should and the details I entered are logged by the program (it doesnt do anything about delivering these details/email yet).all looks good... but then when I try and just send an email to my domain from my work account I can see that a connection is made to my program and the string "EHLO workdomain.com " is received by my program - my program responds to the remote SMTP server with "250-mydomain.com Hello" and then a CrLF and then "250-OK". After that point however, my app does not receive anything further at all from the server at work. I'm guessing I am doing something wrong with the data I'm returning when it sends EHLO but can anyone point me in the correct direction?
I was using telnet to test with, it seems that I have made it work only with telnet.In telnet each time I type a key the data is passed to the server, however with a real SMTP server it just sends each entire command in one go. So after altering my server a little I can now get it to respond with the 250-OK which I thought it already was doing.. but it still doesnt work. The remote server just sends EHLO and then thats it nothing more.Something interesting, at the moment I am ending all of my responses to the remote server with VbLf - if I change this to VbCrLf (which is what I believe it is meant to be according to the SMTP standard) then I get an infinite amount of empty strings sent to my program (or perhaps some other character that just shows as an empty string in intellisense when stepping through the code). Changing it back to just vbLf or ControlChars.Lf makes it go back to just sending EHLO and then nothing else..
View 4 Replies
Jan 15, 2012
My Program changes it's My.settings to default , it looses the Location Where it is saved This only happens when i move to a new area But if i take a new builded exe and put it in same Dir of old exe then It Remembers old Settings?
View 7 Replies
Mar 30, 2009
I had a quick google nothing come up.For instance every new project i find my self setting the same font/size, Form1 Name, form settings, form regions,modifiers etc
View 2 Replies
Nov 23, 2010
A Windows service written in VB.NET is using the My.Settings namespace for simplicity. There are only three settings to read, and these are read within the constructor of the ServiceLauncher.
I am attempting to install the service as such:
installutil GID.ServiceLauncher.exe
And this is successful, however the config settings it is using are not the ones within the GID.ServiceLauncher.exe.config file, instead it is using the ones baked into the app as Default Settings within Settings.Designer.vb (marked with DefaultSettingValueAttribute). [The questionable wisdom of Microsoft not allowing a developer to ignore default settings is another question entirely].
How can I further diagnose this issue, and maybe force a reload of settings? I tried calling My.Settings.Default.Reload, however this did nothing. All settings are application settings, and only differ by "value" from those in the auto generated file.
I have successfully attached the debugger using System.Diagnostics.Debugger.Launch() and true enough, the settings are still the default settings.
In anticipation of the question, the background: The reason for requiring configuration settings is because this is a very straightforward service that simply executes an exe; and this exe is in configurable location. There are other reasons also, such as I wish to have the service name configurable without recompiling.
View 3 Replies
Jun 28, 2011
I am practicing on how to print from vb.net (2008) i was able to print my text, however I am having hard time changing default page settings.When the script loads up it thinks my default printer is my 8x11 printer and adjusts the label for that. however I am using a small label printer and labels are very small like 1x2inch. After I hit print button I can get the printer dialog box up change the prinet however because margins are wrong, my print out is unaligned. I like to change my default printer at form load step.
View 1 Replies
Aug 13, 2009
I am am having some problems with using My.Settings. I have saved some strings with My.Settings.Save() and am trying to set the strings back to its default value. I have tried using My.Settings.Reload() but it does not do anything. What is the best way to set the strings back to its default value that I have set it to? I have looked around for this question but could not understand what to do to fix the problem. I have gone to msdn.microsoft.com but could not find any good information, only this[URL]..
View 7 Replies
Oct 21, 2009
Using VB2008 Express and I have a group box and in Propities|application Settings I have the backcolour set so that it is saved when the program closes. I have noticed in the "Settings. settings" file it has the default colours, but how do I get them?
<Setting Name="GroupBox1" Type="System.Drawing.Color" Scope="User">
<Value Profile="(Default)">235, 235, 235</Value>
</Setting>
View 6 Replies
Aug 18, 2009
My deployment of upgrades to an application written in C# (.NET 3.0) consist of simply replacing an older .exe with the new one. Because that older version can currently be used by some customers, I simply rename the old version to blahblah.exe.old and copy the new one to the same folder. When the user opens up the application again, the new one loads up.
The problem is, every time I deploy a new version, the user scope settings are always reverted back to the default values.
View 1 Replies
Apr 24, 2012
I have a label printer with the driver loaded with the settings in the driver set I can print the exact label that I want, I have the problem that I need to set the default settings in the driver when the software starts. there are 6 of these printers and the only problem we have found is that different operators like to change the settings.
What I need to do is to set the following commands in the driver so each time the system is started (daily) it loads the settings and works properly.
I need to set
Custom Commands Text, Start, Parsed Text
In the Advanced Setup, turn on use printer settings
Other settings would be usfull but as I cannot set these I do not think I will be able to set others.
I can currently set some of the commands eg,
DefaultPageSettings.PrinterSettings.Copies=2
View 3 Replies
Sep 15, 2011
How can I obtain the default language settings of the computer using vb.net code?
View 1 Replies
May 28, 2011
i am making a revolutionary web browser called bolt and i have nearly finished it!
I would like to add settings but the problem is that when i restart the web browser settings revert to default i tought about saving them into an ini or dat file called setting
View 4 Replies
Jul 12, 2009
How do I reset My.Settings at run time to the initial default values. I want to do this after the app has been running and the user may have save changed settings. The intention is to reset evering to 'factory defaults' as opposed to the last saved value as done by 'settings.reload'.For example in the property below , I want to restore to the value to '90' as given in the default value. I want to do this for all settings.[code]...
View 4 Replies
Jul 27, 2010
how to change the default path of settings file for the application when installing??and where I need to change in application so that the application takes this file as setting file for itself (means it do not search in default location )
View 4 Replies
Jul 22, 2010
MY understanding is like this, for the "website type" of projects:for VB, the default setting for the namespaces and the default setting for references are both stored in C:WindowsMicrosoft.NetFrameworkV4.0.30319ConfigWeb.config.
but C# does not seem to use this global web.config file to store its default namespaces and references settings. One evidence is that you see a lot of "using ..." statements at the top of all C# files whereas you don't see many "imports ..." statements at the top of all VB files. So C# stores the namespace settings in individual .cs files, but where does C# store the reference settings then? Or the C# compiler knows all the reference without having to store it somewhere?
View 1 Replies
Jan 26, 2009
I am using VB2008 Express and am curious how to send a command via RS232 communications. The string that I need to send is 02h PON 03h. The start and end bits are 02h and 03h.
How can I convert 02h and 03h to its ascii form. In hyperterminal, I use the sequence {(hold)ALT 0 0 2} on the number pad to send the start bit.
I am using this code currently without the start and end bits
Code:
View 8 Replies
Jan 13, 2011
The company has been using Visual Studio 2008 and .NET Framework 2.0 for approximately 2 years. During that time we released several versions (4.x.x) of our program to the public and were able to preserve the user's settings using My.Settings.Upgrade.During the past development cycle we upgraded the program to Visual Studio 2010 and .NET Framework 4.0 and changed the version to 5.x.x. Now, when a user upgrades from 4.x.x to 5.x.x they lose all of their settings.However, in all upgrades after that point (ie 5.0 to 5.1) all the user's settings are once again preserved.I checked C:Documents and Settings<USER_NAME>Local SettingsApplication DataCompanyName and it contains two directories:
ApplicationName_Url_aaa ApplicationName_Url_bbb
where aaa and bbb are 32 character strings. All of the user.config files for the 4.x.x releases can be found in the ApplicationName_ Url_aaa directory. All of the user.config files for the 5.x.x releases can be found in the ApplicationName_Url_bbb directory.Based on this information it seems like something changed when we converted our program to VS2010 and Framework4 that is now causing a different 32 character string to be generated. However, we have been unable to track it down.
View 9 Replies
Jan 3, 2012
I have the following structure:OLD: frmMain (WinForm)uscStat (UserControl with Grid) In frmMain I'm able to make some settings and load the result of the settings via LinQ into the Grid of the uscStat.
[Code]...
View 1 Replies
Jan 14, 2009
I just wondered if you can or can't save arrays using the settings system object. There seems to be no way of entering it at designtime. It seems implied you cannot create new user settings.subobjects at runtime. I'm looking to find the easiest way to save a populated array of PictureBox's. If the only way is a self/custom made/managed .ini file then I need to know so i can start on that but I was hoping to use some of all this phaff in the new frameworks usefully.
View 3 Replies
Aug 5, 2009
I am rewritting my application to conform to ms standards. We used to save all settings to registry for user settings, servername, size and locations.so we are now saving them into My.Settings app.config the only problem is that each time there is an update clickonce will isntall the newupdate but now all settings are loist and user has to save everything all over again..
I am trying to follow the book here but it seems i keep getting stuck somewhere. registry has worked fine for years but i understand we must move on, but if stuff like this happens then i just wasted a long time converting all code to conform for it to not work..
View 1 Replies
Sep 8, 2009
Is there a way to maintain application modified Settings in the settings files after a program update? i.e. I have 10 or so values in the settings file and the users can modify them... when I send a program update they revert back to what I initially programmed them to be.
View 3 Replies
Nov 25, 2011
I have a combobox which contains a sample of names selected from a table.Currently the default name displayed in the box is the 1st name found in the table. What I would like to do is display the name of the person who is doing the selection as the default. The name is stored in a public variable 'PubName' and I do not want the user to be able to type into the combobox themselves.Is this possible?
View 2 Replies
Feb 8, 2008
i have created a user setting named 'setmeup' as string, scope = user, value = "magical meow meow!".in my code i access it and assign it a new value like this...my.settings.setmeup = "howdy cowboy!"my.settings.save()application.restart()when the application restarts, i expect the my.settings.setmeup = "howdy cowboy!" but when i check its contents its still "magical meow meow!".but when i use application.exit() instead of application.restart() and manually restart the program, my.settings.setmeup = "howdy cowboy!" which is correct.what must i do? i want to use application.restart() because i don't want the users to double-click the icon again to start the program. i want the program to restart automatically.
View 2 Replies
Apr 15, 2011
1. I can't find the file which reflects changes to user settings. This might be because I just can't find it (I can see a bunch of user.config files but they are all empty - weird!), or...
2. I'm not actually saving them when I think I am.
Regarding 2. - do I need to invoke
Is this all I need? And if so, why are my user.configs empty?
View 1 Replies
Mar 25, 2011
I'm working with an Treeview and i'm new at it and i have 2 questions.
1. How can i save the treeview items, to settings (my.settings.history)
2. How can i save the treeview items as an TXT or XML file or another exception.
View 13 Replies