how to change the default path of settings file for the application when installing??and where I need to change in application so that the application takes this file as setting file for itself (means it do not search in default location )
View 4 RepliesI recently made an application which have some settings one of them a saving path
I want to make check if the saving path settings is available or not (drive)
If not so it got a default value which is application path
I tried to Change the default settings in the My.Settings by writing "Application.startuppath"But the application accept it as a string is there any way do dodge this problem?
I have devloped a small applicaiton in vb.net. Now i have a requirement where i have to change the contents of a text file while installing the application in to the system
View 6 RepliesUsing VB2008 Express and I have a group box and in Propities|application Settings I have the backcolour set so that it is saved when the program closes. I have noticed in the "Settings. settings" file it has the default colours, but how do I get them?
<Setting Name="GroupBox1" Type="System.Drawing.Color" Scope="User">
<Value Profile="(Default)">235, 235, 235</Value>
</Setting>
I need help changing the default installation directory for a deployment package installer. The application's default directory is currently: [ProgramFiles][Manufacturer][ProductName].
What would I change this to, so that I can install the software directly on the root drive; Such as 'C:ManufacturerProductName'?
how would i go about setting a defualt file path for when i open a document? Basically im opening a file from this filepath Dim SavePath As String = "C:VBWorkBook 6Assignment 6Assignment 6Assignment 6Quotes.xml "But if i were to run this program on another computer, how would i change the directory path so it wouldnt be specific to my pc?
View 1 RepliesI'm going to be using a text file to record and save values, line by line, and then pull these values out again upon restarting the application. Almost like a save file of sorts, just for some basic numeric variables.Getting the information in and out won't be too much of an issue, however I am wondering if there is a way that during the installation of this application, I could specify a place to create and save this text file, for eg:
c:ProgramFilesPOSxstocklevels.text
I have VS8 Professional, so I do have the Setup Wizard tool, which may allow me to attach files.
how can I make default path for my text file.Problem is when I send someone my project, he need to write his text file path in code.
View 2 RepliesTo start with, I know that applications scope settings are read only, and user scope settings are read/write. My problem is this: I am creating an application which will be used in a setting where an "administrative" user (admin in this case does not denote any computer ability whatsoever- just the one in control of the computer) will be installing my application onto a computer where several users will likely use the application. I have a number of program settings which I would like the administrative user to be able to set, and have those settings be used for all users who run the program.
View 1 RepliesI need to print the contents of 3 textboxs to default printer. what examples I have found dont seem to work. I was trying the documentprint1 component as i thought it would be easy but cant figure out how to tell it what to print the second part is to print a variable (string) to the printer as well.no need for user to select just straight to default printer with its default settings
View 1 RepliesI'm using Application Settings to set the the text values of my buttons. I want to create a form that will allow the user to change what the text is. Is that possible? I'm using Application Settings because the text needs to save for the next time the program[code]...
View 2 RepliesThis page lists a way to change the default LookandFeel for a .net application using DevExpress 10.2. It's not working for me.[code]...
View 3 RepliesI am developing an application that uses Sendkeys function to output data in another application such as Notepad. But if the user changes the regional settings some characters like "/" change according to the language. Can I retrieve and set the regional settings of another application such as Notepad ? Is there another way to do that ?
View 3 Replieswhen i change the startup window on the application settings it still doesnt apply the change i made
for example i change the startup for to reservation but the startup form in execution is still the client form
I have three radiobuttons in a groupbox. When they are not bound to application settings, they behave normally.After binding each of their checked properties to application settings, the following happens: I have to click an uncheckedradiobutton two times to have it checked. After the first click, all three are unchecked.
View 2 RepliesI have an app that will need a file repository located in a subfolder in my program's directory. For example: c:program files (x86)myapplicationmyfiles But, I need to allow the user to be able to change the location of this subfolder if they wish to store them on a network drive etc..
[Code]...
i have developed a program on Visual Studio.Net 2005, also i have deployed the program and got a shortcut icon on desktop which is fine but when i go to C:\program files\[MyProject]\MyProject.exe, the ,exe file has the default icon, i want to change that default icon to the custom icon. How can i perform this task?
View 6 RepliesI have created a Outlook 2007 AddIn project with a Setup project.The settings for a databae connection are in the registry.Now I want to create a config file outside the msi so the settings for the database connection can be changed before the addin is installed.It is no problem if the settings stay in the config file instead of the registry.I have googled around but found no solution yet.
View 2 RepliesWhen I drag my debug file from the debug folder to the start icon in order to make a shortcut for the application on the start menu, it automatically names the shortcut WindowsApplication1. How can I change the default name for this action?
View 14 RepliesI am just not happy with the fact that the user.config file gtets saved in the user's account folder. Is there a way to save it in the Application's Startup Folder instead? I couldn't find any configuration properties within the PROJECT PROPERTIES which would let me change the file location.
View 2 RepliesUsing Application.GetOpenFilename I'm wanting to direct the user to a url file location but cannot get the chdir function to change to a valid url. Is there another method for this?thanksegchdir "http://mysite/reports/" (this bit doesn't work)Application.GetOpenFilename ("*.csv,*.csv")
View 1 RepliesI've searched the forms and ran into a road block i think due to not really knowing what its called I'm searching for. Here is a simple explanation. I would like to add a button on my form that if selected will change the default application that a certain file type opens with.
[Code]...
I would like to change the output file path of the Adobe PDF Printer via code. Currently I am setting the destination path using the Adobe PDF preferences which works fine, however if I change the path in my program I have to go back to the Adobe printer and manually set the new path. How can I change the Adobe output file path via code?
My.Computer.Registry.SetValue("HKEY_CURRENT_USERSoftwareAdobeAcrobat
Distiller9.0AdobePDFOutputFolder",
"2",
"C:YOUR PATH HERE"
)
I couldn't find an appropriate forum which would suit the type of problem I am facing so I am putting it here.I needed to create an intranet web application that has pages with hyperlinks to eml files. The eml files as is known are email files in MIME format which outlook express can open. However what I found was if eml files are on your machine, it opens in outlook express but when opened as an hyperlink, it opens in Internet Explorer (IE) as an mhtml file. And any attachments that may be in the eml file are not displayed at all!I didn't understand why IE has to poke inbetween. After searching the net, I came across a solution that required changes in the Registry of the client machine.The change is to be made to the node HKEY_CLASSES_ROOTMIMEDatabaseContent Typemessage/rfc822.The following is a REG file that can be imported for this change.[HKEY_CLASSES_ROOTMIMEDatabaseContent ypemessage/rfc822]"extension"=".eml""CLSID"=""However after this change, though eml files opened in Outlook express, MHT files stopped opening in IE.Then I simply deleted the rfc822 node and to my surprise, MHT files opened in IE and eml files opened in outlook express and everything was fine!!But I don't want to use this sledge hammer solution. I want to know what this registry key is for and how can I set it to achieve what I want . i.e. open eml files from web pages in outlook express without affecting other file types
View 8 RepliesI have made an application and It opens rtf files but I would like it to become the default application for opening this file format.
View 1 RepliesI want define where my application and user settings files will be located.I would also like to rename them.For example my project will have a number of folders located inside the application folder when deployed.One of those folders is labelled "Cfg" and i want my application settings files to be saved in there.This is including the user settings, i dont want to localize the user settings file as is done automatically (at least not at this stage).
View 3 RepliesI have one project and in this project I want to save picture to application path and save the path to database as string and retrieve the image from the application path.Can u give me some idea about it..i am using vb.net as frontend and ms access database
View 1 RepliesThe reason I ask is that I want to print, at run-time, a file in the application's resources, like this:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim printProcess As New Process
printProcess.StartInfo.FileName = "C:UsersGeoffrey van WykDocumentsCountdown_Timer_Help.rtf"
' printProcess.StartInfo.FileName = My.Resources.Countdown_Timer_Help
printProcess.StartInfo.Verb = "Print"
printProcess.Start()
End Sub
The reason I ask is that I want to print, at run-time, a file in the application's resources, like this:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim printProcess As New Process
printProcess.StartInfo.CreateNoWindow = True
[code]....
When I use "C:UsersGeoffrey van WykDocumentsCountdown_Timer_Help.rtf" as the argument of FileName, it works. But when I use My.Resources.Countdown_Timer_Help, it says it cannot find the file.
I'm using SharpDevelop and .NET 4.0.
My question is this: If you start a new project with a "Windows Application" template, it generates a Program.vb with the following contents[code]...