Creating Control Using Code?
May 16, 2012
I am trying to make a new label be created everytime the user clicks a button. But at the moment when the user presses the button It only creates one, if the users clicks the button again. Nothing happens.
This is my current code I use:
[Code]...
I know that the label is not being created on top of each other because the location values changes everytime the user clicks the button.
View 1 Replies
ADVERTISEMENT
Sep 28, 2010
I'm creating a custom control which inherets the BindingNavigator.I need do add one ToolStripButton at specific posistion (9 element) on the ToolStrip of the BindingNavigator.So, I wrote the following code:
[code]...
View 7 Replies
Apr 14, 2011
i recently received a new work pc and have installed visual studio 2010 premium on it. this was installed on my old machine as well, the only differece between the two PCs being my old one was 32bit and the new one is 64bit.With that said, when i create a windows form project and drop a control on a form, double click that control, the default event code is created for me.It is missing the "ByVal" portion of the code. Using a textbox as an example, below is the code it generates. Is there a setting that I'm just missing and need to turn on? I've been using visual studio since version 2005 and i've never seen this before.
Private Sub TextBox1_TextChanged(sender As System.Object, e As System.EventArgs) Handles TextBox1.TextChanged
End Sub
View 3 Replies
May 8, 2011
I have an array of picture boxes as so:
Dim pieces(500) As PictureBox
pieces(1) = New PictureBox
With pieces(1)
[Code].....
The program does not crash or anything, but the picturebox is no where to be seen on the form. How to I make this work correctly?
And is 'Control Array' the correct term for this? or something else?
View 2 Replies
May 19, 2010
I am having difficulty trying to come up with the code logic for having program calculate three different runners scores and placing them as First, second or third place standings, dependent on their times (seconds).
View 3 Replies
Nov 10, 2010
I'm writing some VB2008 code to control four 7-seg LEDs I bought from Velleman. They came with some example code in VB 5.0, and with instructions telling me to input 5 bytes at a time in the format Chr$() & Chr$() & etc. for the rest of the 5 bytes. When I try to do this using VB2008, it rejects the $ sign, so I've tried it using the Chr() format, which VB2008 allows. However, it doesn't work. Is Chr() the new version of Chr$() or are they different entities? In sending data to the LEDs, I'm using LiveComPort.WriteLine() as my command. (My serial port is called LiveComPort) I also tried it with LiveComPort.Write() asthe command. I know that my serial port and the LEDs are working, because they respond to the demo program provided by Velleman.
View 7 Replies
Jul 14, 2010
Form1.ToolStrip1.Items.Add(New ToolStripButton With {.Text = TextBox2.Text, .Tag = TextBox1.Text, .Image = fav,.}
View 1 Replies
Oct 21, 2010
Is is possible to create and save a screenshot image within an application? Basically what I want to do is if an error occurs on a form or web app, I want to capture and save an image of the screen/form from within the application...like, within a Try Catch construct
View 4 Replies
Apr 5, 2011
I want to create a program using vb.net code.What I mean is: write all the files necessary to be able to compile it to a .exe-file. Is there any way of doing this?And what is the easiest for the form creation? Winforms or WPF?
View 2 Replies
May 3, 2012
when i create a new form i get this in the codePrivate Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
View 4 Replies
Nov 16, 2009
Which control should I use to create menus in vs.net 2008?
View 1 Replies
Dec 15, 2009
Is this possible? I am trying to create my own "X" and "minimize" buttons on my form -- the only way that I can currently think to do it is by making my form have no border, and creating a 'fake' menu bar using labels and buttons for minimizing and maximizing. The goal here is to be able to have custom icons for maximize, close, etc that may not match the Windows default scheme.
View 1 Replies
Apr 15, 2010
want to create a custom control of the button such as the button will be a bit enlarged and with a different colour.A custom control is a class that either inherits the Control class directly or some other control.So Iadded class named class1.vb and added this line:Inherits System.Windows.Forms.Button
View 6 Replies
Mar 15, 2010
this is my code in vb.net behind where i am creating the radiobutton -
TD = New HtmlTableCell
Dim rdb As New RadioButton()
rdb.ID = "rdb_ads_" & DR("ID")
TD.Controls.Add(rdb)
TR.Cells.Add(TD)
It displays the radiobutton, but doesnt select single. i can select all at one time. how do i make it to select only 1 at a time.
View 1 Replies
Oct 27, 2011
Basically, I have a view (can be converted into a store procedure) with two tables NODE and CONTACT. NODE is the parent table (NodeID) with the foreign key field in CONTACT (NodeID). The query works fine. I would like the treeview to look like this
[Code]...
View 5 Replies
Dec 5, 2010
I'm coding an application that will work with many arrays of data. To make the code easier I want to make a user control (called Multiselect) that will include a textbox and a treeview. The textbox will be alway visible and treeview will appear when needed.The user will put a string in the textbox and the MultiSelect will search all of the stored data in a array that match the searched string. When done, the TreeView will appear and show the found items. User will have an opportunity to choose the right items through checkboxes.
What I can't do is the TreeView. I want it to act like the autocomplete in Visual Studio editor - for example you are in a class and type "me." and Visual Studio offers you all methods possible in a window. This windows doesnt get focus, but if on the top of the main form so the found items are visible over the text.
View 1 Replies
Aug 7, 2009
I want to create a control that drops onto that tray area below the form designer. Such as how a FileSaveDialog or an ErrorProvider would do. A class that's available in the toolbox and the properties are available visually in the designer, instead of declaring it in the form's text code. What do I have to set to get that behavior?
View 4 Replies
Oct 23, 2009
how I would change the look of my tabs in my tab control. For instance the default is a rectangle.. while in the VS2008 IDE the tabs have the left corner slanted.
View 8 Replies
Jun 4, 2010
I really need to create very huge 2D matrices such as 5x5, 10x10, 7x7 and use them for basic Matrix calculations involving Matrix multiplication, Transpose and Inverse.
View 2 Replies
Nov 24, 2009
I'm creating 50 picbox in code. they are named Area1_1 to Area 1_50.
They all have different XY position and different size, setup in % of the form width.
Like this:
Code:
Dim Area1_1 As New PictureBox
' Dim 48 other box...
Dim Area1_50 As New PictureBox
[Code]....
But it don't work. Probably because the controls is not added to the form yet...
View 8 Replies
Feb 6, 2009
How would you create depth code for two classes in visual basic 2008 (like if you wanted to put one picturebox behind another picturebox depending on what each picturebox's depth equals)?[code]I can't get my movement code and the image for the character object to work.
View 3 Replies
Feb 16, 2010
I have a control that is created in the code behind and generates fine but I can't figure out how to create an event handler for it.I've found plenty of examples for it in C sharp, but none of them seem to apply to VB.
View 4 Replies
Jul 1, 2008
I'm trying to write code to create a new database and then create tables within the database.
I'm running into a strange problem right now, which is the fact that I was able to create a new database ok on either the regular SQL Server instance, or the SQLEXPRESS instance. However, when I attempted to create a table, I got an error message saying that there is already a table of the same name.
When I tried to connect to the new database via SQL Server Management Studio, I could see the database. However, there are no tables in it! So, theoretically, I'm creating a brand new blank DB, so there should not be anything in this DB, right? and I should be able to create any tables I want in it!
Here is the code that I have so far:
[code...]
I just have one simple form with a button on it. The click event on this button calls the CreateAllDBs() routine.
View 6 Replies
Aug 6, 2010
I have a form that is populated with specific data for each user. The user chooses this data themselves.I plan on saving this data in the application settings or via xml serialization.What I want to do, is allow users to generate a unique code for that data so that they can supply this code to others and all they will have to do is copy and paste it into their client and that data will populate for them.I could just allow users to trade XML files, but I want it to be easier than that.The form is basically setup this way;
Picture - Data 1, Data 2, Data 3, Data 4
Picture - Data 1, Data 2, Data 3, Data 4
The pictures correlate to pictures that are numbered anywhere from 0-600. The data can be any integer value from 0 - 200.
View 16 Replies
May 15, 2011
The editor basically uses a bunch of labels and pictureboxes (for now) and then an image is created from the panel which contains all of the controls.It sounds quite confusing, but basically i'm trying to create something like visual studio itself, which will allow "controls" to be added onto a panel, and then everything can be exported as an image when the user chooses to.I've worked out all the code to move controls and exporting the image, just having trouble trying to work out how to add an event for newly created controls as you can only handle a control, and not a variable.
View 3 Replies
Jan 25, 2012
I'm reading about the WPF Navigation Services and I have a general question.At run-time I want to be able to parse an external XML file that has information about an UI (i.e. a series of screens) and then in the code-behind create a WPF Navigation service with multiple Pages. Is it possible to create a new WPF Page at run-time or do they have to be created in Visual Studio first?
View 1 Replies
Jan 15, 2007
my project is about creating stock control system to a bookstore which you can get details of books available,slow moving books..etc i just want to know about creating forms for my project what kind of forms you needed for ex: add,edit,delete btns.
View 4 Replies
Apr 4, 2011
I simply want when someone hovers his mouse over a checkbox a "tip balloon" to appear describing what the control does?Using VB.NET with Visual Studio 2010.
View 2 Replies
Feb 3, 2010
I am currently trying to create a generic navigation control with a similar style to the outlook navigation bar. I have figured out how I would be able to dynamically create the bottom part where you select the menu option, but I'm struggling to figure out how I would be able to create the top part, which can contain any user control that the developer would want.So basically what I'm trying to figure out is, is there a way to allow for a developer to add controls to a specific area of your user control?
If there is a way of achieving that then if anyone knows how to do this;In ASP.Net you have the login controls and with one of them, you are able to have different views depending on whether the user who is viewing the web page is logged in or not. Is there a way of achieving this in VB.Net for a user control that could be set up so that I could have the developer able to switch the view in the designer to show them the view for when a specific navigation option has been selected.
View 1 Replies
Mar 16, 2009
How dow I create a user control for use in a webpage using VB.NET (not ASP.NET)?
How do I use that control in a webpage?
Can my control cause an event in the webpage and how? Ie. my user control has a button, and I want a Javsascript script to run when i click the button
View 4 Replies