i want to know is it possible to bind my all crystal reports to a single reportviewer, somewhat in tabbed view or treevie. If tabbed then visible through navigation button.
View 2 Replies
Is it possible to display different with a single a report viewer such that when I click on the button "Report 1" to should display Report 1 in the Report Viewer.If I click on the button "Report 2" it should display Report 2. Is this possible ? If yes then please provide the code.
EDIT 1 : I tried it like this, its not working
frmReport.ReportViewer1.Reset()
frmReport.ReportViewer1.LocalReport.ReportEmbeddedResource = "sdvsdf.Report1.rdlc"
frmReport.ReportViewer1.RefreshReport()
Within vb.net we've got a report that works great it has it's header/footer details then then a table in the middle which repeats data and all of that is fine.
But what the client wants now is for another button named 'Print Individual' and this will print the same report but instead of the repeated data within the table for each of those rows to be a single row on a page with the same header/footer.
So for example on the first report if there is one page with 5 rows of details the 'Print Individual' report will print the same but have 5 pages and 1 row per report.
Obviously if I can do it where we use the same report instead of maintaing two reports would be good, as the report has a lot of information on it.
Within vb.net is there a way I can dynamically create multiple reports using the same rdlc but with different SQL statements.So in essence I want to write a loop that will open the same report multiple times within the viewer which will end up having many pages..
View 1 RepliesI have a "MicrosoftReportViewer" on a form and a Combo box that lists the available reports (which will end up being dynamic in the end).
When the use selects an item from the list, the system loads up the correct report (populating any datasets needed) and then displaying it.Thing is, I can't get the viewer to change the displayed report, it just refreshes the first loaded report.
As you can see from the code below, there are two reports set up. I can get either one to be displayed if you select it first, sadly you're then stuck with that one!Currently they both use the same datasouce, so no need to mess about with that.
Private Sub ComboBox1_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ComboBox1.SelectedIndexChanged
Me.viw_ShowAllRepairsTableAdapter.Fill(Me.RepairsSystemDataSet.viw_ShowAllRepairs)
[code]....
This just loads up the report that the viewer has set as the default, reguardless of the report selected!What am I missing? There should be a way to change the report being viewed and I don't really want to be having multiple viewers just to house multiple reports?
I have created several reports without an issue. Though if I use interactive sorting with a report that has 2 fields in the document map properties under edit details group like the following : =Fields!FirstName.Value &" " & Fields!LastName.Valueeverthing populates as it should when I open up the report.If I click the sort button on the repoprt I recieve the following error : An error occured during local report processing. An error occured during report processing. An Internal error occurred on the report server. See the error log for more details. I would like to sort the fields in the report.If I have 1 field in the document map properties there are no issues.
View 3 RepliesThese things look about the same to me. Is there any reason I should use one over the other?
View 5 RepliesI have to prepare about 125 or 150 Loading Slips for various Mines to move carting to our various Factory daily into Windows Form of ERP System.
Just like here: Date:18-12-2011, Requirement No.001/11-12, Mines No.OP-128, In Charge Name: Karsanji Plot=0,Satta=0,Dump=6, Transporter:Ghanshyam Roadlines Destination:Madhapar Here Some Button to generate/modify records: Add,Edit,Save,Delete,Previous,Next,etc If I distribute 15 trucks for Ghanshyam Roadlines to move carting from OP-128 to Madhapar then I will have to entry 15 times into Windows Form of ERP System for creation loading slips numbers from 1 to 15. Here all my data to input 15 times into ERP is same, so why is it not possible to create multiple reports with single entry form?
I am trying create a multiple reports using a single report viewer. can this be done, if yes can u give me a clue on hw to go on about it. i have done everything its just the part of having multiple reports
View 11 RepliesI have 2 or more reports and I want to be able to open them in a single report. Let's call it the master report. In this report I want to open several reports, that are independent one to another. I'm using this code to generate the raports:
Dim crDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
Dim cmd As New OleDb.OleDbCommand
Dim da As New OleDb.OleDbDataAdapter
Dim dt As New DataTable
[code]....
With this code I rewrite the datasource of the raport, and I can filter the query by the 'param' variable in the query.After setting the datasource of the report i can save the raport:
crDocument.ExportToDisk(CrystalDecisions.[Shared].ExportFormatType.RichText, "C: emp.rtf")
into rtf, pdf, etc. I want to append more of these reports into a master empty report. Or load these reports as subreports into a master empty report.
Possible Duplicate: Crystal Reports vs ReportViewer Pros/Cons? what is the difference between MS Report Viewer and Crystal Report Viewer? I need to display some basic info. from my database and donot want to install any additional programs on client's computer to run the report.
View 1 RepliesI am currently having a headache on how to solve this problem that i am facing.here is the situation:I have a combobox and a list box on the main form. The combobox will get the data from the ms access database.In the database, i have the details of a person's IC, Name and DOB say for eg on one entry I have D215311523C,SHAWN,13/04/1987
So now, my combobox on form load will show the list of dates in the database to allow the user to search base on the date itself by clicking on the selected date. So when the user clicks on the particular date say 13/04/1987, people in the database whose birthday is 13/04/1987 will be shown on the listbox.Meaning to say if i have 3 entries whose dates are the same 13/04/1987, 3 entries will appear. If there is only two entry, then two results will be shown.
[Code]...
is it possible to have a single report from two different tables? Because I have been reading articles that are saying that it is not possible and a subreport should be implemented? Can anyone clarify this for me?
I've been retrieving the fields that I need for my report with inner join sql statement and setting it as the data source of the report that I had created but it doesn't show up when the crystal report viewer is loaded. I had the correct syntax based on testing on what is retrieved by the statement, the only problem is how should it be shown in a single report.
I am using a Crystal Report in my application to display an Invoice. For this, I take the 'Invoice No' as input from the user. I was wondering if I could display multiple invoices on different pages of the report by taking 'From Invoice No' & 'To Invoice No' as input form the user.
View 6 RepliesI have tested my code in order to pass single value to single parameter field in crystal report from VB.NET Form, it is ok but the problem is that I want to pass multiple values to only one parameter field called "Product Name" and it displays only one last record.
I want to display like this
Receipt : 0001 Product Name
pencil
pen
stamp
book
[Code]....
I already set parameter field "productname" for allowing to multiple values, but it is still the same.
When i pass the parameter and run the report it works fine as i close the form it closes the form is there any way so that i should be able to close the crystal report viewer and pass the parameter again and should be able to view report again.
View 1 Repliesi have tride to generate report by using in built functions of report viewer. but it disply only the default color in to the legend. in my report i am showing chart report by using student marks and their name. the chrt bar color get changed as per the students marks means if student is pass then the the report bar display with green if failed then with red color i want to show the legend with student pass and fail status but on my x axis i have given a only a marks column value and it s showing only marks lable in legend but i want to show it with their status means pass with green color and fail with red color if anybody have the answer of this query plz reply immediatly
View 1 Repliesi want same custom header on every page when i print my report, how can i?
View 3 RepliesI want to know how to create a report in vb.net 2005 through report viewer control
View 3 Replieshow to create a report in VB .net 2008 using microsoft report viewer?
View 2 RepliesI am working on a windows application in VB.Net 2008. I have added a crystal report in my project. and I have draw a Crystal Report Viewer to view the report. But when I run this report It asks user name and password. (The snapshot is attached here) I have used the following code to set the log on info of report.
[Code]...
I am trying to make a list, separated by a comma, of entries from a single column in a SQL database. I have been spending the last several days searching for a way to do this, but every thing I found either didn't work, or wasn't exactly what I was looking for.
The query will pull all the email address that are not null. What I need to know is how to take the result of that query and make it look like this:
email0@address.com, email1@address.com, email2@address.com, etc, etc, ...
I feel like I should know this, but for the life of me, I can't remember nor can I find it in any of the textbooks I have.
I am using Visual Basic 2010 and SQL Server 2005. I also have access to Visual Basic 2005 if needed.
in my app, I want to use reports. It's a long time ago, when I created my first report and that was in vb6. Now, I would like to use the report viewer control and the reports, created in vb.net. I use postgresql database with an ado.net connector (also I have dataadapters, datasets, datareaders, etc). I created a form and placed a report viewer on it and I added to my project the first empty report too.
[Code]...
beginner new programmer how do i make a report in visual basic 2008
View 3 RepliesI am trying to write a report in the report viewer. I want to be able to show in a text box what the ranges are for the report. for example i have a start and end date. I want to display the start date in one text box and display the end date in anothor text box.
View 1 RepliesCurrently I'm working on a piece of code that involves using the Crystal Reports Viewer to export .RPT files to PDF. My problem is that the code works on literally everything except the website I'm planning to eventually put it on.
When placed on the website it throws back the error "Failed to open the connection." which I believe is connected to the SQL Server connection that's formed in order to read data for the report itself.
The code itself is solid and works when used in a separate console application I built to test it whether said code is run on my local machine or on the server itself. It even runs when I test the website in Visual Studio's virtual host.
I've narrowed it down to being some sort of permissions issue, but I am not knowledgeable enough in the various permissions settings to figure out which ones specifically apply to this situation. It's worth mentioning that other pages on the website are directly connecting to the same database, but they are doing so directly through Linq instead of going through the Crystal Report Viewer.
So does anybody know which settings I need to modify in order to fix the connection error.An added note: One of the other suggestions is to make sure there's an ODBC DNS in place that matches the one being used by the code. I have created such a DNS already.
I want to show report in the report viewer.how can I do that programaticaly.not with the report wizard or just selecting data source report from the report viewer.
View 1 RepliesI created a report using report wizard. I placed the report in ReportViewer1. I Have a button that searches a particular query and returns the result to the report-viewer table. But the problem is, each time i click on the button, the old data in the ReportViewer1 table doesn't get cleared for the new query result to come in. All it does is append the new results to the old.
[Code]...
I have an app where it loads the image to a pic box from a path that is stored in an Access database. The image itself is not stored in the database. I have searched everywhere for a solution to get the image to load to the report viewer but so far just get the red X.
[Code]...
I have a ReportViewer control that the users can export to excel, and I'm looking to prevent the Excel Export error if a report is over 65536 rows rather than catch them after they occur. I am having trouble finding the row count that would be exported, does anyone know how this might be done?
View 5 Replies
