I have three radiobuttons in a groupbox. When they are not bound to application settings, they behave normally.After binding each of their checked properties to application settings, the following happens: I have to click an uncheckedradiobutton two times to have it checked. After the first click, all three are unchecked.
View 2 Replies
I recently made an application which have some settings one of them a saving path
I want to make check if the saving path settings is available or not (drive)
If not so it got a default value which is application path
I tried to Change the default settings in the My.Settings by writing "Application.startuppath"But the application accept it as a string is there any way do dodge this problem?
To start with, I know that applications scope settings are read only, and user scope settings are read/write. My problem is this: I am creating an application which will be used in a setting where an "administrative" user (admin in this case does not denote any computer ability whatsoever- just the one in control of the computer) will be installing my application onto a computer where several users will likely use the application. I have a number of program settings which I would like the administrative user to be able to set, and have those settings be used for all users who run the program.
View 1 RepliesI'm using Application Settings to set the the text values of my buttons. I want to create a form that will allow the user to change what the text is. Is that possible? I'm using Application Settings because the text needs to save for the next time the program[code]...
View 2 RepliesI am developing an application that uses Sendkeys function to output data in another application such as Notepad. But if the user changes the regional settings some characters like "/" change according to the language. Can I retrieve and set the regional settings of another application such as Notepad ? Is there another way to do that ?
View 3 Replieswhen i change the startup window on the application settings it still doesnt apply the change i made
for example i change the startup for to reservation but the startup form in execution is still the client form
I want to change the default behaviour of headers in a datagrid. By default, if the sum of all column's width is lower than datagrid's width, then background color appears on the header and I want to keep it just like header's color, as ListView does. I've attached an image to show you in a better way what I want.
View 3 RepliesIn my code I use two classes. One contains the UI form, the other containsa method to write to a file. During coding I found out some behaviourwhich I don't understand. The code below shows (what I believe to be)the relevant part. The file writing part is substituted by a MsgBox for simplicity.I have the following controls in one form:
NumericUpDown
Button
With the following classes and methods:
[code].....
if i want to make a change to a cell in a datagridview when the form loads, how would i go about doing this?
View 19 Replieshow to change the default path of settings file for the application when installing??and where I need to change in application so that the application takes this file as setting file for itself (means it do not search in default location )
View 4 RepliesI have an app that will need a file repository located in a subfolder in my program's directory. For example: c:program files (x86)myapplicationmyfiles But, I need to allow the user to be able to change the location of this subfolder if they wish to store them on a network drive etc..
[Code]...
1) My program has 3 groupboxes each consisting 3 radiobuttons. Based on what is checked in the first box, and then what the user chooses in the second box, I either need to hide the 3 box and choose one option, or keep it showing for the user to select an option. The hiding is because based on the previous choices, there is only one option for the user in the 3rd box, and so I don't want to confuse the user nor waste their time. So I when the user selects radiobutton1, I need to hide groupbox3 and select radiobutton2.This is what I have previously attempted and it didn't work.
[code]...
How can I select the radiobutton using code like shown above?2) My second question is regarding scanning strings. I have 2 output strings. They either print a device or a message saying why the user doesn't get an output. At the end of the code, I need to scan through the strings until I get to a space and then store that as a string. How does one go about doing this?
i bound four datetimepicker.value each to there own application setting using a unique name for each but the only one that will save it's value until the next resart of the program is the first one?
View 3 RepliesI want to be able to control several groups of settings independently of each other. I'd originally used My.Settings, but it was too much work to manually rollback some settings whilst saving others.
I thought my solution was to use multiple settings files, and I've had moments where this seemed to work, but I whatever success I have had is periodic and temporary.
Currently I have two settings files in the root of the project; In code, I can access the settings OK, but in many cases I want to bind individual settings to controls. This should be straight-forward, and I recall it working when I used the single, built-in settings file.
However, when I use the two new settings files it doesn't work. In the Formatting & Advanced Binding dialog, I select Add New Project Data Source, I browse into my project, then into the root namespace, and then I see my forms/classes/settings files. When I select the two settings files, and click OK, the dialog is dismissed without me being able to select an individual setting to bind the control to.
When I enable Project > Show All Files, I can see that the binding has been created; I have two .datasource files under My Project > Datasources.
Is there some reason why I shouldn't be able to bind to these settings files? If not, why can I not access them the the data-binding dialogs?
Plan B is to create an object to act as an intermediary between the controls and the settings files, but I'd rather avoid this if I can.
I just wondered if you can or can't save arrays using the settings system object. There seems to be no way of entering it at designtime. It seems implied you cannot create new user settings.subobjects at runtime. I'm looking to find the easiest way to save a populated array of PictureBox's. If the only way is a self/custom made/managed .ini file then I need to know so i can start on that but I was hoping to use some of all this phaff in the new frameworks usefully.
View 3 RepliesIs there a way to maintain application modified Settings in the settings files after a program update? i.e. I have 10 or so values in the settings file and the users can modify them... when I send a program update they revert back to what I initially programmed them to be.
View 3 Repliesi have created a user setting named 'setmeup' as string, scope = user, value = "magical meow meow!".in my code i access it and assign it a new value like this...my.settings.setmeup = "howdy cowboy!"my.settings.save()application.restart()when the application restarts, i expect the my.settings.setmeup = "howdy cowboy!" but when i check its contents its still "magical meow meow!".but when i use application.exit() instead of application.restart() and manually restart the program, my.settings.setmeup = "howdy cowboy!" which is correct.what must i do? i want to use application.restart() because i don't want the users to double-click the icon again to start the program. i want the program to restart automatically.
View 2 RepliesI was wondering if it is possible to change the Proxy settings("Automatically Detect Settings") in IE without making the change to the registry. I wasn't sure if the Hive is similar in all operating systems, So I figured there has to be an API to make the change, also without having the restart the IE or the computer for that matter.
View 2 Replieswhen Button1 is clicked I want the cursor to change to the Hourglass cursor.
View 4 RepliesI am using the MouseClick event toc change the image of a picturebox when it is clicked:
Private Sub PictureBox7_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles PictureBox7.MouseClick
PictureBox7.Image = Image.FromFile("C:Documents and SettingsjacobscDesktoplogogoclick.png")
End Sub
The problem i have is that this tool will be used on different users computers and not just my own and at the moment when it is used on another computer it gives an error that it can'f find the image.
This obvioulsy happens as it is looking for my desktop, how can i change so that the image can be saved within the tool and therefore will work on other computers?
How do I make the backcolor of a combo box change to red after the user clicks the combo box and makes a selection?
View 2 Replieshow would i go about changing the text property of a button when clicked. Im using panels to switch between what the form shows but when i click the button to switch panels i want the text of the button to change but i cant figure out what property to change and how to go about doing it.
View 2 RepliesFor some reason, I can't change the checkbox from True to False when I click the checkbox in my DataGridViewCheckBoxColumn called "Select". I setup my DataGridView (dgvWBFOrphans) with 5 TextBox columns that are Read-Only and 1 CheckBox column that is not Read-Only. I use a stored procedure and data reader to load the DataTable which is used as the DataSource for dgvWBFOrphans. I want all the checkboxes to default to True and allow the users to uncheck certain rows in the "Select" column.
Dim dtOrphans As New DataTable
Using cnn As New SqlClient.SqlConnection(clsDBConn.clsDBConnections.prpConnString)
cnn.Open()
[code]....
I have a menu strip with a item titled options. This drops down and there is a dropdown list. Then there are various percents that the user clicks to set the transparency of the window. What code can I use to enable the percents to be clicked and the transparency to change?
View 16 RepliesI am fairly new to vb.net and the form includes 3 picture boxes in red which you can click and change their color to green, also each picture box have three text box associated with it and they are by default color dark gray. I want the system to check whether the picture boxes are clicked and if yes set the associated text box colours to white.
Here is the code I wrote:
Public Class Screen
Inherits Windows.Forms.Form
Dim T(1, 2) As TextBox
Dim S(2) As PictureBox
Dim x, i, j As Integer
[Code] .....
I'm using VB.net '08 express and I have a form in a program with a picturebox. I have a series of images in My.Resources. What I am trying to do is get the images in the box to change in sequence whenever the button is clicked.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sequence As Integer
Select Case sequence
Case 1
[code]....
When the button is clicked, the 1st image appears and the button then does nothing.
Imports System
Imports System.Windows.Forms
Class MyButtonClass
[code].....
i am having a problem with a calculator that i am making. i am using radio buttons as selectors for the operations (+-*/). i have two input-boxes. i want to do some error checking. for example if the user want to find the mod of a number, i want them to only use inputbox1 to enter the value. [Code] the problem is that when other radio buttons are clicked the effect doesn't change. how can i fix it so that other radio buttons don't have the same action. i am using visual studios 2008 professional.
View 3 RepliesI'm trying to save a collection of key/value settings in my application's "user settings" (they're column widths), but while I see no errors, when I run the code (in the IDE) my collection in "My.Settings" is always nothing at startup. I do a "My.Settings.Save" when the application exits, and barring the "serializers not found" errors in the IDE, no other errors occur. When I run my application as an exe, it behaves the same way..
View 7 RepliesHow would I go about changing the color of a line of text in a Listbox when the user clicks a button? I have tried using ListBox1.Items(ListBox1.SelectedItem).Forecolor = Color.Gray, but I receive the error "Conversion from string "Mathematics 1" to type 'Integer' is not valid."
View 17 Replies
