This long code runs only until 119. If you exceed to 119, it won't convert it to words. I know I can use the same method but the codes will be too long.
Dim a(19) As String
Dim b(10) As String
Dim c(5) As String
[Code]......
I am making a program, where the user enters 6 numbers in 6 different text boxes, and it displays the larger of those 6 numbers. But I also want to make it where if the user enters a string value (like S for instance) in the text boxes, it gives an message and says "please enter the numbers again" and the user gets to enter the 6 numbers again. But when I do try to do that, it gives an error message saying conversion from "w/e the user entered" to Double is not valid. If the user just enters the numbers, it works fine. However, I am trying to make it if the user does enter non numeric value, it gives a message window and the user can reenter the numbers again.
Here is my code Example
CODE:
This is where I am trying to use IsNumeric to show a message if a user does not enter a string so the user can renter the numbers again, but when the user does enter a string value (say in textbox 1) it gives me an error message saying conversion from "S" to 'double' is not valid.
CODE:
Then right here this is where I have my series of ifs statements, this part works fine, it displays the largest numbers of the 6 textboxes every time. Error free.
CODE:
And do this with variable number 2, 3, 4, 5.
I know there are easier ways to do these with arrays and stuff. But I am not there yet. I am still learning about ifs and stuff.
if I have Textbox1 to type numbers
and how to convert numbers to words in Textbox2 ?
like
1= one
2=two
23= twenty three
and so
how to do that ?
I'm trying to create a program that takes 7 numbers and converts them to Letters. To do this I have created a TextBox to enter the 7 digit number in , a CONVERT Button, and a LIST BOX to display the thousands of results. This is created using a Windows Application Form.
[Code]...
In short let's say i have a form with a text box and a label. I am going to insert a number for example "1365" in the text box and then in the forms label it'll output "one thousand three hundred sixty five".
View 4 Repliesability to send words and numbers to another computer using internet. (I would prefer if a server computer wasn't needed.)
View 1 Repliesi have a text boxt where i enter a number ;for ex if i entered 567 it should convert the number to 100056700
if no is 978 then it should b converted to 100097800
if no is 5678 thn it should be converted to 100567800 always there should be last 2 digits that are 0's
in sql server i dit it as
@DelershipID= 100000000
+ CONVERT(INT,(CONVERT(varchar(4),@DealershipID)
+ '00'))
I need to know how to do a web service conversion which will convert only three figured whole numbers into strings??
View 1 RepliesI have a string which was converted to a char array and stored in a stringcollection, how do I return the numerical value for the character in each string? How can I reverse this process, getting the character from the numerical value?
I know I could code a Select Case statement, but that would take a very long time as I need to cover every character a person could want to conceivably use in the English language, including punctuation. Is there already a method built into vb.net for doing this?
I currently have a list of words in a text file sorted in to alphabetical order and put into lower case, but I would like to be able to also display the line numbers on which these words are associated with.. but only one instance of.
For example,
"This is a random text
file that I
have just made
up this second"
[Code].....
As you can see above, I would like to show that "this" for example appears on line 1 and 4. Hopefully tabbed so that it keeps a nice look to it.
I've got 2 RTB one is for input of text and one is output.The output one needs to read the words from the input and display it alphabetically and with their line numbers.I have partly done it and it currently reads it but here is my problem When the words are outputted let say for example there are 2 words the same on the same line e.g the word 'you' appears twice on line one,at the moment its coming up like this
[Code]...
other than GML (Yoyogames.com Game Maker Language), I am new to the coding world. The only "major" project I have completed using VB is a computer calculator that exactly mimics the capabilities of Windows 7's calculator. Yesterday, I began a Chatbot program for my girlfriend. Lol. I have used the instr() function to answer most of the questions or answers which are typed into the textbox1. I find this extremely troublesome because when using the instr() function you cannot say instr(textbox1.
Public Class Form1
Dim fos As String = "Foster: "
Dim ash As String = "Ashley: "
[code].....
a user will enter a number, n, which ranges from 1 to 30. they will also enter a "P" or an "S" (sum or product). depending on which was selected, it will calculate the sum or product of the numbers from 1 to n.i'm having a conversion error on line 5 stating "Conversion from string "S" to type 'Double' is not valid." [code]
View 2 RepliesI'm creating a program in VB.net that does the following:At a high level I receive a file in email, put the attachment in a monitored folder, import the text file to excel, format the excel, and then email the excel file to a list of recipients.
Here is my plan:
Completed: Outlook VBA to monitor all incoming email for specific message. Once message is received drop attached .txt file in a specific network folder.
Completed: (VB.net) Monitor folder, when text file is added begin processing
Not Complete: (VB.net) Import text file to Excel
Not Complete: (VB.net) Format Excel Text file.(add in a row of data,format column headers with color/size, add some blank columns, add data validation to some of the blank columns that allow drop down selections)
Completed: (VB.net) Save file.
Completed: (VB.net) Send file to list of recipients.
Obviously the items above that are not complete are the bulk of the work, but I wanted to get some advice on what some of you think would be the best way to approach something like this. The import and formatting of the file are causing me some problems because I just can't decide what would be the most efficient way to do this.
The way stated above. Import to excel -> format Having a template excel that contains all of the formatting already done for me and attempting to transition the data to this document (no clue if/how I can do this). Is it even feasible? Have the template already created and then import the text file to a new excel file, then transition that data to the excel template?
Something I thought about, in terms of formatting the document, was to record a macro of me doing all of the formatting that I'm going to need and then attempt to convert that macro into my vb.net code, but I'm not sure if that will work. I will need to verify that the text file comes in the EXACT format every time correct?
Here's 2 questions that I hope someone can help me on. This is in VB.net. I keep on getting this error 'java.io.bufferedInputstream.count is not accessible in this context because it is 'Protected Friend'. Does anyone know how to fix this error?
The other errors i get are "Overload resolution failed because no accessible 'Val' accepts this number of arguments". I have listed below the code that I have coverted from Java. Where is my mistake?'the underlined areas are where it is giving me errors.
[Code]...i
I have six textboxes, and upon button press it randomly generates six numbers, one in eact text box e.g. [43] [85] [93] [1] [0] [17]..i create another six textboxes and at the same time allocate these numbers in ascending/descending numbers.I am not looking for any codes whatsoever, as i love the challenge of VB.Net.
View 2 RepliesIm trying to write a program that will do:
1.The average of the four numbers. This answer will be placed into a text box reserved for that value. This text box cannot be changed by the user.
2.The maximum and minimum values. These will be denoted by changing the color of the largest number green and the smallest number red.
3.The range of the numbers. The range is defined as the difference between the largest and smallest numbers. The range will be placed into its own text box, labeled as such. This text box cannot be changed by the user."
Im using visual studio 2008 and it has to be written in VB
So how would I use .next (random numbers) to randomly select something from a list of numbers but it can't repeat the number?I could do:
dim num as integer
dim r as new random
num = r.next(1,5)
if num = 1 then
elseif num = 2 then
etc.
That wouldn't work because it would repeat.If I donwload someone's game can I disect it in VS? :0 I tried going to open project, then I went to the folder and clicked open. It brought me inside of the folder so I tried to open the game but there is no form1 there. It says the games name then .exe in the explorer-like thing in the top right?Also, how would I have a value or something in a label and access it from a button.
Example:This is in a label.
Dim number as Integer
number = 0
Then in the button do
Label.number = 0
How would I do something like that? I want to use that a lot as I did in a different language.
I have a program that allows a user to input numbers from an inputbox and it displays the Total numbers entered, the sum of the numbers entered, and the average of the numbers entered. What I can not seem to find it how to have it display the largest number entered. The code I have so far is,
[Code]...
how can i add two excel sheets with numbers and the equal (similar)numbers to save once
View 1 RepliesI have just about completed a .NET project to write a program to randomly select numbers for a Bingo caller. Over the last month or so Ive learned a lot about .NET but heres something that I consider to be odd and maybe one of you guys can offer an opinion.
One of the features of calling Bingo in a small local club is that callers often use little sayings to accompany certain numbers, I expect youve all heard of (say) All the sixes, clickety click for 66 or 5 and 9 the Brighton line for 59 etc. My little program gives an option to incorporate these with a prompt for the caller that can be edited outside of the program. One of these conventional sayings is used when a number is reversed 12 followed by 21 or 45 followed by 54 for example, when the caller might call (say) 1 and 2, one dozen, number 12 And the other way round 2 and 1, twenty one.
So, I programmed in a bit of code to detect this and to over-ride whatever might otherwise have been the quote with And the other way round and set about testing it. Ive been through literally dozens of full 90 calls watching for the occurrence of a reversed number, spent a few hours doing it, and not once has it occurred which is to say the least, unusual.
So, Im wondering about the Rand Function, could it be that it isnt possible for a reversed number to be selected? Just so you know, I randomly pre-select the order of all 90 numbers, I fill each of the 90 elements of an array with a random number first checking that the number selected hasnt already been stored, if it has, I just get the next random number (and check that too of course), but I cant see how that could prevent reversed numbers being selected, especially in light of the fact that frequently it's not the 'next' number that's used.
am writing an system application for a company that must generate inquiry id and order id automatically. Whenever a customer makes a new inquiry or new order by clicking the add button, an automatic number should be displayed in the text box and when it's saved, it should be saved in the database access.
View 9 RepliesHow do you sort strings with numbers when you want numbers sorted based on their dimension?
View 19 RepliesSub five()
Dim i As Integer
For i = 1 To 14[code].....
I want the numbers that I was comparing similar numbers. I get equal numbers and ELSE giving all series.I like numbers 2 4 6 8 9 10
I would like to know how I can have an enumeration that has multiple values and can be passed to a function.
Example:
Public
Enum
ActionEnum
NoAction = 0
[code]....
I am working on an assignment that will display the forst 10 fibonacci numbers in sequence. However when my results are displayed, the numbers are all stacked on top of each other like this: 011235813213455. I have tried to play with it but i can't seem to get my numbeers to space out or even maybe have a comma "," betweeen each number.[code]
View 2 RepliesThe program must generate 6 unique random numbers but when I click display numbers sometimes it gives me 6 unique numbers and sometimes I get duplicate numbers. I will add the code I have so far.
Public Class frmMain
Private Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
[CODE]...
i have one more issues, and hope is the last for now. How can I limit a textboxe's input to only numerical with certain range of values (eg -10 to 10) and with that happening while I type in the values?
View 9 RepliesI'm trying to make a program that will calculate the sum of consecutive numbers between two given numbers. [code]
View 13 RepliesI'm using VB08. I've populated a listbox with numbers and I want to add all those numbers together and display the result in a Label. I've heard about using parse but I don't understand exactly how it works.
This is the code that I have that i think should work.
Dim lblTotal As Decimal
Dim sum As Double
For Each decAdded As Decimal In Me.lstRunningTotal.Items
sum += Double.Parse(decAdded)
Next
lblTotal = FormatCurrency(sum)
When I run it, nothing happens. My "For Each" statement I'm not sure if it's doing what I think it's doing. I can't believe I spent 6 hours banging my head against the wall but I finally got it figured out.
This is my revised code:
Dim sum As Decimal
For Each decAdded As Decimal In Me.lstRunningTotal.Items
sum += Decimal.Parse(decAdded)
Next
lbl_Total.Text = sum
Just some suttle changes made the difference