I am having problem with the connection between an access database and crystal report. I created a crystal report by using wizard, all working go, but when I run the program in another computer am getting some error on path..wrong path for the database. So I need to find a way to connect database with the crystal report using a relative path...
View 1 Repliesi have done my application that uses crystal report and access database. I try to publish the application but when install on client machine, it wont work. the access database wont load and so the reports. What should i do?
View 9 Repliesi am using Access 2003 and vs2005,i am trying to add data to my crystal report from my access database,ok. So to do this i followed these steps: Now after all these steps,how to add the column names of the table "Table1" in my crystal report?
View 11 RepliesI am trying to build a setup file which will install my vb.net application with database and crystal report files to the client.
1.) I created my vb.net application in release mode.
2.) I created new setup project and added my vb.net application project in that solution.
3.) Also added the primary output in application folder
4.) [dun know how to add database so] created app_data folder inside the application folder and added the database file manually from add->file
5.) [dun know how to add crystal reports so] created reports folder inside the application folder and added the reports manually from add->file
6.) Build solution.
7.) Tried deploying in client machine.
8.) Application runs fine and works great. But crystal report files doesn't. When i try to open crystal report some long error messages comes in my way.
So I would like to know is the way i am doing to add the database file and crystal report files correct? how can i make crystal reports work in client machine?
I'm trying to use crystal reports in my database that i have made using vb 2010 and access 07, I'm trying to make a new crystal report in vb, have gone add new item, crystal report, etc but when i go to specify the new connection using the Microsoft office 12.0 access database engine )LE DB provider i keep getting a catastrophic failure error 0x8000fff?
View 2 RepliesI am using crystal report (procedure bind) which is not releasing connection when I exit from report. I am passing parameter to crystal as :
[Code]...
Which closes connection in UI but not releasing connection of crystal report.
I m using .net , I create some temporary tables at run time, how to print these table data thru crystal report
View 1 RepliesI have a Crystal Report that I am trying to access thru my VB.Net app. My problem is that I keep getting a "Database Logon" prompt (see screenshot). My code is below and I think I might have more than I actually need. I created the report from with the VS 2008 IDE.
Private Sub rptSingleWorkOrder()
Try
strSQL = "Select A.productName, " & _
"A.productDesc, " & _
[code]....
By the way, this code runs cleanly completely thru from the time the procedure is called until it exits.
how to make a crystal report in Vb.net using ms access as your back.end The purpose for this is about my project i think it's better to use a crystal report rather than to command another application for viewing your file right? ^_^
View 1 RepliesAnyone who give me a reference how to query the sql to SAP crystal report?
View 2 RepliesIam workin wid crystal reports have a problem i jus want to create a crystal report dynamically not by using crystal report wizard rather by using a blank crystal report and connecting to the database server and generating the report from the database manually....
View 1 RepliesI have to create a report with crystal reports in my application.my reports is based on a table in my database.As I've seen in the crystal reports designer, I have to add database to the report, and then I can pick the table and fileds that I need in my report.This is a quick and good when I use only one database type (for example Oracle or SQL Server)My questions are:How can I use the same report when my app is on two databases types? (Part of the customers I have use SQL Server, and part of them use Oracle DB)?
View 6 RepliesI have my crystal reports file accessing data from msaccess database.now while loading report i need to pass the logon info of the msaccess database along with the database name from vb.net.
[Code]...
My IDE is MS Visual Studio 2008.I just want to ask how can I get the result of a store procedure from MS Access using VB.Net and use the result in a Crystal Report.
I have a Windows Application Project that requires this function.
i just want to ask if you know any links regarding Crystal Report Tutorial, Or Video Tutorial of it that will teach on how to create a Crystal Report. If someone who can teach me on how to create it then it would really be fine for me.. Im looking for hard coding not just using the connection properties. I want to know on how to connect the crystal report to a database and gets all the data that I need and displays it. Designing the crystal report. Using TSQL if possible.
View 4 RepliesI am developing a vb.net windows application with crystal report and ms access. My database is stored in bin folder. I cannot bind database to report after deployment. How can I set the database location in report?
View 3 Repliesi just want to display data's from mysql database to crystalreport and i need codings
View 1 RepliesI have the following code.
Private Sub genWorkOrderCompForOneCustomer()
If customerNameComboBox.Text = "Please Select a Customer" Then
MessageBox.Show("Please select a customer to create a report for.", "Error",
[Code]....
When I run the the application I am not getting the current information from the sql database until I hit the refresh button and enter the parameter. I would like the information to be up to date when first loading the application.
I want to be able to programmatically add or remove database fields in my crystal report.I am familiar with programmatically working to parameters but not with database fields, I just can figure out how to programmatically do what you do in the Database Expert.
View 1 Repliesi want to put my images saved as byte from the database to crystal reports.
View 3 Replieshow to get the updated database data and print into crystal report using VB.net?
Dim rpt As New CrystalReport1()
Dim myConnection As SqlConnection
Dim MyCommand As New SqlCommand()
[Code].....
dynamically passing image to crystal report from a disk in vb.net 2005
View 1 Repliesi am using a local database i.e,the sql server express that comes with the vs2005,dont have any sql server additonally installed in my pc.
whice creating a crystal report,first this comes:
on clicking next,this comes:
then i selected and click next,then this comes:
but it did not show the database(Database1.mdf) which i created in my local database.
then how to create the crystal report when i am using a local sql server express database?
which options to select from the images that i showed above?
I'm using visual studio 2005 to develop a form with a combobox passing a value into the parameter of an embedded crystal report. Why it keeps prompting me for a database login every single time you try to run the report with a different combobox selection.
Here is my code:
private Sub Form1_load...
Dim ConnName As String
Dim ServerName As String
Dim DBName As String
Dim user As String
Dim pass As String
[Code] .....
I looked at this previous posting [URL]. I couldn't find where a CMC was to disable the prompt.
I have few crystal 10 reports with default to a server & database during crystal design time (server=SRV1, DB=Pub1). And, i calling these report from VB. net application with a config.ini define my server & DB . Recently,i hv clone the same reports but extract from different server & Database name (Server=Srv2,DB=Pub2, the tables & fields are still same ) i have created a config.ini which contain my server, database, uid & pwd. And, when i execute these cloned report , they still point back to the origin server which was server=SRV1, DB=Pub1.
My coding :-
Imports CrystalDecisions.Shared
Imports CrystalDecisions.CrystalReports.Engine
Private Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs)
[Code].....
I am using VB.Net and crystal Report in VS2008. On Crystal Report I have a database(SQL20005) Column "Address".
I have used "Can Grow" option for that Column to change. But it resizes Vertically. I want to change its Width as Address have different data.
i am semester 2 in the "system information", as usual just like in semester 1, this hardcore lecturer just has some way to make us difficult he is giving us a one semester long assignment, and as you probably can see.i got mysql as my database to making a hotel system application.
1.now i am stuck with how to connect "crystal report" with mysql database table??
2.after connected, how shoud i display it?.
delete a record in a database table in crystal report, after the report had been view from the new page and when the page is close.
the report is done in vs2008 c#.
I have created a data source connection to an access db by using the wizard in vs2008. I have then used this as a data source for crystal reports. My user would like to put the database on a network and reference it there. Is there a way to set a new path for this data source during runtime?
View 4 RepliesI have some Crystal Reports connecting to a Sql Server db that I would like to detect whether the connection is trusted or whether I need to supply the log on info (reports are not supplied by me so I can't control the connect method). If I just blindly supply login credentials, it won't connect if it is a trusted connection.The following does not work:
oRpt = oCR.OpenReport("C:MyReport.rpt")
if oRpt.Database.Tables(1).ConnectionProperties.Item("Integrated Security") = True then
'trusted connection[code]....
It gives the following error:Operator '=' is not defined for type 'IConnectionProperty' and type 'Boolean'.
I cannot find how create a construct in vb.net for IConnectionProperty. I can't find any documents from Crystal that explain it.I am using Crystal Reports XI - Developer