I have a reportviewer that I am rendering as a pdf into an in memory byte array. What I need to do is apply an owner and user password for the pdf. I have downloaded the adobe sdk and have scoured the Internet for examples to do this to no avail. with a VB.NET example that will apply the owner and user password for the pdf.
View 2 Replieshow to convert byte array to memory stream in vb.net.
View 1 RepliesI am using IonicZip to compress video files and store in a blob field. I have the zip file created just need to convert it to a byte array. How is this done without writing to the harddrive?
View 1 RepliesHow to convert memorystream byte array to csv file. I have GetExport method that converts rpt file to excelformatted memorystream and then returns that as a byte array. Is there a way to convert this byte array to a csv file? Due to some reasons I can only pass this byte array back to calling function.
Public Function GetExport(ByVal reportID As ReportID) As Byte()
Dim byteArray As Byte() = Nothing
Using expRptDoc As ReportDocument = New ReportDocument()
Dim rptFileName As String = Server.MapPath(ReportCommand.GetXMLReportPath(reportID))
expRptDoc.Load(rptFileName)
[Code] .....
I am trying to copy a byte array into a Class that is in a third party library
Dim usr As New RSI_USER_RECORD Dim ba(RSI_USER_RECORD.RSI_LEN_USER_REC - 1) As Byte 'populate ba here usr = ba 'how can I do this? Is this even possible?
Here is the definition of the class (from Reflector)
[Code]...
I'm trying to get a string from a byte array previously read from memory
i can get the string like this
dim mem as string= ASCIIEncoding.ASCII.GetString(memory) or dim mem as string= UTF8Encoding.UTF8.GetString(memory) but when i try to concatenate this with another string i get a strange result dim result as string = "this is you memory string " & mem & " problem string" no matter what comes after mem in the concatenation it seems like it is not there when in fact it is because when i try this (mem has two chars in it) dim result as string = "this is you memory string " & mem(0) & mem(1) & " problem string" problem string appears so what i assume is that there are some vbCrLf chars in the string after reading (or is it from the conversion?)
in VB.NET How can i write a memory stream to browser.My memory stream object has data to build a PDF file.Now i want it to be rendered on browser.How to do that ?
View 1 RepliesI placed this checkbox named owner on my form. When i build the project i got the error as
Quote: 'owner' conflicts with property 'owner' in the base class 'Form' and should be declared 'Shadows'
[Code]...
How to get the user/owner name of a process in vb.net?The reason I need it is because I developed an application,which I will put on the winnt enviroment, I want to allow multiple instance.but only allow one single instance per user.I am using Application.Run(MyMainForm) to start my application
View 8 RepliesI am trying to Convert a data field stored as IMAGE ( SQL Server 2000) using Java to a byte array using VB.NET Java uses signed numbers for a Byte array where as VB dosent. Can somone point me to how I can covert java byte array to VB byte array?
View 2 RepliesObjective: Combine byte arrays, read specific sections, and then cut byte array at specified point.
Private Sub DataArrival(ByRef aBot As xyzSocket, ByRef theData As Byte())
Dim RDLength As Int32
If aBot.ReceivedData Is Nothing Then[code]....
I'm not sure if I have this right to begin with because I can't test it without having it completed.
how to upload file using fileupload control into sql database. I have class where i created insert function and getting info frm the .aspx.vb file
Class File
========
Imports System
Imports System.Data
Imports System.Data.SqlClient
[coe]....
I'm fairly new to vb.net and trying to get information for a project at work! Basically I can list all the applications running on a machine, I cannot however retrieve the details of the user running it! At the moment I'm using the following code after importing System.ServiceProcess and System.Diagnostics.Process:
Public Sub GetProcess()
Dim pr As Process
A = 0
For Each pr In Process.GetProcesses(System.Environment.MachineNam e)
ReDim Preserve arrProcess(A)
arrProcess(A) = New String() {pr.ProcessName.ToString, Process.GetCurrentProcess.PrivateMemorySize64}
A = A + 1
Next
End Sub
I have tried using pr.StartInfo.UserName but that just returns the username of the person logged onto the machine.
I have 2 byte arrays. I want to merge these two byte array into 1 byte array.Usually, I just create a new byte array with length = byte array #1 + byte array #2. Then copy byte array #1 and #2 to the new byte array.do I have more efficient way to merge 2 byte array using VB.NET and .Net 4?
View 2 RepliesI would like to create a function so that I can pass a string and it will return me the binary value, I will use this later in other parts of the script but I am getting an error that I don't understand.
Private Function ConvertToMD5(ByVal OldPassword As String) As Byte
Dim NewPassword As String = ""
'The string we wish to encrypt
[code]....
On the "Return hashedDataBytes I get "Value of type '1-dimensional array of Byte' cannot be converted to 'Byte'"
I have 9 1-dimensional arrays of bytes and 1 of them is empty, I want to make the empty one equal to the others put together like you would a string:
Dim bla As String = "bla" & "bla" & "bla"
'now bla = "blablabla"
but instead:
[Code]......
How do I read a raw byte array from any file, and write that byte array back into a new file?
View 3 RepliesHow could you convert a IntPrt to a Byte Array (Byte()) ?
View 19 RepliesI have a byte array that I convert into a string like so Dim byt As Byte() = New Byte(255) {} s = New String(Encoding.ASCII.GetChars(byte))My question is when I look at the string in a debuger its clearly a normal string but when I compare it to what I know its supposed to be it doesnt equal. So i did a quick check and for some reason its return a string thats the length of 256 characters. So i did a s.trim and it still is 256 characters long.
View 1 Repliesgiven my code below, I'm trying to figure out how to create an array of 1 byte containing 7 bits. So the byte in the array would contain 0111111 to correspond to mData_Out's boolean values. How would I change the following code? [Code]
View 8 RepliesI am trying to get a count of all the times a byte sequences occurs in another byte sequences. It cannot however re-use a bytes if it already counted them. For example given the string let's assume the byte sequence was k.k it would then find only 3 occurrences rather than 5 because they would be broke down like: [k.k].[k.k].[k.k]. and not like [k.[k].[k].[k].[k].k] where they over lap and essentially just shift 2 to the right.
Ideally the idea is to get an idea how a compression dictionary or run time encoding might look. so the goal would be to get down to just 2 parts, as (k.k.k.) is the biggest and best symbol you can have.
Here is source so far:
[Code]...
How can I write a signed byte (sbyte) to unmanaged memory using VB.NET? I can use Marshal.WriteByte() to write an unsigned byte, but there doesn't appear to be an overload for signed bytes.
View 1 RepliesI am looking to create a simple password box that will ask the user for a username and pass, if the user is validated against the usernames and passwords in an .ini file the login box will close and launch a program also stated in the .ini file. I would also like to be able to launch different programs for different users.
View 16 RepliesI have a button on my Form called EditingButton that will have a DialogBox appear asking for a password. How can I have "*" show instead of the Password it-self when the user enters the password?[URL]...
View 1 RepliesI didn't think it fair to post a comment on Fredrik Mörk's answer in this 2 year old post, so I thought I'd just ask it as a new question instead..NB: This is not a critiscm of the answer in any way, I'm simply trying to understand this all before delving into memory management / the marshal class.
In that answer, the function GetByteArray allocates memory to each object within the given array, within a loop.Would the GetByteArray function on the aforementioned post have benefited at all from allocating memory for the total size of the provided array:
Dim arrayBufferPtr = Marshal.AllocHGlobal(Marshal.SizeOf(<arrayElement>) * <array>.Count)
I just wonder if allocating the memory, as shown in the answer, causes any kind of fragmentation? Assuming there may be fragmentation, would there be much of an impact to be concerned with? Would allocating the memory in the way I've shown force you to call IntPtr.ToInt## to obtain pointer offsets from the overall allocation pointer, and therefore force you to check the underlying architecture to ensure the correct method is used*1 or is there a better way? (ToInt32/ToInt64 depending on x86/64?)
*1 I read elsewhere that calling the wrong IntPtr.ToInt## will cause overflow exceptions. What I mean by that statement is would I use:
Dim anOffsetPtr As New IntPtr(arrayBufferPtr.ToInt## + (loopIndex * <arrayElementSize>))
I've read through a few articles on the VB.Net Marshal class and memory allocation; listed below, but if you know fo any other good articles I'm all ears![URL]..
A c# class's single dimension byte array contains socket level instrument sensor data as per:
public static byte[] frameData
is there is any direct method or function in array class that can check if any given byte array is a subarray of other array?or should i loop through the each byte of main array to see if smaller array exists in that or not?
View 2 Repliesgiven the following Sub, how would I initialize byte array 'temp'to zeros and give it the length of the incoming byte array passed into the subroutine?
Sub ReceivePacket(ByVal buffer As Byte())
Dim temp() As Byte 'initialize to zeros and length of buffer
temp = buffer.Skip(17).ToArray()
End Sub
how to save data (for example some text that user type [as password etc]) and save that password on same location where is application. After saving I want to have also Load option so we can load saved data.
View 7 RepliesI have an array defined As string and the value stored in site is like "7E", "A1" and so on. But in order to send out this array through serial port. I need to change the the array to As Byte instead of using As String. How can I convert it?
View 8 Replies