I am creating a application in VB.net. I've just managed to get a mssql connection going with the many people on this forum. I am now trying to establish a connection with Sybase server/db. Upon entering the username and password from my application front end, I get the following message:
[Code]...
I am creating a application in VB.net. I've just managed to get a mssql connection going with the rom many people on this forum. I am now trying to establish a connection with Sybase server/db. Upon entering the username and password from my application front end, I get the following message:
View 1 RepliesI cannot seem to figure out why VB keep throwing me this exception but here is the code
[Code]...
error details :"IErrorInfo.GetDescription failed with E_FAIL(0x80004005)."on googling i found that it is b'cse of key word
Private Sub Butn1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim CrewCri As String = Replace(Me.cbo_enroll.Text, "'", "")
Dim ExPeriOd As Integer = Me.cbo_extractlimiter.Text
Dim socT As String = Me.cbo_sections.Text
[code]....
I've spent a substantial amount of time trying to figure this out, but I keep getting the same error
A first chance exception of type 'System.Data.OleDb.OleDbException' occurred in System.Data.dll
A first chance exception of type 'System.NullReferenceException' occurred in project1.exe
This happens when I try to use the DataReader.my code is
Public Function Identification() As List(Of Integer)
Dim returnIndex As New List(Of Integer)
Dim dbCount As String = "SELECT Bookingid FROM bookdetail WHERE Date =" & getCurrentTimeString() & " 12:00:00 a.m."
Dim count As Integer = 0
[code]....
I created a button (Next) to navigate in a Table called CHAPTERS; My problem is that the button work Two, and sometimes three times. After that I get [Not specified error]. [Code]
View 2 Repliesi need to clear this error
A first chance exception of type 'System.Data.OleDb.OleDbException' occurred in System.Data.dll
This is driving me mad! This is my code and I have attached my parameters below with my error. What on earth is wrong.
[Code]...
During Runtime when it tries to open the connection it throws up this error.System.Data.OleDb.OleDbException was unhandled'
View 9 RepliesI'm getting some troubles to add data in a access data base with vb.net applicaion. it shows me the exception System.data.OleDb.OleDbException. my code:
[Code]...
1.[OleDbException (0x80004005): Not a valid file name.]
2.what is exception stack trace?
i'm getting an error wen i click "ok" for my password. here is the error that i'm getting: OleDbException was unhandled 'D:Microsoft Visual Studio 2010ProjectsFor My DaughterFor My DaughterFor My Daughter.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
[Code]...
I have been trying my hand at this for some days now and just cant get anything to work. Below is the code im currently using to delete a row from a database table, the problem when trying to build the project line 5 is giving this error about the value con" Value of type String cannot be converted to 'System.Data.OleDb.OleDbConnection' "
Dim con As String = "Provider=Microsoft.Jet.OLEDB.4.0;" & "Data Source=Customers.mdb"
Dim cnn As New OleDb.OleDbConnection(con)
cnn.Open()
[CODE]...
I have also tried using this code below, but to no success. Im basically just looking for something rock soild that i can use to accomplish this task. Been stuck on this for quite a while now.
CustDetailsTableAdapter1.Connection.Open()
Me.CustDetailsTableAdapter1.Delete(txtDelCustN.Text, txtDelCustSname.Text, txtDelCustTel.Text, txtDelCustAddr.Text)
CustDetailsTableAdapter1.Connection.Close()
Why I am getting the following error:
Error: "ExecuteReader" is not a member of 'System.Data.OleDb.OleDbConnection'.
The following is the
Private Sub txtSearch_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtSearch.TextChanged
Dim MyReader As OleDbDataReader
If txtSearch.Text <> "" Then
[code]....
I have a windows service written in .NET 2.0 that will run every 5 minutes and executes bunch oracle SQL/PLSQL scripts based on time/validation, it throws the above said error some times against some SQLs, the same SQLs run fine at later point without any error, I have no idea what is going on with the app. I am not sure if this has any thing to do with oracle connection pool as I am properly closing the connections after every SQL execution.
Exception:
System.Exception: Unexpected return code: 1 at System.Data.OracleClient.DBObjectPool.GetObject(Object owningObject, Boolean& isInTransaction) at System.Data.OracleClient.OracleConnectionPoolManager.GetPooledConnection(String encryptedConnectionString,
[CODE]............................
I am working on a windows application in vb.net 2005 and it needs to connect to the SQL Server database. In this example I testing if the connection is able to open properly:
[Code]...
Is it something dealing with the permissions set with the database server or something? I am new at .NET programming and I have been spinning my wheels on this for the past couple of days and I am at a loss. From what I research, this error should only occur if I was creating a web program, but I am not. It is a windows application.
I have been programming vba for some time and am now starting VB.NET. I need to connect to an existing access db file (access 2003). I downloaded VS2010 and found an example on the net. Here is most of the code:
Imports System.Data.OleDb
Public Class Form1 Inherits System.Windows.Forms.Form
Dim cn As OleDbConnection
Dim cmd As OleDbCommand
get the argument for the desktop of the user
I am getting this error message:
1 End of Statement Expected
I have tried to add a reference to System.Data.OleDb but it doesn't appear in the add reference box. System.Data.OleDb is checked in the Imported namespaces window. I have tried changing the .NET Framework but, no help.
i have bounded my listbox to a dataset the result is system.data.dataview not name of all my students. below is my code.
con = New OleDbConnection("PROVIDER=microsoft.jet.oledb.4.0;data source=d:
redata.mdb")
con.Open()
[code].....
Question: How do I programmatically determine which provider to use (Microsoft.Jet.OLEDB.4.0 vs Microsoft.ACE.OLEDB.12.0) when my app runs as a 32-bit process on a machine with Office x64 installed?
I'm developing a VB.net WinForms app in VS 2010 and targeting both x86 and x64.The app processes data from xls, xlsx, mdb and accdb files using System.Data.OleDb:Dim oConn As OleDbConnection = New OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;Data Source=...")
The x64 version of the program works as expected. The x86 version works as expected on a system with Office x86.When I run the x86 version on a machine with Office 2010 x64, I get the following exception when trying to open a connection:
The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.I believe this is because I'm running Office 2010 x64 so the x86 data access components are not installed.I can get it to work for Office 2003 files (*.mdb and *.xls) by changing the provider to Microsoft.Jet.OLEDB.4.0.
How do I figure out which provider to use when running as a 32-bit process on a machine with Office x64 installed?Ideally, I'd like a function:If ProviderIsAvailableFor("Microsoft.ACE.OLEDB.12.0") Then
Else If ProviderIsAvailableFor("Microsoft.JET.OLEDB.4.0") Then
I'm trying to updatesome records, currently my table is blank apart from the user id which is correct. but i get the error below.
My UserSettings table is as follows
ID is a Integer
MonthID is a Integer
YearID is a Integer
UserName is a string
Balance is a Integer
PhotoAddress is a string
GameSpeed is a Integer
This is my code and below that is my error in my ErrorTXT box.
[CODE]...........................
In a Windows Forms Application, since updating to VS2010 SP1 I get the following error in the VS IDE either:when attempting to a open windows form in the designer; orwhen attempting to run the application in the IDE The application and solution builds OK in the compiler. The error message is:Inner exception: "Error HRESULT E_FAIL has been returned from a call to a COM component." System.InvalidOperationException was unhandled Message=An error occurred creating the form. See Exception.InnerException for details. The error is: Error HRESULT E_FAIL has been returned from a call to a COM component.
[Code]...
i have create a setup file with inno software including interop.MessengerAPI.dll of chatting application(with windows live messenger).I have created a setup file with inno of that chatting application.but installed that setup it is work in only my pc it is not work in anather
[Code]...
i have create simple chat application with windows live messenger.I have give reference of essengerAPI type Library.then it works.after creating a setup file with inno software including interop.MessengerAPI.dll of chatting application(with windows live messenger).Install that setup on anather machine then following errors are generates. ( Error HRESULT E_FAIL has been returned from a call to a COM Component).How to avoid or remove this error.?The chatting is not done in windows live messenger.I have give the anather reference ie, Interop.MessengerAPI.dll but same errors will be generates.Interop.MessengerAPI.dll it is supported in windows xp or not?
View 1 RepliesI prepared simple WebSite with e.g. one button.Next after closing the project, I opened it again - and on the form I have instead of button object with information:"Error Creating Control - Button1Error HRESULT E_FAIL has been returned from a call to COM component"After start the WebSite I can see the button every time, problem is only in the design mode.The same situation I have with other WebSite projects
View 6 Repliesi am trying to connect to an MS Access database and I am getting an erro message on the following line of
searchtable_command = New SqlClient.SqlCommand(searchtable_string, testsearch_connection)
Error:'System.Data.Odbc.OdbcConnection' cannot be converted to 'System.Data.SqlClient.SqlConnection'.
Here my connection string:
Dim testsearch_connection As New Odbc.OdbcConnection("Provider=MSDASQL;Driver={Microsoft Access Driver (*.mdb)};Dbq=C:CesarAccessdatabase.mdb;Uid=admin;Pwd=;")
What am I missing?
I am new to Visual Basic.I am taking How to Program Visual basic 2010 by Deitel.I did the project Additin.vb.When I ran the program I got several error messages.[code]The System cannot find the file specified.I am using Visual studio 2010 Professionial.
View 2 Repliesthis application for computing the gcd by using extended euclidean but it give me just the value for first iteration but i need the final values of x2 y2 a
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim x1 As Integer
Dim x2 As Integer
Dim y1 As Integer
[code]....
I have a project that up until recently has been working fine. It sends an email message to a user once a file has been successfully uploaded, registered and/or approved to use the website. It is written in VB.NET framework 1.1, running ASP.NET on a Windows 2003 server SE sp2.
First the code
Public Sub EmailAfterRegister(ByVal sEmail As String, ByVal sUser As String)
Try
[code]....
This has worked for over one or two years. Today I realized upon testing I get the following error:The procedure entry point IstrcmpiI could not be located in the dynamic link library MSDART.DLL.Upon some research I found that maybe I needed to install MDAC 2.8, which i downloaded and installed today, however i still get the same error. I have had my communications and network admins check traffic and connectivity to the smtp server and all is working fine. Yet I still get the error.
I try to install Visual Basic 4-32bit on Vista Business but I get an error message 'VBCustom_Controls_Actions_Reg_Graph was unable to register itself in the system registry' ; is there a way to get around it ?
View 1 RepliesI created a simple program which basically launches programs installed on 32-bit system in the C:Program Files directory. I purposely put an .exe line of code in the compiler but that .exe wasn't installed on the system, I was expecting for an error when I tried to click the launch button and I did. NOTE: I already have a beginning If statement and that program is actually installed in the system, works perfectly no errors appearing.
ElseIf lstMultimedia.SelectedItem = "HyperCam" Then Process.Start("C:Program FilesHyperCam 2HyCam2.exe") 'this program doesn't exist in the system"
When the error appeared I looked at it in detail and found it was a system.componentmodel.win32exception type of error, I'm guessing that means a file doesn't exist in the directory I specified therefore the program displays an error.Now what I want to do is display a message box saying along the lines "This program cannot be found in your system" or something like that. But I don't know what the actual syntax/code for it, so far from thinking I have this.
Else : lstMultimedia.SelectedItem = 'no idea what to put here Then MessageBox.Show("This application cannot be found in your system or is installed in a different directory", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
End If
