It is working with vb6 but when I used vb.net 2008 it is not working
Private Declare Function GetComputerName Lib "kernel32" _
Alias "GetComputerNameA" (ByVal lpBuffer As String, ByVal nSize As _
Long) As Long
Public Function ComputerName() As String
Dim sBuffer As String
[Code] .....
In a Windows Forms Application, since updating to VS2010 SP1 I get the following error in the VS IDE either:when attempting to a open windows form in the designer; orwhen attempting to run the application in the IDE The application and solution builds OK in the compiler. The error message is:Inner exception: "Error HRESULT E_FAIL has been returned from a call to a COM component." System.InvalidOperationException was unhandled Message=An error occurred creating the form. See Exception.InnerException for details. The error is: Error HRESULT E_FAIL has been returned from a call to a COM component.
[Code]...
i have create a setup file with inno software including interop.MessengerAPI.dll of chatting application(with windows live messenger).I have created a setup file with inno of that chatting application.but installed that setup it is work in only my pc it is not work in anather
[Code]...
i have create simple chat application with windows live messenger.I have give reference of essengerAPI type Library.then it works.after creating a setup file with inno software including interop.MessengerAPI.dll of chatting application(with windows live messenger).Install that setup on anather machine then following errors are generates. ( Error HRESULT E_FAIL has been returned from a call to a COM Component).How to avoid or remove this error.?The chatting is not done in windows live messenger.I have give the anather reference ie, Interop.MessengerAPI.dll but same errors will be generates.Interop.MessengerAPI.dll it is supported in windows xp or not?
View 1 RepliesI prepared simple WebSite with e.g. one button.Next after closing the project, I opened it again - and on the form I have instead of button object with information:"Error Creating Control - Button1Error HRESULT E_FAIL has been returned from a call to COM component"After start the WebSite I can see the button every time, problem is only in the design mode.The same situation I have with other WebSite projects
View 6 RepliesI realize this post is rather long, but I wanted to give all the information up front instead of people having to ask me for more information.At the end of the re-installation of Visual Studio 2008, there is this message:
"Microsoft SQL Publishing Wizard: [2] Error: Installation failed for component Microsoft SQL Publishing Wizard. MSI returned error code 1638" in the log file dd_error_vs_procore_90.txt.
I have searched on Google for this whole message and found some references to this error, but I have done what they said worked for them and it did not fix the problem for me.When I searched for just "MSI returned error code 1638", I got that it cannot install something because it is already installed:"Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel".In Add/Remove Programs I see these two programs:
Microsoft SQL Server Database Publishing Wizard 1.3
Microsoft SQL Server Database Publishing Wizard 1.4
Are these programs/versions what the error is refering to? Am I safe to remove them and depend on the similarly-named item which would be newly installed with Visual Studio 2008 - "Microsoft SQL Publishing Wizard"? I still use SQL Server 2000 and 2005 on my computer, as well as 2008. I had installed VS 2008 on my computer before without this problem and also have VS 2005 and 2010.
i m usingin vb.net hw can i call system calculator thought code
View 3 RepliesI'm porting some source code (C/C++) formating macros from VS6 to VS2005. All in all it seemed to work fine after it was adapted to the VS2005 DTE objects. But I'm experiencing a strange error while setting a commented text to the current selection. The following sample procedure shows what happens:
Test procedure
At the end of the re-installation of Visual Studio 2008, there is this message: "Microsoft SQL Publishing Wizard: [2] Error: Installation failed for component Microsoft SQL Publishing Wizard. MSI returned error code 1638" in the log file dd_error_vs_procore_90.txt.
When I searched for just "MSI returned error code 1638", I got that it
cannot install something because it is already installed: "Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel".
In Add/Remove Programs I see these two programs:
Microsoft SQL Server Database Publishing Wizard 1.3
Microsoft SQL Server Database Publishing Wizard 1.4
Are these programs/versions what the error is refering to? Am I safe to remove them and depend on the similarly-named item which would be newly installed with Visual Studio 2008 - "Microsoft SQL Publishing Wizard"?
I still use SQL Server 2000 and 2005 on my computer, as well as 2008.
I had installed VS 2008 on my computer before without this problem and also have VS 2005 and 2010.
I have a windows service written in .NET 2.0 that will run every 5 minutes and executes bunch oracle SQL/PLSQL scripts based on time/validation, it throws the above said error some times against some SQLs, the same SQLs run fine at later point without any error, I have no idea what is going on with the app. I am not sure if this has any thing to do with oracle connection pool as I am properly closing the connections after every SQL execution.
Exception:
System.Exception: Unexpected return code: 1 at System.Data.OracleClient.DBObjectPool.GetObject(Object owningObject, Boolean& isInTransaction) at System.Data.OracleClient.OracleConnectionPoolManager.GetPooledConnection(String encryptedConnectionString,
[CODE]............................
Do you know how to declare a variable that can hold the result of a call to GetFiles?
I don't know how to do this, so I am using the following verbose/duplicative version:
Dim l_v_String_FoundFile As String
If My.Computer.FileSystem.GetFiles("A:u_Au_W", FileIO.SearchOption.SearchAllSubDirectories,
[code].....
Do you know how to declare a variable that can hold the result of a call to GetFiles?
I don't know how to do this, so I am using the following verbose/duplicative version:
Dim l_v_String_FoundFile As String
If My.Computer.FileSystem.GetFiles("A:u_Au_W", FileIO.SearchOption.SearchAllSubDirectories, l_v_String_FileMask).Count = 1 Then
[Code].....
I have two functions written in VB.NET:
1) The first function (call it GetValues()) returns values in a SQL database as a list via a stored proc. One of the fields is DateTimeSubmitted. All of this data is displayed on my webpage using a repeater control. It works fine.
2) The second function (call it NiceDate()) I created to change the DateTimeSubmitted to a nice date such as "one minute ago" or "yesterday".
My problem is I have no idea which is the best part of the process to do the conversion (at point of data extraction or in pageload etc.) or in fact how to do the conversion.
I have just a form in my VB.Net project and even when I try debugging that - there is nothing going on besides the form being loaded - I get the error: No symbols are loaded for any call stack frame. The source code cannot be displayed.
View 3 RepliesTrying to replace Cells(RowIndex,ColumnIndex).Value() calls by row-wise references for performance, I permanently fail at referencing the result. Starting with Excel Interop - Efficiency and performance, which contains the tip to use get_range, i.e.
//get values
object[,] objectArray = shtName.get_Range("A1:Z100").Value2;
iFace = Convert.ToInt32(objectArray[1,1]);
//set values
object[,] objectArray = new object[3,1] {{"A"}{"B"}{"C"}};
rngName.Value2 = objectArray;
[Code]...
However, referencing Values with two dimension indices always returns an "index was outside the bounds of the array" exception. Inspecting the array with the debugger shows a nice 2-dimensional array which should has 17 elements on the second dimension, so Value (0,0) should indeed be a valid reference -- but it isn't:
The debugger lets me inspect Value, I can also drill down to Value(0,0) and see the correct value, but re-evaluating just that element, i.e. inspecting "Value (0,0)" returns above message.
In my project I'm trying to get the caption property of serial ports available on computer. But when I run this code below I get "A first chance exception of type 'System.InvalidCastException' occurred in Microsoft.VisualBasic.dll" exception. I tried putting "Option Strict On" and then I'm getting build error saying it disallows Late binding.
[Code]...
I am trying to upload a file to Mainframe machine from my VB.net application. I am getting the following error.The remote server returned an error: (501) Syntax error in parameters or arguments
[code]...
Using vb.net 2005 - FtpWebRequest for ListDirectory always gets 550 error The remote server returned an error: (550) File unavailable (e.g., file not found, no access).
On both FTPListDirRequest.Method = System.Net.WebRequestMethods.Ftp.ListDirectory
FTPListDirRequest.Method = System.Net.WebRequestMethods.Ftp.ListDirectoryDetails
[Code]...
This line of code freezes on my Win7 dev computer but not my XP dev computer.I am using Visual Studio 2003.
strOutputFile = "c: est.mp3"
When I tried to read the data of a http link using VB.net, an error occur. The error is:The remote server returned an error: (406) Not Acceptable.This error is only occur for some links.
View 2 RepliesI recently revised a VB ListView and removed one column of data, and failed to spot an If ... Then reference to data in the removed column. The code runs without the 'impossible' SubItem query being detected in my W7-64 desktop IDE, but crashes in the compiled/ installed version. In my older XP-32 laptop however the code error is trapped as it should be. I have noticed occasionally that other minor code errors are not trapped in the W7-64 system - is that normal, or has my W7 IDE been damaged somehow? Should I delete and re-install VS 2010 in the W7 machine ... not a trivial task!
View 3 RepliesI have been prototyping a simple site search tool.I found some online references to using webclient.download data. I have a (mostly) working prototype, but it only returns static HTML on the page that is being searched.I also would like to be able to search the contents of controls (such as text in label controls that are set at run time.) In the code below, the data in label1 is not returned.[code].....
View 3 RepliesI connected to the Informix server using RazorSQL, created a stored procedure and tested it, getting the expected answer, so the procedure exists in the database in some form.
I then run the following code:
If ConnectToInformix() Then
Dim cmd As New IfxCommand("dc_routeHasOutstandingQuantity", conn)
cmd.CommandType = CommandType.StoredProcedure
[Code]....
This error does not occur when calling the stored procedure from a live SQL connection.
Error 1 Custom tool error: Failed to generate code. Exception of type 'System.OutOfMemoryException' was thrown. C:Documents and Settingsmiller_aDesktopFront End FCOMOctobaseOctobasefcomDataSet.xsd 1 1 Octobase
What does this mean? I have this error after i tried to add a database to my project in vb.net.If you're not living on the edge, you're taking up too much room
First off, I am new to ASP.net, so this is new territory for me.I am using Telerik controls on a VB.net project. I get the following error as a javascript error for every action on the form. Changing any value, whether its a telerik slider, a radio button, asp:button, submit button, telerik rating. Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500
I understand that the 500 error is an error thrown when the server doesn't have any more details, however I was hoping someone might have had a similar situation and can point me the right direction as I have a good feeling it has something to do with the Telerik controls.
I was able to submit the form using javascript however then I get the following error, and I don't know if they are related or not.Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
I am creating a application in VB.net. I've just managed to get a mssql connection going with the many people on this forum. I am now trying to establish a connection with Sybase server/db. Upon entering the username and password from my application front end, I get the following message:
[Code]...
I am creating a application in VB.net. I've just managed to get a mssql connection going with the rom many people on this forum. I am now trying to establish a connection with Sybase server/db. Upon entering the username and password from my application front end, I get the following message:
View 1 RepliesJust finished reading a book on visual basic "Imports System.IO" and "FtpWebRequest". I double checks this code and tripple checked it but I can't seem to find anything wrong with it, bare in mind I did write it from scratch with help from the book so maybe its full of mistakes.[code]
View 2 RepliesThis code:
vb Dim s As String = strContents '<a global variable) Dim currentPos As Int64 = 0 Dim endPos As Int64 = strContents.Length - 1 '// A dictionary, used to count the frequencies Dim characterCounter As New Dictionary(Of [String], Int64)() While currentPos <> endPos '//
[CODE]...
Gives this error: Value of type 'System.Collections.Generic.KeyValuePair(Of String, Long)' cannot be converted to 'System.Collections.DictionaryEntry'.
I'm trying to use the Shell to have my application call an external application but its not working...I don't understand why. I get the following error: 'System.windows.shell' is a namespace and cannot be used as an expression!
Heres my code....any ideas what I'm doing wrong. Its got to be a simple...stupid error.
Private Sub mnuUpgrade_Click(ByVal Ctrl As Microsoft.Expression.Web.Interop.Legacy.CommandBarButton, ByRef CancelDefault As Boolean) Handles mnuUpgrade.Click
[CODE].....................