I know how to create a control at runtime e.g.[code]Can anyone tell me how to create multiple instances using a for-next loop? e.g.[code]The part I can't work out is how to give each new button a new name... like button1, button2 etc
View 4 RepliesI am having some problems adding controls at runtime, or I guess I should say accessing the controls after adding them.The application starts off with a tab control named "tabIncidents" and one tab for an incident information. The user can click on a button to add a client. When the button is pressed a second tab is added to "tabIncidents" named "Clients." On the newly created "Clients" tab another tabcontrol is added named "tabClients" and we create a tab named "Client". Multiple "Client" tabs can be created on this tabcontrol. Each "Client" tab gets a usercontrol added named "clientInformation" which has name and address textboxes.
So basically it is ...
TabIncidents.tabFirstTab (already exists)
TabIncidents.Clients (new tab added at runtime if user clicks a button)
TabIncidents.Clients.tabClients (new tabcontrol on the new tab)
[code]....
I want to create a Panel dynamically on the form when a button is clicked. Also labels with given TEXT are also to be created when create label button is clicked. then we should be able to print the form contents as it appears but without any buttons. We should be able to resize the panel to adjust the page size.
View 1 Replies[Code]...
I need the picture to have a tag value so i can use them later.
I have created a usercontrol that contains two rectangle shapes to create a unique button effect and a rounded-corner rectangle shape serving as a border to provide a look similar to a group box. It also contains two labels, one for use with a Text property of the control and the other to indicate the status of expansion of the control. The control is designed to collapse itself when the "button" is clicked leaving only the "button" visible. Clicking it again toggles this affect. I've dubbed it an ExpansionBar. It is also designed to be a container control so that I can add controls to it and allow these to disappear when the bottom portion collapses. The problem is that the controls contained in this usercontrol cannot be accessed during runtime. In other words, I can add a checkbox to it and it will disappear correctly when the control collapses, but I can't select the checkbox to check it... same thing with any other controls, you can see, but can't touch. I'm a novice developer, so I'm sure I'm missing something obvious.
View 12 RepliesI need to change size parameter of OvalShape, I have about 100 of them, named like OvalShape1, OvalShape1...... OvalShape100
This example works for Label, but throws error for OvalShape, following is my modified code that giving error;
For Count As Integer = 1 To 100
[code].....
how to add multiple controls at runtime (ex. 10 texboxes)i tried.
Dim txt as New Textbox
Dim i as Integer
For i = 1 to 10
[code].....
At design time in the IDE, you can ctrl-click or drag a box around multiple controls on a form and move them all at once. How do you do that at runtime. I need to be able to create image maps based on textual copies of medical claim forms that are generated from different systems and the ability to create dynamic label controls and move a single or multiple controls and resize is required. How does MS do this in the IDE?
View 7 Replies1. i added a datagrid at runtime on a form. i want to bind a datasource to the datagrid in a button's click event handler, but the datagrid doesn't seem to be visible anywhere else outside the form load event where it is declared. how can i find the datagrid control?
2. and another beginner question.. how to i declare a string that spans multipe lines? i tried with the + operator like in c#, but it doesn't work.
I wanted to know if anyone could tell me how to access the Click_event.I have a boarderles form with a panel control which has the Dock property set to fill and on the panel I have placed a Label also with the Dock property set to fill. I also have a timer running.How can I get code to execute in the Label1 click event.I've tried doing it by using the generic Click_event and also with two variations of the Click_event Handles parameters
'Alternativ 1:
Private Sub Form1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label1.Click
[code].....
I am making an application that uses multiple WebBrowser controls, and multiple proxies.The code for changing the proxy settings are as such:
#Region "Proxy"
Public Structure Struct_INTERNET_PROXY_INFO
Public dwAccessType As Integer
Public proxy As IntPtr
[code]....
Note: getRandomProxy gets a random proxy from a list.Problem is that whenever RefreshIESettings(getRandomProxy()) is applied, the proxy will be applied to all of the WebBrowsers, while i would need to have a unique proxy for each WebBrowser. Not having this would just error out the page in the other browsers and so on.
"add controls at runtime" how to add code to the controls. kinda useless with no code, ehh? all results only told me how to add the control, that's it. well, this result is different. i will teach you firstly how to add controls at runtime, then how to apply code to them at runtime
Firstly, add the controls:
[CODE]..............
Now run it. do you have a button on the form? if yes, excellent. if not, you made a mistake. try again now how to add code? you may have noticed that when you double click on any control, it says private sub button1_click(blah, blah, blah) Handles button1.click where it says handles button1.click is what determines when the code executes under what event for what control (in this case the click event for the button1). this won't work when adding code at runtime. did you notice in the above example i added a with event, and addHandler? this is what creates the handler (same as Handles button1.click)
Now we add the code for the runtime control
[CODE].........
Above, the addressOf button1_click tells the program to execute the sub button1_click when the button is clicked on (as determined by .click) but i know what you're thinking! your thinking "why would we even BOTHER doing this at runtime? isn't it easier to do it at design-time in the first place?" yes it is, providing your not writing a plugin. plugins are code based, not GUI (also reffered to as WYSIWYG). to update existing forms using plugins, you need to use this method.
I have created a form Dynamically at run time using this below code but how can i add controls to it.
Dim NewFm as Form
NewFm.ShowDialog()
how can i add treeview to this form and populate with data during runtime?
is there a tutorial (i looked, couldn't find) on adding controls at runtime?
View 8 RepliesI've created a code that will add a control on runtime.
Sub Button_AddNewGradeEquivalent_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button_AddNewGradeEquivalent.Click
Dim newGradeRepresentation As New TextBox
Dim newGradeCondition As New ComboBox
Dim newGradePercentage As New TextBox
TextBoxItems += 1
[Code]...
I did something that when I now load my program(VB 2008), my controls; combo boxes, buttons, progress bar, etc. look like they are from VB 2005 or like VBA buttons, not the rounded edge buttons of 2008.
They look like vb 2008 controls while I am in design view, but then they change their style when I run the program..
I have a situation where i'm populating records in datagridview from a table where first column is the ParameterName, Second Column is ParameterValue and third column is ParameterType.When i click on second column in any row as per the records, it should show the control type in this cell as per the third column parameterType.[code]
View 4 RepliesI want to create controls in runtime and attach them to an already connected database..
the controls must vary e.g.Array of Strings can be used.
how to place these controls on a panel in a orderly fashion.
I was wondering if there was a way to dispose a control that i generated at runtime in a diffrent block of code, The reason why i can't dispose of the control in the same block of code is that the controls settings depend on what the user imputs. For example if i generate the control on a timer tick the code would look like this,
[Code]...
In the helpfiles of Visual Studio 2008 I read control arrays are no longer supported. There is an example for the new situation but then you need to hard code the names of all the controls beforehand.I do not know how many controls I need, could be one or 5000 (think simple image browser). Is it still possible to create something like that or should I change to a different programming language like Phyton? At the moment I work around it by using a browser control and then manipulate the <img> tags but I'm puzzeld as to why this functionality was removed and if there's a solution to the problem.Another thing I don't understand is where the app goes when it's installed with 'Click once'. It dissappears completely, doesn't show up in 'Program Files', can not be found by the search function but it *is* somewhere because you can start it form the Start menu. However, I use data which is in a subfolder of the program folder, which I nor my program can find any more after the app is installed. The program runs but it can't find any place to put/get its data so in the end it doesn't work.
I work around it by *not* installing the program but have people just run it after unpacking the downloaded folder. This works great but I wonder how long this will be the case until Microsoft disables this possibility? I have no idea why they would, but I also have no idea why they did remove the functionality I mentioned above. I already changed to PHP and MySQL because I had to throw away my carefully built W2K+MSAccess image database a few years ago and after installing Vista Visual Studio 2005 was a goner. OK, I upgraded but then no control arrays any more and now they hide the apps when you install them? Why on earth would they do that?
I am attempting to move all controls on a form down or up by the height of a menubar depending on whether it is visible or not. I have code which I think ought to work well for this, however it seems that Me.Controls is empty at runtime, so my for each loop is never entered. Could someone please offer a suggestion as to how I can move the controls?
Private Sub uxMenuStrip_VisibleChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles uxMenuStrip.VisibleChanged
For Each control As Control In Me.Controls
If control.Name <> "uxMenuStrip" Then
[code]....
How do you position controls loaded at runtime to align middle? I'm not looking to match the x y coordinates as the heights vary.
For example loading 2 text boxs and 2 labels.
I've tried using the Anchor and Dock properties but with no joy.
e.g.
txtNewTextBox = New TextBox
txtNewTextBox.Name = "name"
txtNewTextBox.Dock = DockStyle.Fill
[Code]....
I have to implement an application that allow the user to design his own card, the user will be able to drag and drop controls from toolbox and move them in the form and re-size them.
I can't make the control to be resizable,and i want to make the control just like the one in visual studio designer with the container that allow user to change the size ..
I have created a custom control in visual studio 2005. It contains a picture box with and image in it with 2 text boxes on top. I want to be able to resize this image by selecting the edge and clicking and dragging it.
View 1 RepliesI have so far written a program where you click a button and a custom control is added to the form. These controls can then be dragged and positioned anywhere on the form.I know want to be able to align/snap these controls.Please advise if you know of a way to drag a control on a form and snap it in line with another control?
View 1 RepliesNeeding pointed in the right direction. I am fooling around with data sources and connections per homework and what I'm looking for is creating an SQL DB connection during runtime. I know that you can add a data source in design by going through the Wizard but what if one would want to create the connection, adapter, and dataset during runtime? Where would you start?
I have cruzed the net looking for some form of a tutorial to just get me started, I don't need it all completely outlined but I need to know where and how to start and what I need to declare the connection, string, and dataset as. I have seen a lot of information using VB6 but nothing that I come across seems to work.
My basic questions are:Do I have to create a seperate class for the database connection?How do I delcare the nuts and bolts of the connection,adapter, and dataset?If a seperate class isn't required then where is the most realistic place these items would be created?
How can you add a system DSN with its security credentials programmatically at runtime from VB.NET? Keeping key in ODBC.INI is done, but when creating ODBC, it asks for Authentication Type (SQL or Network Login).How can we set that option at runtime?
View 2 RepliesI'm trying to make labels at runtime. The idea is to create them on the fly in runtime.
I have this on my form:
btnAdd
txtName
txtAge
[Code]....
Which work fine, but if I want to create another label, how do I check to see if one or more labels have already been created and then apply a new location of the new label? (so it doesn't get override on the same location on the form?)
Im creating a fairly simple game, and when the left key is pressed i need a new picturebox to be created.Heres the code Private Sub frmMain_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles Me.KeyDown
[Code]...
Now there are no errors in the code apparently, but when the left key is pressed, the picture box isnt appearing. I added the "lblAnswer1.visible = false" just to test the keydown functionality, and that works.
im doing a project in which im basically trying to make an etch-a-sketch style program.
I am using a 5x5 pixel picture box as the 'cursor' and have made the program so that i can move the picture box with the arrow keys. I am currently trying to work out how to make a trail of identical picture boxes (from an array of picture boxes) appear wherever the cursor has been using this code
Case Keys.Left
CurrentLoc = New Point(PictureBox1.Location.X, PictureBox1.Location.Y)
If Not PictureBox1.Location.X - 5 < 0 Then
[Code]....
Basically, im trying to make a trail by moving the original picturebox and the inserting an identical picturebox in the original's previous position. However, the new identical ones do not display