I have tried to publish my program. For the time being, no errors when save or do anything. Then again, when I check the database (Ms Access 2007) that is being used, there is no data in there.
My program is to capture image. The image is captured in put in folder but no data at all in my database. How to solve this?
I have setup Build = content and copytooutputdirectory = copy if newer.
Now I did a clean build, and tried to publish, and I get a lot of errors and warnings that I don't understand.
Error1Cannot publish because a project failed to build.11AllJ Slots
Warning2Assembly 'Microsoft.DirectX.AudioVideoPlayback.DLL' is incorrectly specified as a file.AllJ Slots
Warning3Assembly 'Microsoft.DirectX.DLL' is incorrectly specified as a file.AllJ Slots
Warning4Assembly 'Microsoft.DirectX.DirectSound.DLL' is incorrectly specified as a file.AllJ Slots
Error5An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISigned
:Sign returned error: 0x80880253
The signer's certificate is not valid for signing.
SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exeAllJ Slots
my vb.net project with MS access2007 database is not working in windows 7 My proj details:
VB.net vs 2008 ,32bit OS
database:MS access2007
My project is working fine with windows vista but in windows7 its not working?It runs in windows 7 but database is not working?
I have a finished project which is to be distributed via CD-ROM. The project has been previously built and published without problems but now will not do either. I am getting the following:Cannot publish because a project failed to build.The signer's certificate is not valid for signing.
View 3 Replieshow if it possible to publish program straight to wep. I asked before another question about publishing and making setup files, that worked well. But now I have finished other of my programs and I want to know can I somehow add it straight to wep site? I have now used suntuubi.com as own wep site, it's not the best but its free :) And I have usually posted a link to download setup from mediafire (or some other) but can I run that program from my page without any downloads? I made that program with windows forms application, do I need to use wbf broswer application? ( if so, can I somehow fastly switch it without making everything again?) And one more, if it is possible in some other wep site than suntuubi.com can you recommend it?
View 1 RepliesI am trying to publish a project that is 100% working, so that people can use ClickOnce to install it.Despite the project building and running fine, I am unable to publish it. Here is a cut and paste of the error [code]...
View 8 RepliesI am coming to the end of coding this system in Visual Studios 2008 which I took over from a guy who has worked on it for a year.He is not here anymore.He made 9 projects and put them into one solution(screen shot below).I have only published a .NET website for VB and have never published something like this.P3Data is the only one that the publishing tab comes up with. All the other projects the publishing tab does not come up. Why is P3Data bold? How can I publish the whole solution 'P3Data' as one whole entity?
View 5 RepliesI'm getting desperate with this error: "Cannot publish because a project failed to build."
I've been googling around and was unable to find a solution. I already[code]...
I have finished developing a small, completely useless but working project. It was my first in VB.
What i wouold like to know is how is the best way to get this project online for download?
I dont have a web site or web page, and this project is just a bit of fun (fitness test).
Could anyone tell me the steps I have to take? All i want from it, is to be able to place a series of screen shots explaining the project and then if someone should wish to download it they can.
I dont need prime time internet coverage, just a place to put it online, pref free. Plus, there have been many kind people from this forum who have given me thier free time and effort to help me with code issues, so if I am allowed and any one is curious i will post the site link to here and you can see where your effort has gone to, and should you wish provide positive and negative comments at your leasure.
I have a project in vb.net2008. I use tools of vb6 and excel in it. Now I want to publish my project and use it in other computer that not installed vb6, vb.net2008 and excel programs. What must I do?
View 1 RepliesSince I'm unable to publish my main project, I've decided to start from scratch to see if I can locate the problem. I created a brand new project, just a simple form and dragged 4 controls onto it (a label, a button, a combo box and a checkbox). There is no code in any of the controls.I published this using Clickonce at url...(I'm aware people may not be happy clicking links). It's set to run only from the webpage. It runs fine on this PC, but on my friends PC and on my spare PC, it simply churns up a page of html error codes.
View 6 RepliesPublic Sub bk()
Try
Dim strDatabasePath As String =
[code].....
Public Sub bk()
Try
Dim strDatabasePath As String =
[code]....
I am using VS2010. I have a project that has been deployed for several years. Project builds fine but now suddenly I get the message "Cannot publish because a project failed to build. This program is been updated and published hundreds of times.
View 11 RepliesIs there a way I can publish *.ascx files without adding them to my project?I am trying to make my user controls in Visual Studio 2010 reusable. I have a project containing my user controls called ControlsLibrary solution directory. I copy the ascx files to the web directory upon building the project with build events.I use the command copy "$(SolutionDir)ControlLibrary*.ascx" "$(ProjectDir)controls"
This copies the *.ascx files from G:/SolutionDirectory/ControlsLibrary to C:/Inetpub/wwwroot/WebProject/controlsNow when I publish WebProject, the publish does not copy the *.ascx files from C:/Inetpub/wwwroot/WebProject/controls to my website. This is because they are not added to my project.
Is there a way I can publish *.ascx files without adding them to my project?I know there is a way to publish all files by selecting the option "All files in this project." That includes more files than I want.
I am by no means a programmer, but I was recently tasked with moving our website to a new server, since the website manager quit. The Visual Studio solution was written in 2008. I can compile and run the solution, so I'm sure it's working just fine. But every time I try to publish the solution, either to FTP or to my local hard drive, the .asp webpages get deployed to a sub directory, where on the live site, they are in the root.
View 1 RepliesI am getting two errors
1) Cannot publish because a project failed to build.
2) An error occurred while signing: SignTool.exe not found.
Regarding #1, I can manually build and rebuild the application without error. I only get this error when I try to Publish.
Regarding #2, I looked in my SDKv3.5Bin directory and indeed the signtool was not there. In fact I only had 3 files (genasm.exe, genasm.exe.config, and hidpi.res). I copied the signtool.exe from the Visual Studio 2005, (file dated 10/26/2006), but I still get the same error saying it can not find the file.
I am creating a project which i will be selling to an organization
View 9 RepliesI'm using Visual Studio 2010 and I have a Batch inserted into my project and cannot for the life of me get it to run with the program in someone elses computer after publish?
View 7 RepliesI have a project that I have created, it something like a contact database.It is complete with its own sql server database, and controls and forms.I kinda of understand that I can include this project into another project.This is the tricky part,Can I include my contact project into another project and add more items to the database and forms in a new project?What I'm after is like using classes.My contact database would be like the base class, and the new project would be adding more features to that project.
View 10 RepliesI am doing the POS system. I have one database only. When i run the program in the VB.net Application, it has no error, the program work fine. But after i publish it and install into my computer. I run the program, it still can work when in the login part, it can retrieve the database in the login part but cannot work in the Sales part.. I really have no idea on what is wrong with my database connection. I have try many way but fail. hope someone can give me some direction. below are the error message and detail it gave me. The error message pop out.
[Code]...
i want to have a built in database for my project this is what i did so far, i placed the mdb file inside the project
[Code]...
IDE :: Publish - Won't copy database on setup
View 3 Repliesvs 2010, vb.net My program uses clickonce to automatically check my website for an updated publish, and then download and install if a newer version exists. I have been publishing my updates with the database excluded because if I include it, it overwrites the user's existing database with a new empty database.
My issue is that the new version of my software needs to have additional columns added to the existing database so that the user can save additional information. For example, the previous database table allowed saving client first name and last name, but the new version needs to have a new column for "address".
Is there a way for me to add a permanent database table or add a column to the user's existing database table without overwriting their current data?
Dear Sir,When I publish my package, i am getting the following error.
[Code]...
I think this can be solved by Changing the validity in the signing property of the package. But I'm not able to change this period.
The situation: when i build my project (or publish) Visual Basic 2010 makes and exe and a couple ddl files. when i run the project with the .exe and the other files the program works perfectly.
My problem: I want to share it with friends and it is just a verry little program ( a n internet radio) so i want it to be 1 .exe with out any other instalation needed so i can easly share it to anyone who wants it. when i make an even smaller program and Debud->build it, it is only 1 exe and no instalation needed. so is there a way to make my program to 1 exe only?
how to publish an application with an access database file on vb 2005?
View 2 RepliesI am attempting to publish a project I have just finished on a DVD. The problem I have is a lot of the computers this project will land on, have no internet capability.
How then do I get things loaded on their computers such as "MS .Net Framework 4 Client Profile" and the Powerpack dll?
ive created a program in VB 2008 and i cant remember how to publish it in such a way that it includes the database that the program uses. At the moment when i publish it, it only works on my system because i have the database on my PC, if i delete the database from my pc the program messes up because it doesnt have a copy of the database in its program resources etc.how do i publish the program so that it includes a copy of the database that it needs to function?
View 6 RepliesWhat is the difference between vb.net application and asp.net application? How can I publish an ASP.Net application with database residing in the server and user could update that through internet?
View 2 Replies