How to convert memorystream byte array to csv file. I have GetExport method that converts rpt file to excelformatted memorystream and then returns that as a byte array. Is there a way to convert this byte array to a csv file? Due to some reasons I can only pass this byte array back to calling function.
Public Function GetExport(ByVal reportID As ReportID) As Byte()
Dim byteArray As Byte() = Nothing
Using expRptDoc As ReportDocument = New ReportDocument()
Dim rptFileName As String = Server.MapPath(ReportCommand.GetXMLReportPath(reportID))
expRptDoc.Load(rptFileName)
[Code] .....
I am using IonicZip to compress video files and store in a blob field. I have the zip file created just need to convert it to a byte array. How is this done without writing to the harddrive?
I'm converting a stream of bytes from a network packet into a specific struct, and vice versa. For example, when converting a short back and forth, my method looks like this:
myShort = buf(0) + (buf(1) * 256) or the other direction: buf(0) = myShort mod 256 buf(1) = myShort 256
When it comes to a 4 byte integer, after some experimentation I found that converting from the byte array to integer is done this way:
I am working on a mini project that requires me to take a 8 byte hex string that I received from the Serial Port and convert it into a Byte Array and display it on the screen.An example of the string that I receive is 01050001FFFF8FFB
I am currently using the System.Text.ASCIIEncoding.ASCII.GetBytes(str) to help me achieve this. However I realised that if this does not support extended ASCII so whatever byte that is > 7F, I will not get the right value.My current code is as follows:
vb Private Sub SerialPort1_DataReceived(ByVal sender As Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) Handles SerialPort1.DataReceived Dim str As String
I have a hexadecimal value 07A5953EE7592CE8871EE287F9C0A5FBC2BB43695589D95E76A4A9D37019C8 Which I want to convert to a byte array. Is there a built in function in .NET 3.5 that will get the job done or will I need to write a function to loop through each pair in the string and convert it to its 8-bit integer equivalent?
I am needing to write data to a usb device. The USB device uses a byte array (DataArray() as byte) to store the data. How can I assign a struct object (myStruct(0)) to the byte array. I run into the error "Value of type byte cannot be converted to 1-dimensional array of byte" when I try to cast the struct as a byte.
I'm calling a Windows API that gives me a byte array which represents a unicode string - the problem is that if I call Text.Encoding.ASCII.Get String on it I just get the first letter of the string. The reason for this is that byte array has an empty byte between each character. I've verified that removing these empty bytes resolves the problem by just using a simple For loop to add the bytes that do have a value in into a new byte array, then calling Text.Encoding.ASCII.GetString on that and that gives me the full string I'm expecting.I'm just wondering if there is any easier way of getting the working string though without having to do a loop and create a new byte array etc?
I am trying to copy a byte array into a Class that is in a third party library
Dim usr As New RSI_USER_RECORD Dim ba(RSI_USER_RECORD.RSI_LEN_USER_REC - 1) As Byte 'populate ba here usr = ba 'how can I do this? Is this even possible?
Here is the definition of the class (from Reflector)
I have a reportviewer that I am rendering as a pdf into an in memory byte array. What I need to do is apply an owner and user password for the pdf. I have downloaded the adobe sdk and have scoured the Internet for examples to do this to no avail. with a VB.NET example that will apply the owner and user password for the pdf.
I'm trying to get a string from a byte array previously read from memory
i can get the string like this
dim mem as string= ASCIIEncoding.ASCII.GetString(memory) or dim mem as string= UTF8Encoding.UTF8.GetString(memory) but when i try to concatenate this with another string i get a strange result dim result as string = "this is you memory string " & mem & " problem string" no matter what comes after mem in the concatenation it seems like it is not there when in fact it is because when i try this (mem has two chars in it) dim result as string = "this is you memory string " & mem(0) & mem(1) & " problem string" problem string appears so what i assume is that there are some vbCrLf chars in the string after reading (or is it from the conversion?)
i do not know why data type image on ms sql is not working ! so i choose to use varchar(max) as my datatype to store images.. but i do now know how to load it on crystal report..
I have a structure in VB.NET that has a dynamic array of double as a parameter. I am passing an array of structure (GElement) to a C++ DLL. I tried converting my array of GElement into a block of unmanaged memory, it works in VB.NET but crashes in my C++ DLL. I get the same error just trying to simply pass an array of GElement to my DLL instead of a Intptr.
Here is the error 0xC0000005: Access violation reading location 0x00000004
Here is my function and structure in the DLL: void _stdcall TestGElement(GElement* ge,long& nbge){ nbge=5; } struct GElement { double Step2D; double Step3D ; [Code] .....
I know it is easier if the array inside the structure as an already defined constant size but that can't be the case here...
I have a filename(including it's path) in a string. Now i want to load this .csv file into memory stream. ex: Dim filename as string="C:UsersDesktopabc.csv"
I just converted the following code from c# to vb.net. It is functional and works correctly with my company's firmware/devices. My next challenge. Previous serialport code used much more readable structs which where then converted (after building a packet) into byte() automatically as part of the serialport encoding. (this is my understanding)How could I
1. morph byte arrays 'ToSocket' and 'ToMTP' below into structs and
2. convert into byte array for Socket.BeginSend(byte(),.....) to stream out to remote devices?
I don't know whether it is simple or not because i am new to programming. my requirement is : In my vb.net winform application, the filenames of the files present in "D:Project" willbe displayed in DataGridView1 control. Now I want to load these files one after another into memory stream buffer and add the headers("ID","Name","Class") to the content in the file. Then I want to save these files in "C:" with "_de" as suufix to the filename i.e.,sample_de.csv.
I am working on vb.net win form. My task is display the file names from a folder onto gridview control. when user clicks process button in my UI, all the file names present in gridview, the corresponding file has to be loaded onto memory stream buffer one after another and append the titles to the content of the file and save it in hard drive with _ed as a suffix to the file name.I am very basic programmer. I have done the following attempt and succeeded in displaying filenames onto gridview. But no idea of later part.
'Displaying files from a folder onto a gridview Dim inqueuePath As String = "C:UsersDesktopINQUEUE" Dim fileInfo() As String
I have a user interface app that allows you to drag/drop in files - and it turns them into HttpListener request POST's to another EXECUTABLE that I have running - let's call it BACKEND1. BACKEND1 will be running on a SERVER when this gets ready for production use. Lots and lots of users running the UI - all dragging in files - all getting POST'ed to BACKEND1 - with the file included as a memory stream in the POST. BACKEND1 responds to the UI with a "sequential" file number assigned to the file centrally on the server.
On the SERVER is also running another EXECUTABLE - let's call it BACKEND2. It's job is to work with the DRAG'd in files. Both BACKEND1 and BACKEND2 sit on the same SERVER. At the moment I am writing the memory stream to DISK in BACKEND1 - and POSTing the FILENAME to BACKEND2 for it to work on. Would it be better to not write the file in BACKEND1 but instead include it in the POST to BACKEND2 - where it can be written to DISK? Is having LARGE HTTP REQUEST's a burden when sent between two EXECUTABLES on the same machine?
My primary goal is to have a really available BACKEND1 talking the the UI instances running out in the world. I'm concerned that doing the file i/o in BACKEND1 is "expensive" - and I don't care about the performance of BACKEND2 as much. just looking for opinions. I guess ultimately I'll have to bench mark this myself in a production environment to get a real answer.
I have a function that accepts a string and generates an email attachment based on that string. It works fine for html pages, text documents, and so forth but I can not get it to generate a PDF file.
Code:
Public Sub SendMail _ ( _ ByVal strFrom As String _ [code]......
If I save the file attachment as Whatever.PDF i get the error that it was not encoded properly.I am using datadynamics active reports PDF exporter to generate the PDF
dim pdf as new datadynamics.activereports.export.pdf.pdfexport sendmail("from@", "to@", "test", "test", pdf.tostring, "pdf.pdf")
I think the problem is I am converting the PDF to a string, and then trying to convert it back to a PDF and attach it to the email but I am not 100% sure.
I am using iTextSharp with VB.Net to stamp images onto PDF documents. (Since this is not language specific I tagged for C#, too.)I have two applications using the process.The first uses the bytes from the memorystream to display the PDF documents online. This piece is working. The second uses the same function but instead saves the PDF to a file. This piece generates an invalid PDF.
I have seen some similar questions, but they are all creating a document initially and have a document object in the code. Their memory streams are corrupt from the outset. My code does not have a document object and my original memory stream opens fine.
Here is the place where I get the error: (I have to put the buffer from m into a new memory stream because the stamper in the fillPDF function defaults to closing the stream unless marked otherwise.)
Dim m As MemoryStream = PDFHelper.fillPDF(filename, Nothing, markers, "") Dim m2 As New MemoryStream(m.GetBuffer, 0, m.GetBuffer.Length) Dim f As FileStream = New FileStream("C: emp.pdf", FileMode.Create)
I have a user interface app that allows you to drag/drop in files - and it turns them into HttpListener request POST's to another EXECUTABLE that I have running - let's call it BACKEND1.BACKEND1 will be running on a SERVER when this gets ready for production use.Lots and lots of users running the UI - all dragging in files - all getting POST'ed to BACKEND1 - with the file included as a memory stream in the POST. BACKEND1 responds to the UI with a "sequential" file number assigned to the file centrally on the server.
On the SERVER is also running another EXECUTABLE - let's call it BACKEND2. It's job is to work with the DRAG'd in files.Both BACKEND1 and BACKEND2 sit on the same SERVER. At the moment I am writing the memory stream to DISK in BACKEND1 - and POSTing the FILENAME to BACKEND2 for it to work on.Would it be better to not write the file in BACKEND1 but instead include it in the POST to BACKEND2 - where it can be written to DISK?
Is having LARGE HTTP REQUEST's a burden when sent between two EXECUTABLES on the same machine?My primary goal is to have a really available BACKEND1 talking the the UI instances running out in the world. I'm concerned that doing the file i/o in BACKEND1 is "expensive" - and I don't care about the performance of BACKEND2 as much.
I have a problem with the cryptostream, if i write the stream to a memorystream the memory that the stream used is still alocated and i have no way of unalocating it.what am i missingdoing wrong? im using-using on the streams,readers and crypto stuffs so the framework should shut them all down right? i tryed calling .close and .dispose but nothing ,in fact i moved it all over I have provided the sub that im using for the encrytion im in .net 4.5 so there is a lil async stuff but i know thats not the problem coz i moved this code out of my main app(.net 4) for testing to see if i could fix the problem.[code...]
I am trying to communicate with an external device and i am trying to send a byte array to the external device via sockets but i am always getting a response the message size is too small so i am not sure what i have done wrong. Between the data type there should be no alignment present and all numbers are represented in little endian format. The char array is not null terminated as mentioned in the protocol specifications.
I have to send data based on a struct that embeds 2 other struct. So here's my vb.net code for the struct used to convert to byte array and the sending part.
Public Structure MESSAGETYPE_OIP_Login Dim Header() As COMMANDHEADER Dim UserName() As PSTRING
I would like to know how to convert a unisgned byte to signed byte
Atm I got this
a Function readSignedByte() As SByte '-128/127 Dim b As SByte
[Code]....
it doesn't work one that well works for numbers positive over 127 if lets say ReadByte() has 128 it would give overflow error which I don't want it to give I would like it to overflow the number to negivate value aka its signed value.
trying to find a decent answer for my question; I do have a utf8 file which I (down)load, manipulate and wanting to save back again.The result always is that the file I produce is not in utf8 format;
Dim fs2 As New FileStream("c: est.dat", FileMode.Create, FileAccess.Write, FileShare.None) Dim w As New BinaryWriter(fs2, Encoding.UTF8)
