DataGridView And Checkboxes Re-selecting Automatically
May 24, 2010
I have a strange problem with a DataGridView I'm using which is bound to a table in VB.net
I've added a checkbox column to allow a user to tick a bunch of rows that I can then loop through and save off to a different table. All the checkboxes are enabled by default. So it's really a case of unchecking the rows which aren't required.
However, the DataGridView re-enables any checkbox that I click after I click on a checkbox in another row. So in effect, only one row can be unchecked at a time.
EDIT: I forgot to mention this is a Windows form, not an ASP.net application.
View 3 Replies
ADVERTISEMENT
Nov 25, 2011
Basically Im a vba programmer and Iam facing a serious problem with the checkbox controls of the VBA.I have to select and deselect the checboxes as per user selection. I believe this is a general question for vb.net also.some sample code
sub chk3_Click()
if userform.chk3.value = true then
userform.chk4.value = true
userform.chk2.value = true
end if
[Code]...
View 2 Replies
Feb 17, 2009
This is a simple program, nothing crazy, just for a VB class. The program just a food ordering form. Each part of the order has a group box, with the type of sandwich, side, beverage, dessert you want selected via a combobox, and toppings selected with checkboxes (the code for the beverages is coded differently and giving me 0 problems, but at the instruction of the teacher who saw beverages giving conflicts with the way everything else was coded because radio buttons are used instead of checks).
[Code]...
View 3 Replies
Jun 3, 2010
I have a form that opens another. I want the second form's checkbox to match the first form's after the second has loaded. I tried using MyForm2_Load, MyForm2_Activated and MyForm2_Shown but the checkbox checked state of the second form always changes the checkbox in first form. The code below works if I check the checkbox in either form, the other changes to match it. The problem occurs only when MyForm2 is first loaded. How can I get it to work the way I want it?
[Code]...
View 5 Replies
Sep 1, 2009
When my application starts, it scans the computers registry for COM ports and adds them in the combo box. The combo box first index is just a blank, and the second is COM1, COM2,...COMn. What I want to do is by default, I want my program to select the first COM port in the combo box, so in this case, COM1.
I know I have to use the PORTNAME property of the serial object, but not sure how I would set that equal to the 2nd index of the combo box.
View 3 Replies
Aug 6, 2009
I'm trying to automate a form process from a previous employee. One of the things that I have to do to achieve this is select a COM port from a dynamically populated list. I've looked around and the closest thing I could come up with is something like:
.cbbCOMPorts.SelectedItem(1) =
True
While this compiles, the computer does not like this at run-time. It throws an exception out:
"Object variable or With block variable not set."
View 3 Replies
Sep 12, 2009
I was just wondering weather it was possible to make it so that if I press the first a item on listbox1 then the first item on listbox 2 is selected aswell. For example I would like to have 2 listboxes lst1 and lst2 and I would like it so that when I select the first item on lst 1 then the first item on lst2 is automatically selected and when I select the 3rd item on lst1 then the 3rd item on lst2 is also selected.
View 7 Replies
Dec 9, 2010
How to count the total no. of asp.net checkboxes, checkboxes checked, no. of checkboxes remain unchecked in webform using vb.net ?I m using Visual studio 2008 with vb as a language ..I my webform i have 10 checkboxes...i wanna count total no. of checkboxes in webform in textboxes1 total no. of checkboxes checked in webform in textbox2 total no. of checkboxes remain unchecked in webform in textbox3?
View 2 Replies
Jun 13, 2010
How can I do it so every time the user loads my application it will automatically (without prompt, or user selecting) upload all the files in a folder i select beforehand and add them into ListBox1
View 16 Replies
Jun 21, 2010
I'm working on a project where I've loaded a database into a DGV. I also have an additional unbound checkbox column for the users to select entries with. I have code in place to read the selected rows and save them into a CSV string, which is then saved in the usersettings. All this works fine.
PROBLEM AREA:
I'm trying to reverse this effect so that when the DGV loads, the checkboxes that the user selected previously are checked (and the others left unchecked). I've debugged this extensively, and using watches have confirmed that all the values in the loops are right, and the conditionals are all kicking correctly, but it seems the code I'm using to actually check the boxes doesn't work. I've searched dozens of web pages, msdn white papers, and forums, but no suggestions will check the darned box. Below is some example code.[CODE...]
In debugging, it seems the value for the Cells IS changed, but the checkbox never gets selected. The try/catch was just to pick any error messages (but there are none with this code). What am I doing wrong here?
View 5 Replies
Jun 21, 2010
I'm using datagridview in my vb.net project. In that datagridview I use checkbox for null value check property if the user click that how I check if the box is check or not in a number of rows and know how many check boxes are clicked also want to count. i try with my coding but it leaves the first line how I check.
Dim tableid As Integer
mydisp = New SqlDataAdapter("select max(id) from tst_m_tables", Myconnection)
mydisp.Fill(mydst, "id")
tableid = mydst.Tables("id").Rows(0).Item(tableid)
For i = 0 To dgvtabledetails.Rows.Count - 1
[Code] .....
View 1 Replies
May 6, 2012
I have a datagridview that is showing Yes and No in 2 checkbox cells. (Logically I should have just one checkbox but it is a legacy program (from Excel VBA)). So what I want to do is if the user clicks one checkbox cell to make the value True then the other checkbox in the row needs to be set to False. I have googled and searched the Forums here for an answer for this but found nothing really specific. The envisaged problem here of course would be that the events are mutual so they should not keep firing continuously in a "loop" when one or the other is changed - that might be the really difficult bit.
View 5 Replies
Dec 5, 2010
I Have a problem with selecting a row in a datagridview. I want the user to press on the data rowheader of the data gridview of a particular row and then that rows first item are put in a string. But the problem is that if i Select an item another item is still selected. So If I press the mouse button on the row header the previous item is still selected and then the wrong data is in the string. Here is the code under the event of the datagridview mouse click:
Private Sub dataGridView1_MouseDown(ByVal sender As Object, ByVal e As MouseEventArgs) Handles DataGridView1.MouseDown
Dim hit As DataGridView.HitTestInfo = DataGridView1.HitTest(e.X, e.Y)
Dim index As Integer
[code]....
View 1 Replies
Jun 4, 2011
i am currently having problems with Datagridview, for example when i select the first checkbox, second checkbox onwards.
I would like to update the textbox on my form to display '2' records selected. But there is one problem i faced is that when i deselect the checkbox, it does not update. It still display '2' record selected. What event handler should i use to get it to work?
Private Sub DataGridView1_CellContentClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgvAssignGridView.CellContentClick
[Code]......
View 1 Replies
Mar 9, 2010
.Net 3.5
I have 2 columns in a datagridview bound to datasource. When the user checks off one checkbox, i want to check some business logic after which I set the 2nd check box in the same row as checked as well.
My problem is: I want to check the 2nd check box right after the user clicks on the first checkbox and not only after he tabs away by clicking somewhere else.
Right now, I only succeed runing my business logic in the CellValueChanged or CellParsing events but those only occur after the user leaves the checkbox, which is not desired, I d like to run the logic and show the 2nd checkbox checked right after the user clicks on the 1st checkbox.
I also tried: CellClick event but I don t know how to : when the user clicks on a a checkbox, how to change the value of other checkboxes in the current row during CellClick event . The changes does not take effect in the UI !!!
View 2 Replies
Sep 29, 2011
I have a datagridview that is bound to a dataview. I use a textbox to sort the list of data in the datagridview. Once the list is sorted I want to click on a row to populate the textboxes in order to update the data. Problem is once I sort the data I click on say row 3 and it pulls up the orginal data before the data was sorted in the datagrid view. For instance:
Before Sort:
1. betsy
2. james
3. john
After sort:
1. john
2. james
3. betsy
If I double click row 1 it will pull betsy info into my textboxes instead of john. I currently refresh my datagridview after every letter is entered into my textbox. I also reload my dataview and rebind the dataview with the datagridview.
View 2 Replies
Oct 5, 2011
Currently I am using this code to fill my datagrid.
Dim da As New SqlDataAdapter("Select id, name, type, add1 from [company_details]", con)
Try
If Pdetails.Visible = True Then
con.Open()
Dim ds As New DataTable
[Code] .....
View 7 Replies
Feb 14, 2010
I have a bound datagridview containing 4 columns. All I want to do is click on a row and then assign the value for each column to other controls (in this case textboxes). My problem is, I'm not sure which Event to use. I don't know how many events I've tried the code below in several different events but none of them are working.[code]
View 5 Replies
Jul 29, 2011
I try to select the last row like this:
Dim lastRow As Integer = DGV.RowCount
MsgBox(lastRow)
DGV.Rows(lastRow).Selected = True
The messagebox returns the correct number, but when it comes to select that row it says:Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index
But if I assign it a row, example: DGV.Rows(5).Selected = True
View 2 Replies
Jul 12, 2010
I am working with a datagridview and checkboxes. Ok, I have the following code which runs without any errors but doesnt give the required results.
1) My problem is that, when I uncheck the checkbox in Cell 2, I want Cell 9 and Cell 6 to be empty.
2) When I uncheck the checkbox in Cell 2 and click any other Cell in the datagridview and check again checkbox in Cell 2 - it DELETES the data in Cell 9 & 6.
Now, when I check again the checkbox in Cell 2, Data is not populated in Cell 9 & 6 regardless how many times I try....
[Code]...
View 2 Replies
Mar 20, 2012
I believe the following code, which clears/unchecks the checkbox in the "RowSelect" column, actually runs, but it runs VERY slowly. In testing I have approximately 2300 rows in my DataGridView:
Private Sub btnClearAll_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClearAll.Click
Dim curRowIndex As Integer = 0
Try
dgvWISDataGrid.SuspendLayout()
For curRowIndex = 0 To dgvWISDataGrid.RowCount - 1
[Code] .....
The app appears to "hang" because this loop is taking so much time. When I hit the pause button, it always seems to freeze on the "dgvCell.Value = False" statement and when I hover over it the popup says "Property evaluation failed." Something is taking quite a long time or is interfering with this routine.
View 1 Replies
Jul 14, 2010
i've create a datagridview with two columns, one textbox and the other checkboxes. The chekcbox column has a check box in column header aswell.
When i resize each column the checkbox column speciallly the checkbox in the column header, does not align with the checkbox column, it even goes in the textbox column as well. How do i fix this column resize issue?
View 2 Replies
Sep 30, 2009
I have a checkbox column in my grid. Let say the name on that column is "Cut". How should I do to take the right mouse button and and get a little menu where I can choose select all or deselect all checkboxes?
View 5 Replies
Jul 9, 2009
I have a DataGridView that is being populated. What I'm trying to accomplish is when I select like 3 rows I click a button and it gives me the "row numbers" for those three rows.
View 3 Replies
Sep 30, 2009
I have this datagridview on form1. It can select the items that be selected. But the problem is I want to select all the items. Here is the code that the datagridview can select one by one:
Dim i As Integer
Dim ds As DataTable = CType(DataGridView1.DataSource, DataTable)
Form1.TextBox1.Text = ""
[code].....
View 3 Replies
Mar 1, 2010
how can i select full and first row of datagridview in vb.net on form_Load
View 2 Replies
Oct 25, 2011
Is there a way to make a column unselectable? I can make the column read-only but it would be easier if it was unselectable so the user won't be confused trying to enter data into a read only cell. So if I clicked on a cell in that column or moved into that cell in that column it would jump to the next column, or not focus on the cell at all.
View 4 Replies
Nov 27, 2009
I have to implement a column (TransactionCompleted) which will only hold two states Yes/No. I am using SQL Express and wonder which would be the best DataType to go for that column, if I prefer to display the data in a DataGridView column as CheckBoxes later in my application?
View 5 Replies
Sep 22, 2010
With the two lists (t1s and t2s), I want to display t1s in a DataGridView, and in one column show the T2 property as a comboBox column, which dropdown will show the t2s list such that a new list instance can be selected. T2 has a Name property that should be used for displaying it in the comboBoxColumn.
I'm able to display the dropdown, but remaining a few problems:
1. How to display the correct comboBox "selection" on "load"?
2. How to change the T2 child object instance when combobox selection is made?
3. This is a really basic problem, which suddenly happened and I just couldn't understand what I have changed; The code marked BLUE now just shows empty cells.. While the AutoGenerated columns do show values.. Shouldn't those "manual" columns work?
[Code]...
View 29 Replies
Oct 5, 2009
NB: I'm using Visual Basic.NET?My form has 2 DataGridView controls. One of these is bound to a DataSet, the other isn't visible - at least not until the user selects a uniqueidentifier cell in the 1st grid.When the user makes this selection, the 2nd grid will become visible and display the row from another with the same id as the one selected in the 1st grid.So, basically, I want to dynamically display data in one grid based on user selection in another grid.My code looks like this so far...
Private Sub RulesGrid_CellClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles RulesGrid.CellClick
Try
FlagsGrid.Visible = True
[code]....
View 2 Replies
