i have create a setup file with inno software including interop.MessengerAPI.dll of chatting application(with windows live messenger).I have created a setup file with inno of that chatting application.but installed that setup it is work in only my pc it is not work in anather
[Code]...
i have create simple chat application with windows live messenger.I have give reference of essengerAPI type Library.then it works.after creating a setup file with inno software including interop.MessengerAPI.dll of chatting application(with windows live messenger).Install that setup on anather machine then following errors are generates. ( Error HRESULT E_FAIL has been returned from a call to a COM Component).How to avoid or remove this error.?The chatting is not done in windows live messenger.I have give the anather reference ie, Interop.MessengerAPI.dll but same errors will be generates.Interop.MessengerAPI.dll it is supported in windows xp or not?
View 1 RepliesIn a Windows Forms Application, since updating to VS2010 SP1 I get the following error in the VS IDE either:when attempting to a open windows form in the designer; orwhen attempting to run the application in the IDE The application and solution builds OK in the compiler. The error message is:Inner exception: "Error HRESULT E_FAIL has been returned from a call to a COM component." System.InvalidOperationException was unhandled Message=An error occurred creating the form. See Exception.InnerException for details. The error is: Error HRESULT E_FAIL has been returned from a call to a COM component.
[Code]...
I prepared simple WebSite with e.g. one button.Next after closing the project, I opened it again - and on the form I have instead of button object with information:"Error Creating Control - Button1Error HRESULT E_FAIL has been returned from a call to COM component"After start the WebSite I can see the button every time, problem is only in the design mode.The same situation I have with other WebSite projects
View 6 RepliesI'm porting some source code (C/C++) formating macros from VS6 to VS2005. All in all it seemed to work fine after it was adapted to the VS2005 DTE objects. But I'm experiencing a strange error while setting a commented text to the current selection. The following sample procedure shows what happens:
Test procedure
Lang - vb.net
Webbrowser have "If Webbrowser.cangoback
then..."
[code].....
It is working with vb6 but when I used vb.net 2008 it is not working
Private Declare Function GetComputerName Lib "kernel32" _
Alias "GetComputerNameA" (ByVal lpBuffer As String, ByVal nSize As _
Long) As Long
Public Function ComputerName() As String
Dim sBuffer As String
[Code] .....
error details :"IErrorInfo.GetDescription failed with E_FAIL(0x80004005)."on googling i found that it is b'cse of key word
Private Sub Butn1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim CrewCri As String = Replace(Me.cbo_enroll.Text, "'", "")
Dim ExPeriOd As Integer = Me.cbo_extractlimiter.Text
Dim socT As String = Me.cbo_sections.Text
[code]....
I am creating a application in VB.net. I've just managed to get a mssql connection going with the many people on this forum. I am now trying to establish a connection with Sybase server/db. Upon entering the username and password from my application front end, I get the following message:
[Code]...
I am creating a application in VB.net. I've just managed to get a mssql connection going with the rom many people on this forum. I am now trying to establish a connection with Sybase server/db. Upon entering the username and password from my application front end, I get the following message:
View 1 RepliesI imported an app from vb6 to vb.net It works fine. It has one axmsflexgrid control. Now I want to add another axmsflexgrid control in the same app. I tried to copy and paste from one frame (groupbox) to another and got this error:
"An error occurred while processing this command: Exception from HRESULT:0x800A018A (CTL_E_GETNOTSUPPORTED)"
An inputs on how would I fix this? Or just make a new axmsflexgrid?
I'm making some archeology, dealing with COM+I managed to enlist a simple COM dll as a COM+ component, so far so good.So I've got this 'foobar' com+ component, with it's interface, and the method I'd like to call.My question is then rally simple: how am I supposed to make a call to this component?.NET or VB6 answer is accepted (I have to check the component is OK, don't care about the client)
Edit (06/03/09): Well, I'm confused. so as to work properly, my COM+ component needs it's dll to be registered. Why not? But then, how to be sure I'm making a COM+ call, and not a COM one?
I have two functions written in VB.NET:
1) The first function (call it GetValues()) returns values in a SQL database as a list via a stored proc. One of the fields is DateTimeSubmitted. All of this data is displayed on my webpage using a repeater control. It works fine.
2) The second function (call it NiceDate()) I created to change the DateTimeSubmitted to a nice date such as "one minute ago" or "yesterday".
My problem is I have no idea which is the best part of the process to do the conversion (at point of data extraction or in pageload etc.) or in fact how to do the conversion.
i'm using VB.NET 2003 application program.i'm using WinSock in this program. on Page_Load, i used this code[code]......
View 1 RepliesWhen I am open Excel through work book I got the below error
Exception from HRESULT: 0x800A03EC
I am posting my code Below
Dim xlApp As New xl.Application
Dim oldCulture As System.Globalization.CultureInfo = System.Threading.Thread.CurrentThread.CurrentCulture
'Initialize Excel
[code]....
I have a project in visual basic 6.0 and a ms access as a backend database.I want to create a component also in visual basic 6.0,out of my project and to call it to my project using dll.
View 2 RepliesTrying to replace Cells(RowIndex,ColumnIndex).Value() calls by row-wise references for performance, I permanently fail at referencing the result. Starting with Excel Interop - Efficiency and performance, which contains the tip to use get_range, i.e.
//get values
object[,] objectArray = shtName.get_Range("A1:Z100").Value2;
iFace = Convert.ToInt32(objectArray[1,1]);
//set values
object[,] objectArray = new object[3,1] {{"A"}{"B"}{"C"}};
rngName.Value2 = objectArray;
[Code]...
However, referencing Values with two dimension indices always returns an "index was outside the bounds of the array" exception. Inspecting the array with the debugger shows a nice 2-dimensional array which should has 17 elements on the second dimension, so Value (0,0) should indeed be a valid reference -- but it isn't:
The debugger lets me inspect Value, I can also drill down to Value(0,0) and see the correct value, but re-evaluating just that element, i.e. inspecting "Value (0,0)" returns above message.
I have a project that works fine with one click.. but when I use the setup project it doesnt like to reg my msxml6.dll keeps saying "...msxml6.dll failed to register HRESULT -2147023782.."whats up with that.. do I need to so something special in my package ?its in the list of detected dependencies.. or does that list just tell me whats detected and its up to me to actually add them into the setup package ?
View 3 RepliesThis is a strange one that I have so-far been unable to resolve. Basically, when you click on a function icon within the software application it throws up the following message in box:"An unhandled exception has occurred in your application. if you click continue, the application will ignore this error and attempt continue. If you click quit, the application will close immediately"The specified module could not be found. (Exception from HRESULT: 0x8007007E)See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)
at Universal_Camset.Communications.Transmit(String Data)
at Universal_Camset.VCL_MIC_500_Module.VCL_MIC_500.Send(String Data)
[code].....
This happens on two systems; Windows XP SP2 or SP3 - .net framework 1.1 & 2.0 & all necessary patches etc installed. Just can't seem to get around it. What is more frustrating is I have a test rig that has exactly the same software attributes & it works fine on that.I have even tried full clean O/S install with no other applicationms installed & get the same eratta as above.
i just got my vista 64 bit and i was trying to use XPButtons.ocx
heres the error An error occurred creating the form. See Exception.InnerException for details. The error is: Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))
System.InvalidOperationException was unhandled
[code]....
i think it was activeX component but i can't find it and it wont work with any .ocx files becouse im running a 64bit?
{"An error occurred creating the form. See Exception.InnerException for details. The error is: The specified module could not be found. Exception from HRESULT: 0x8007007E)"}i got the following error...what is this error??can't figure it out...i m using vb2005..vb.net
View 1 RepliesI have just created a new Extensibility Addin for Visual Basic using VS2005 Professional. This addin will be targeted at MS Outlook (I hope).When I look at the References tab of the project properties, I see the following message:-An error occurred trying to load the page.Unable to cast COM object of type 'System.__ComObject' to interface type 'EnvDTE.ProjectItemsEvents'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{22800963-2811-410D-BF87-A7808EAC977D}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).Why does this appear?How do I correct this?
View 6 RepliesI am trying to upload a file to Mainframe machine from my VB.net application. I am getting the following error.The remote server returned an error: (501) Syntax error in parameters or arguments
[code]...
Using vb.net 2005 - FtpWebRequest for ListDirectory always gets 550 error The remote server returned an error: (550) File unavailable (e.g., file not found, no access).
On both FTPListDirRequest.Method = System.Net.WebRequestMethods.Ftp.ListDirectory
FTPListDirRequest.Method = System.Net.WebRequestMethods.Ftp.ListDirectoryDetails
[Code]...
When I tried to read the data of a http link using VB.net, an error occur. The error is:The remote server returned an error: (406) Not Acceptable.This error is only occur for some links.
View 2 RepliesI had a working program a while ago, but now it is giving me an error when I try to insert some data to my Excel-file.I get this error: Old format or invalid type library. (Exception from HRESULT: 0x80028018 (TYPE_E_INVDATAREAD)) For example, one of my Excel referencing codes is:
Dim XL_App As New Excel.Application
Dim XL_WB As Excel.Workbook = XL_App.Workbooks.Open("C:Program FilesIAAExcelitTuntilappu.xls", , True)
Dim XL_WS1 As Excel.Worksheet = XL_WB.Worksheets(1)
The above code used to work, but now it gives me the error...I recently updated my Office from 2003 to 2010. How can I fix it?
script on various Operating Systems like Windows2000Professional,Windows2000Server, WindowsXPProfessional. Having exactly the sameconfiguration, on some machines it works absolutely fine and on some itgives following error.
Error : WSDLReader:Loading of the WSDL file failed. HRESULT=0x80040154: Class not registered.
Code : 80020009
[code].....
i have added a winsock control to my program. I know that vb 2008 dosent really support winsock no more but its needed for my project.Anyways i have form1 with a button that does "form2.show"This works as it should and opens form2 but when i add a winsock control to form2 then i get this error when i click the button to show form2
"An error occurred creating the form. See Exception.InnerException for details. The error is: Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))"
I dont get it, there are no classes apart from the form class.
Just finished reading a book on visual basic "Imports System.IO" and "FtpWebRequest". I double checks this code and tripple checked it but I can't seem to find anything wrong with it, bare in mind I did write it from scratch with help from the book so maybe its full of mistakes.[code]
View 2 RepliesI am developing a tool to get all elements of a web page (images, links etc...) and I am having a small problem with the Download button. I click it, and becuase we use a proxy at school no matter what I try it will always throw the error: "The remote server returned an error - (407) Proxy Authentification Required"How do I detect that the user is using a proxyAnd then if so, authenticate with it so that I can download the file?
View 4 Replies
