I want to create controls in runtime and attach them to an already connected database..
the controls must vary e.g.Array of Strings can be used.
how to place these controls on a panel in a orderly fashion.
I am looking to create several custom controls (PictureBox Derivatives) on during runtime. I've read that the best way is to create template controls that will be created, and duplicate them in the Controls array.
Well, that's all fine and dandy, but what's the best way to store the template? I considered a seperate form with all the templates laid out on it for easy access for my editing, and keeping them out of the user's sight. I also considdered doing a Struct for each template, and smply mirroring values onto the control being created from the Struct to the created control.
I'm looking for ease of development first and foremost, as I'm most likely going to have a vast number of these templates, and keeping the system as simple as possible will eliminate a lot of hair-pulling. After development ease, I'd go for optimisation.
Supposedly I have a datatable containing 2 columns (controlname as string, containing the name of the control and controltype as string containing the type of the control), for example ("label1", "Label") On runtime i want to loop over the datatable and create the controls from that datatable and add them to the form accordingly. but the problem that i don't know how to convert the control name to a control type, meaning that i want to convert label1 to a type of control Label, inorder for me to set its properties on runtime. so how can i do this and is there a way to convert the string to control according to it controltype.
View 1 RepliesI want to be able to select any control on the vb form at runtime. These controls will be added to theform on a click of a button. So essentially I want to dynamically be able to add and then select these controls at runtime. I would also like to make these controls dragable on the form.
View 1 Replies"add controls at runtime" how to add code to the controls. kinda useless with no code, ehh? all results only told me how to add the control, that's it. well, this result is different. i will teach you firstly how to add controls at runtime, then how to apply code to them at runtime
Firstly, add the controls:
[CODE]..............
Now run it. do you have a button on the form? if yes, excellent. if not, you made a mistake. try again now how to add code? you may have noticed that when you double click on any control, it says private sub button1_click(blah, blah, blah) Handles button1.click where it says handles button1.click is what determines when the code executes under what event for what control (in this case the click event for the button1). this won't work when adding code at runtime. did you notice in the above example i added a with event, and addHandler? this is what creates the handler (same as Handles button1.click)
Now we add the code for the runtime control
[CODE].........
Above, the addressOf button1_click tells the program to execute the sub button1_click when the button is clicked on (as determined by .click) but i know what you're thinking! your thinking "why would we even BOTHER doing this at runtime? isn't it easier to do it at design-time in the first place?" yes it is, providing your not writing a plugin. plugins are code based, not GUI (also reffered to as WYSIWYG). to update existing forms using plugins, you need to use this method.
I have created a form Dynamically at run time using this below code but how can i add controls to it.
Dim NewFm as Form
NewFm.ShowDialog()
how can i add treeview to this form and populate with data during runtime?
is there a tutorial (i looked, couldn't find) on adding controls at runtime?
View 8 RepliesI've created a code that will add a control on runtime.
Sub Button_AddNewGradeEquivalent_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button_AddNewGradeEquivalent.Click
Dim newGradeRepresentation As New TextBox
Dim newGradeCondition As New ComboBox
Dim newGradePercentage As New TextBox
TextBoxItems += 1
[Code]...
I did something that when I now load my program(VB 2008), my controls; combo boxes, buttons, progress bar, etc. look like they are from VB 2005 or like VBA buttons, not the rounded edge buttons of 2008.
They look like vb 2008 controls while I am in design view, but then they change their style when I run the program..
I have a situation where i'm populating records in datagridview from a table where first column is the ParameterName, Second Column is ParameterValue and third column is ParameterType.When i click on second column in any row as per the records, it should show the control type in this cell as per the third column parameterType.[code]
View 4 RepliesI was wondering if there was a way to dispose a control that i generated at runtime in a diffrent block of code, The reason why i can't dispose of the control in the same block of code is that the controls settings depend on what the user imputs. For example if i generate the control on a timer tick the code would look like this,
[Code]...
In the helpfiles of Visual Studio 2008 I read control arrays are no longer supported. There is an example for the new situation but then you need to hard code the names of all the controls beforehand.I do not know how many controls I need, could be one or 5000 (think simple image browser). Is it still possible to create something like that or should I change to a different programming language like Phyton? At the moment I work around it by using a browser control and then manipulate the <img> tags but I'm puzzeld as to why this functionality was removed and if there's a solution to the problem.Another thing I don't understand is where the app goes when it's installed with 'Click once'. It dissappears completely, doesn't show up in 'Program Files', can not be found by the search function but it *is* somewhere because you can start it form the Start menu. However, I use data which is in a subfolder of the program folder, which I nor my program can find any more after the app is installed. The program runs but it can't find any place to put/get its data so in the end it doesn't work.
I work around it by *not* installing the program but have people just run it after unpacking the downloaded folder. This works great but I wonder how long this will be the case until Microsoft disables this possibility? I have no idea why they would, but I also have no idea why they did remove the functionality I mentioned above. I already changed to PHP and MySQL because I had to throw away my carefully built W2K+MSAccess image database a few years ago and after installing Vista Visual Studio 2005 was a goner. OK, I upgraded but then no control arrays any more and now they hide the apps when you install them? Why on earth would they do that?
I am attempting to move all controls on a form down or up by the height of a menubar depending on whether it is visible or not. I have code which I think ought to work well for this, however it seems that Me.Controls is empty at runtime, so my for each loop is never entered. Could someone please offer a suggestion as to how I can move the controls?
Private Sub uxMenuStrip_VisibleChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles uxMenuStrip.VisibleChanged
For Each control As Control In Me.Controls
If control.Name <> "uxMenuStrip" Then
[code]....
How do you position controls loaded at runtime to align middle? I'm not looking to match the x y coordinates as the heights vary.
For example loading 2 text boxs and 2 labels.
I've tried using the Anchor and Dock properties but with no joy.
e.g.
txtNewTextBox = New TextBox
txtNewTextBox.Name = "name"
txtNewTextBox.Dock = DockStyle.Fill
[Code]....
I have to implement an application that allow the user to design his own card, the user will be able to drag and drop controls from toolbox and move them in the form and re-size them.
I can't make the control to be resizable,and i want to make the control just like the one in visual studio designer with the container that allow user to change the size ..
I have created a custom control in visual studio 2005. It contains a picture box with and image in it with 2 text boxes on top. I want to be able to resize this image by selecting the edge and clicking and dragging it.
View 1 RepliesI have so far written a program where you click a button and a custom control is added to the form. These controls can then be dragged and positioned anywhere on the form.I know want to be able to align/snap these controls.Please advise if you know of a way to drag a control on a form and snap it in line with another control?
View 1 Replieshow to add controls in panel control runtime. I mean, I want to add group box at runtime. When I click on my button, it should add a group box in my panel and when I click again, it should move the first group box down and add the second. Every group box should have a label control in it.
View 1 RepliesI am having some problems adding controls at runtime, or I guess I should say accessing the controls after adding them.The application starts off with a tab control named "tabIncidents" and one tab for an incident information. The user can click on a button to add a client. When the button is pressed a second tab is added to "tabIncidents" named "Clients." On the newly created "Clients" tab another tabcontrol is added named "tabClients" and we create a tab named "Client". Multiple "Client" tabs can be created on this tabcontrol. Each "Client" tab gets a usercontrol added named "clientInformation" which has name and address textboxes.
So basically it is ...
TabIncidents.tabFirstTab (already exists)
TabIncidents.Clients (new tab added at runtime if user clicks a button)
TabIncidents.Clients.tabClients (new tabcontrol on the new tab)
[code]....
I'm wondering, when I add dynamically controls in runtime in the form - is there a way to save this controls, and they appear the next time when you run the application?
I'm using VB9.
I am very interested to see the answer as I would like to know the significant differences (if any) of generally using one more than the other. In a few days, I will be starting my Java programming class to familiarize myself with the language.I do know that Java uses objects.My question/discussion is not necessarily related to .NET (although in a way, it is); my question is more about what is a better practice and why.Is it more proper to declare buttons and such through runtime rather than designer? Is it just more work typing everything? Or does build and run much faster?
View 9 RepliesCode:
Private Sub btnMonSet_Click(sender As System.Object, e As System.EventArgs) Handles btnMonSet.Click
My.Settings.tweetMon = tbMon.Text
If tbddOccurrence.Text = "Just Once" Then
If cbToday1.Checked = True Then
lblPanel.LblScheduledTweet1.whenDate = Date.Today
[Code] .....
The goal of this code is to add a control to a panel in runtime. This MUST be done in runtime for the purpose I intend. The problem is that, when I add a second control, the first one disappears.
I have created a usercontrol that contains two rectangle shapes to create a unique button effect and a rounded-corner rectangle shape serving as a border to provide a look similar to a group box. It also contains two labels, one for use with a Text property of the control and the other to indicate the status of expansion of the control. The control is designed to collapse itself when the "button" is clicked leaving only the "button" visible. Clicking it again toggles this affect. I've dubbed it an ExpansionBar. It is also designed to be a container control so that I can add controls to it and allow these to disappear when the bottom portion collapses. This seems to work great! The problem is that the controls contained in this usercontrol cannot be accessed during runtime. In other words, I can add a checkbox to it and it will disappear correctly when the control collapses, but I can't select the checkbox to check it... same thing with any other controls, you can see, but can't touch.
View 2 RepliesI need to change size parameter of OvalShape, I have about 100 of them, named like OvalShape1, OvalShape1...... OvalShape100
This example works for Label, but throws error for OvalShape, following is my modified code that giving error;
For Count As Integer = 1 To 100
[code].....
I create a rich textbox control at runtime. However, I have an RowEnter event procedure for a DataGridView control that needs to reference this richtextbox. I get the obvious error in the DV event prodedure saying that the richtextbox has not been declared. What do I have to do to allow this event to recognize this control even though it does not yet exist at design time? I realize the easy way around this is to hide the control on the form until runtime.
View 1 RepliesI want to create a Panel dynamically on the form when a button is clicked. Also labels with given TEXT are also to be created when create label button is clicked. then we should be able to print the form contents as it appears but without any buttons. We should be able to resize the panel to adjust the page size.
View 1 RepliesI know how to create a control at runtime e.g.[code]Can anyone tell me how to create multiple instances using a for-next loop? e.g.[code]The part I can't work out is how to give each new button a new name... like button1, button2 etc
View 4 RepliesI'm developing an app which creates like 30 labels at runtime.The problem is that with the click of a button, I need to destroy those created labels.[code]...
View 17 Replies[Code]...
I need the picture to have a tag value so i can use them later.
I'm just starting out using vb.net and i am writing my first application. I have added some comboboxes at runtime to my form using the code below.[code]Now my question is now that i have these controls added to the form, how can i iterate through them all and collect the values for sql injection. I have given each combobox a specific name when it was created such as Ball1, Ball2, Ball3.[code]
View 4 Replies
