Control A Virtual Memory?

Sep 4, 2009

I have created a WFA that has 5 projects in it. One of the projects runs against 600 + servers and queries each server for local administrator accounts and then dumps that into an excel file. It will also check to see if the account that is in a local administrator group is disabled in AD. The problem that I have is that when I run the particular project I will run out of virtual memory. I have 4 gig on my computer. Is there a way to control this?[code]...

View 8 Replies


ADVERTISEMENT

How To Get Info About Total / Available Virtual Memory

Oct 26, 2011

I still have one more problem getting total/available virtual memory.
Code:
Select Case My.Computer.Info.TotalVirtualMemory
Case Is >= 1073741824
GetRAMInfo += FormatNumber(My.Computer.Info.TotalVirtualMemory / 1073741824, 0) + " GB" + vbNewLine
Case 1048576 To 1073741823
[Code] .....

For example, now Windows System Information returns:
Total Virtual Memory = 15.8 GB
Available Virtual Memory = 5.52 GB
While the above code returns:
Virtual Memory: 8,191 GB free of 8,192 GB
(I also use the same above code for My.Computer.Info.AvailableVirtualMemory)

View 4 Replies

IDE :: Out Of Virtual Memory While Writing (not Debugging)

Jun 15, 2009

I'm editing some code and moving stuff around doing a lot of cut'n'paste while writing and the intelli-sense slows to a grinding stall then eventually I get a message from my OS saying that I'm low on Virtual Memory and I haven't even run the compiler yet, still only in the IDE. ??? I 'unchecked' the 'enable Visual Studio hosting process' on the properties->Debug tab when this happened before and now I don't know what to do because VB won't run at all for more than half an hour making writing impossible...

View 1 Replies

Virtual Mode In DataRepeater Control / How To Update Data Changes

Feb 25, 2011

How do i make sure that the changes "done" by a user interacting with a DataRepeater control are reflected in the corresponding database source table? I have used DataRepeater in VirtualMode, do I have to supply my own code that will "actually" make corresponding changes to the actual tables, or is there a way of "configuring" or "binding" the controls on the DataRepeater to the "dataSet" so that the changes made by the user are reflected automatically in the underlying table? Whatever I have tried so far has yielded no results; whenever i edit the data on the control, the actual data is not updated. I attach a file showing the only events under which i have put some code: Load event of the Windows form, and the ItemValueNeeded event of the Repeater Control.

View 4 Replies

Force A Commit On The Current Row From Within A Virtual Unbound DataGridView's Edit Control Event Handler?

Sep 8, 2011

Using the walkthrough from [URL], I implemented a DatagridView in virtual mode, totally unbound, in VB 10 Express (we are talking WinForms).

I understand that CommitEdit (DataGridViewDataErrorContexts.Commit) commits the current cell's contents to the data cache.

The example uses row-level commit, i.e. it pushes the values into a row buffer until the current row is left. Only then the row is added to (or updated in) the data store. That's exactly what I do, too.

Question -- how can I commit the current row programmatically without leaving it? (I want to commit the whole row, not just the current cell.)

If the user leaves the row, there is a RowValidating, RowValidated, RowEnter event sequence where the datastore update is taken care of. So one idea (currently my only one) was to simply re-set CurrentCell to Nothing, for example.

But I cannot just set the DataGridView's CurrentCell property to Nothing (or any cell outside of the current row) since I want to commit from within an event handler of a custom edit control created by a custom column, and I see an System.InvalidOperationException exception when setting CurrentCell there.

In fact, it is a tiny button right to a combo box, i.e. I create a DataGridViewComboBoxCell descendant which is a DataGridViewComboBoxColumn descendant's edit control. My special ComboBox cell adds a tiny button which should commit the current row. Unfortunately, that button's _Click event handler cannot change CurrentCell since DetachEditingControl throws the exception then.

Obviously, I must delay the CurrentCell re-assignment until the whole _Click event has been processed. Or what? How would I do that -- register a custom Windows message, SendMessage that one to me, and override the windows procedure of the form so it re-sets CurrentCell when this message is received? (Hello?)

There should be a rather easy way to let DataGridView commit all changes by firing the events that I handle to perform the datastore update, no?

View 1 Replies

Tab Control's Memory / How Much Each Tab Is Using As If Each Tab Was Its Own Form

Aug 28, 2009

currently i have a tab control. i want to make a task bar like program to tell me how much each tab is using as if each tab was its own form

View 5 Replies

VS 2010 Chart Control In Memory Stream?

Mar 29, 2011

is this possible to do in memory (so i can get rid of any disk IO)?:

If File.Exists("c:MyImage.png") Then
File.Delete("c:MyImage.png")
End If

[Code]....

This above code works great the first time then errors out on any successive attempts after that with the file being used by another process at the File.Delete line. The image is being generated for use as a mail attachment and i've only ever done it via a phyical file on the disk.

View 1 Replies

VS 2010 Webbrowser Control Has Memory Leak

Dec 16, 2011

I have a simple app that has a listbox of URL's.I loop through these url's and display them in a webbrowser control.Ive noticed that on each page load the memory usage goes up from 5-10 megs, and will no go down. Ive researched a TON of solutions online and none seem to help at all.Do any of the pro's here know how to fix this memory issue in a webbrowser control?

View 19 Replies

WPF User Control Is Causing Out Of Memory Exception?

Mar 8, 2010

I have created a windows form based application and I want the form to add a user specified amount of user controls (with textboxes) on to a panel. The user can then click some button and the controls on this panel are cleared and new ones are added. The user does something and the process is repeated. Now, I wanted these textboxes to support spell checking and looked all over for a free solution.

WPF textboxes support spell checking where the ones in regular win forms do not. I thought I would be able to use these WPF textboxes by adding them to an ElementHost object which is, in turn, within a panel. This panel would be a user control.

So, in my application, I would be able to add instances of these user controls onto the form and make use of .NET's spell checking goodness. This actually worked but after using the application for a while, found that the application would eventually freeze on me due to out of memory errors. I have pinpointed the memory errors to these WPF controls since this problem does not happen with normal textboxes.

When the window is opened and the number of controls is specified, this is pretty much how the controls are added:

Dim xOffset As Integer = 0
For i As Integer = 0 To theNumber
Dim myUserControl As New SpecialUserControl()

[Code].....

There are a lot of results on the internet when I tried to find a solution and I'm thinking that the problem I am having is due to the fact that the WPF control is not going away even after clearing the panel. Following this conclusion, I have tried different solutions regarding disposing these controls or setting them to nothing but the memory problem keeps occurring.

View 1 Replies

Create The Control Runtime And In The Memory And Not Showing Anything In The Form?

Jun 8, 2010

I wanna to load a web page and login.I know how to do this with a web browser control but:I wanna to create the control runtime and in the memory and not showing anything in the form.I wanna to load many pages in the memory and extract my information needed without anything to see by user.

View 1 Replies

Loading HTML Content Into A WebBrowser Control From Memory?

Oct 4, 2005

WebBrowser Example.zip IntroductionBecause the WebBrowser control that we use in .NET is a COM control, not all of its uses are straightforward and some of them (even those which seem like they should be easy) require that we dip into our Interop toolbox in order to properly implement them.

A perfect example of this is loading HTML content into the WebBrowser from memory, rather than a file or a URL. Anyone who's ever used the WebBrowser control before is familiar with the Navigate2 method, which tells the control to load content from a URL (or path to a file). Loading HTML content from memory, however, is a rather elusive practice because of the many steps involved in making it work.

MSHTML.HTMLDocumentYou might notice that the WebBrowser control exposes a "document" property. The object returned by this property can be coerced to the type of "mshtml.HTMLDocument" (you must add a reference to MSHTML to your project in order to make this work) as follows:

Code:Dim clsDocument As mshtml.HTMLDocument = CType(WebBrowser.Document, mshtml.HTMLDocument)

(NOTE: You will have to add a reference to the COM library MSHTML to your project to make this compile)

Once we create an instance of HTMLDocument, a whole new world opens up to us, providing all sorts of DOM access to the content of any given Web page.

If we were to create our own HTMLDocument object from memory, we could use the "write" method to write HTML content to the document from a string variable, like this:

Code:'initialize the document object within the HTMLDocument class... clsDocument.close() clsDocument.open("about:blank")

'write the HTML to the document using the MSHTML "write" method... Dim clsHTML() As Object = {sHTML} m_clsDocument.write(clsHTML) clsHTML= Nothing

WebBrowser Control ImplementationUsing the HTMLDocument returned by the "document" property of the WebBrowser control, however, is not as straight-forward. Because of the way that this object is created and initialized in memory (by the COM WebBrowser control), the "write" method fails when called as above. In order to write content to the HTMLDocument exposed by the WebBrowser control, we must first marshal the string value to a memory space that is compatible with COM. Once the string is properly marshalled, the COM interface IPersistStreamInit (implemented by the HTMLDocument class) must be used to pass the value into the object.

Interop DeclarationsIn order to pull all of this off, we must declare several Interop pieces, including an enumeration, a function, and two interfaces. The declarations for these pieces are as follows:

[Code]....

View 10 Replies

User Control - Failed To Create Component (Out Of Memory)

Nov 3, 2011

I am working on a user control. Embedded in my user control is another user control. All of a sudden while programming some simple stuff I get an "out of memory error message". I can no longer load my project (after reboots etc.). I start a new project, copy the control.vb files into a new project folder.. add then add the control to the new project. Ican view the design and the code of the control. When I attempt to drag the control onto another control in the same project I get an error message
"Failed to create component... 'system.outofmemoryexception. Out of memory".

View 8 Replies

Resize An Image (jpg,gif,png) To Avoid Out Of Memory Error In Picturebox Control On .NETCF 2.0

Sep 15, 2009

I'm searching for a solution to resize image(jpg) being passed in from an array in Picturebox Control on .NETCF 2.0 in VB.NET without resorting to using the opennetcf library, is it possible?

View 1 Replies

VS 2008 OpenFileDialog Control That Will Read A Text File Into Memory - When Select All Files *.* It Does Not Re Appear?

Apr 24, 2012

I am writing an application that will use a OpenFileDialog control that will read a text file into memory and later process it.

I do have the following filter: Text files (*.txt)|*.txt|CSV files (*.csv)|*.csv|Spaced Text files (*.prn)|*.prn|All files (*.*)|*.*"

When I navigate to my test folder that contains a single .txt file, I see that file. When I change the filter to *.cvs that files goes disappears because it has a .txt extension. That is good. But when I select All files *.* it does not re appear? Why and how do I make it appear.

View 5 Replies

Loading An Image From A Jpeg That Exists In Memory (but Not On Disk) Using Direct Memory Access

Nov 5, 2009

In VB 2005, I am calling a C++ DLL function that returns the address in memory and size in bytes of a jpeg image. How can I load that jpeg image directly from memory into a picture box in my VB form? I cannot afford to save it to disk first.

View 10 Replies

Attempted To Read Or Write Protected Memory / Often An Indication That Other Memory Is Corrupt

May 22, 2007

Im getting a problem with one of my programs I have made in visual basic.NET where it gives me a memory error when i debug the program in the IDE. the exact error is this: "Attempted to read or write protected memory. This is often an indication that other memory is corrupt". My program basically has a few forms with text fields on that get their text values from an access database on the same hard drive. Im wondering if im doing something wrong because my program just seems to eat up memory whenever it does anything. For example I have one form that has a combobox on it and when you change the drop down list selection it retreives a few strings from the database and puts them into the relevant text boxes, if you keep changing the selection then the memory usage (in task manager) just keeps going up and up. occasionally I get the error mentioned above when debugging but in my built version of the program it throws an exception everytime the memory usage gets past 49K.

Also I noticed when debugging in the "immediate window" frame I get the following message often:A first chance exception of type 'System. Invalid OperationException' occurred in System.Data.dll...Do I need to somehow be "releasing" the memory that is used to gather data once it becomes redundant?

View 12 Replies

Attempted To Read Or Write Protected Memory. This Is Often An Indication That Other Memory Is Corrupt

Nov 24, 2011

I am using the following code

This error occurs :

Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.

Public Class FormRegEnumValue

[CODE]......................

View 2 Replies

Attempted To Read Or Write Protected Memory. This Is Often An Indication That Other Memory Is Corrupt?

Feb 1, 2009

QuoteSystem.AccessViolationException was unhandled Message="Attempted to read or write protected memory. This is often an indication that other memory is corrupt." Source="System.Windows.Forms"

Im designing a web browser and i continue to receive this error after going to about 3 websites it crashes with that error.

View 6 Replies

Necessary To Detach Event Handlers To Ensure That Memory Is Cleaned Up And That There Are Not Memory Leaks?

Jan 20, 2010

I have a BackgroundWorker object that I instantiated to perform a DB process on a background thread ansynchronously. I have event handlers for DoWork and RunWorkerCompleted. I can tell that the BackgroundWorker is disposing of itself because I added a message box into the Disposed event handler.Is it necessary to detach the event handlers to ensure that the memory is cleaned up and that there are not memory leaks?

View 1 Replies

Thread And Memory Leaks - Memory Usage Jumps About 1000k And It Never Goes Back Down

Apr 17, 2011

I've noticed that every time I start a new thread in my program, the memory usage jumps about 1000k and it never goes back down. I have ensured that the thread is no longer running, and only one instance of my worker thread is ever running at a time. I am using ThreadPool.QueueUserWorkItem and ASyncOperation to get stuff done. The program starts using a Sub Main in a module that uses STAThread; I read that using STAThread instead of MTAThread makes it impossible for the Garbage Collector to get in and consider objects for garbage collection. However, when I change the STAThread to an MTAThread, the WebBrowser control in my frmMain cannot be instantiated.

I get this exception:

Code: An unhandled exception of type 'System.Threading.ThreadStateException' occurred in System.Windows.Forms.dll

Additional information: ActiveX control '8856f961-340a-11d0-a96b-00c04fd705a2' cannot be instantiated because the current thread is not in a single-threaded apartment. I do threading with the WebBrowser control, so will using MTAThread fix my problem? If so, how should I partition my code so that the WebBrowser control won't be affected by the above exception? I call the thread repeatedly with a timer (although only one instance ever runs at a time), and my program's memory usage starts at about 5000k and can jump to 300,000k+ depending on many times the thread needs to be called.

View 6 Replies

2008 Express Edition: Attempted To Read Or Write Protected Memory, This Is Often An Indication That Other Memory Is Corrupt?

May 27, 2009

I cannot use Visual Basic 2008 at all. When I go to "new project" and choose "Windows Form Application" I get this error.I have tried multiple uninstall/reinstall with no result.A microsoft reply to this suggested that I needed: " .NET Framework 2.0 Service Pack 1 " I checked, and I did not have the .netframework 2.0 service Pack 1.
When I tried to download and install the above from Microsoft.com, the istaller said that "it was not allowsed" and I was not able to install the service pack 1.

I tried Uninstalling net framework 3.5, 3.0, 2.0 and then reinstalling .netframework 2.0 sevice pack 1; then reinstalling Visual basic 2008 express edition. At the reinstall of Visual basic 2008, .netframework 2.0 sevice pack 1 is unistalled by .net framework service pack 2.When I check the foruims for simiar problems, the formus are mostly for Visual basic 5.0, or other programs that I do not have.

Here is the programs I have installed:

Operating system: Windows XP
Microsoft .net framework 1.1
Microsoft .NET framwork 1.1 Hotfix(KB928366)
Microsoft .Net Framework 2.0 Service Pack 2

[code]....

All the security updates and hotfixes for Widows XP.

View 4 Replies

DirectoryEntry Memory Leak - Gets A Out Of Memory Error In The Last Catch Statement?

Jan 11, 2012

The follow code can be called about 6K times on the server it is run on then gets a out of memory error in the last catch statement. I don't see what is wrong with the code, it works well up until the out of memory..

Public Function AddUserToGroup(ByVal sSamAccountName As String, ByVal sGroupName As String) As Boolean
Try
Dim returnStatus As Boolean = True[code]......

View 3 Replies

Read Or Write Protected Memory Often An Indication That Other Memory Is Corrupt?

Feb 9, 2011

I have two forms, Form1 and Form2. Form2 has a button to show OpenFileDialog. I call Form2 from Form1 by a button. My startUp Form is Form1. When i start debugging, i press my Form1's button to show my Form2, it shows, but when i click On Form2's Button to show OpenFileDialog it is giving me exception that

"Attempted to read or write protected memory. This is often an indication that other memory is corrupt."

When i set my startup Form to Form2 and click Form2's Button to show OpenFileDialog then it shows!

View 13 Replies

VS 2010 "Out Of Memory" Error In Webbrowser Control

Mar 1, 2012

I was running VS2008 express and WinXP and everything was working great. I'm now running VS2010 Express and Win7 x64

My issue is that I am running a webbrowser control that is loading a page with scripts and I get a "Out of memory at line xxxx" and the page wont finish. I've tried it on XP and it works fine so it is a Win7 issue. I call it by the standard, wb.navigate("link.com") and it errors out. If I do a "process.start("link.com") it opens a new window and works great. If I open IE or firefox standalone, everything works great. It has something to do with my webbrowser so my question is how/why is the webbrowser different than the standard IE webbrowser?

I would try to load a new IE window, but I don't know how to pull and push data to a webbrowser outside of my app. My app does form manipulation in website to streamline manual processes for filling forms out.

View 6 Replies

Webbrowser Control - Memory Leak - HTTP Web Request Instead Of A Webbrowser?

Mar 18, 2011

i have created an app to load an access database into a datagridview, which contains web urls. When button is clicked it webbrowser1 navigates to each url and each webpages document.inertext is put into textbox. This all work fine but after a while the webbrowser navigation becomes increasingly slower.

For Each RW As DataGridViewRow In Me.DataGridView1.SelectedRows
'''''''''''#######cell values into strings ########''''''''''''''
If RW.Selected = True Then
Dim domain As String

[code]....

View 7 Replies

Form-printing Class Error - "Protected Memory Was Tried To Be Read Or Written. This Often Indicates That The Other Memory Is Damaged"?

Aug 3, 2010

I have a new problem with this same Form Printing project and I get exactly the same exception but from the different point of code:

line 538: d.PrintFunction(c, typePrint, mp, x, y, extendedHeight, ScanForChildControls)

The exception type is System.AccessViolationException and it says (after I translate it from my own language in which the message is given in my pc, into English):"Protected memory was tried to be read or written. This often indicates that the other memory is damaged"

View 1 Replies

"Attempted To Read Or Write Protected Memory. This Is Often An Indication That Other Memory Is Corrupt"

Aug 4, 2010

I am getting the following error: "Attempted to read or write protected memory. This is often an indication that other memory is corrupt". i am using interop service.

View 2 Replies

Memory Leak - After About 6000 Of 1,250,000 Images In ##X It Throws An "out Of Memory" Error

Feb 9, 2011

This code was put together for a one time run. It's purpose is to count all the pages in a group of images. After about 6000 of 1,250,000 images in ##X it throws an "out of memory" error. Besides it being thrown together for a one time run does anybody see anything obvious that could be causing the error?

CODE:

View 5 Replies

Get The IP Of A Virtual Server?

Aug 6, 2009

I am using the following function to return the primay ip address with out problem until I ran it on a virtual server. It returned the ip of the physical server not the virtual server.

Public Function fnGetIPAddress() As String
Dim IPAddress As String = My.Computer.Name
Try

[code]......

View 3 Replies

Make A Virtual Os With A Cmd

Jan 7, 2011

i want to make a custom CMD i can try it to make it in notepad and save it as a .bat file en then say, [Code]

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved