I am trying create a multiple reports using a single report viewer. can this be done, if yes can u give me a clue on hw to go on about it. i have done everything its just the part of having multiple reports
View 11 RepliesWithin vb.net is there a way I can dynamically create multiple reports using the same rdlc but with different SQL statements.So in essence I want to write a loop that will open the same report multiple times within the viewer which will end up having many pages..
View 1 RepliesI have 2 or more reports and I want to be able to open them in a single report. Let's call it the master report. In this report I want to open several reports, that are independent one to another. I'm using this code to generate the raports:
Dim crDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
Dim cmd As New OleDb.OleDbCommand
Dim da As New OleDb.OleDbDataAdapter
Dim dt As New DataTable
[code]....
With this code I rewrite the datasource of the raport, and I can filter the query by the 'param' variable in the query.After setting the datasource of the report i can save the raport:
crDocument.ExportToDisk(CrystalDecisions.[Shared].ExportFormatType.RichText, "C: emp.rtf")
into rtf, pdf, etc. I want to append more of these reports into a master empty report. Or load these reports as subreports into a master empty report.
I tried myself a little with VS Report Designer and it all went well apart that I'm having trouble to display 2 reports in one Report Viewer (Not two reports in the same time :P).Here a little info on what I'm using I'm using two dataset witch i feel with information through my functions.Until know if i select the report manual on the control properties it works well but only that single one.[code]but i doesn't work for me uuu one think you also should know is that I also use Parameters with i pass to the report, which works great on an single report.
View 2 RepliesI want to create Reports using ReportViewer.
I tried and could able to achieve it by adding dataset and data-tables to the form.
But i want to add it using datasets.
Not sure if this is an IDE issue or General VB issue, but its my best guess ;)
I have installed the ReportViewer with SP1 as recommended by this page: [URL]. I am running VB Express '08.
I added ReportViewer into my toolbox. I opened a new form and dragged the ReportViewer on to the form. I set Dock to Fill Clicked on Create New Report in the Quick Tasks
Nothing happens...
Searched for a few hours and read a ton of stuff from '06 through '09 and it seems I could not find an answer to this problem... Something about Express not having a report deisgner maybe? I have the SQL Buisiness Intel Studio installed and can design reports in there all day long. I was hoping that I could use this report viewer/designer to access similar if not the same reports in my local application project. My application will be based on a local SQL Exp. db as the data source and I am trying to avoid buying anything.
Within vb.net we've got a report that works great it has it's header/footer details then then a table in the middle which repeats data and all of that is fine.
But what the client wants now is for another button named 'Print Individual' and this will print the same report but instead of the repeated data within the table for each of those rows to be a single row on a page with the same header/footer.
So for example on the first report if there is one page with 5 rows of details the 'Print Individual' report will print the same but have 5 pages and 1 row per report.
Obviously if I can do it where we use the same report instead of maintaing two reports would be good, as the report has a lot of information on it.
i want to know is it possible to bind my all crystal reports to a single reportviewer, somewhat in tabbed view or treevie. If tabbed then visible through navigation button.
View 2 RepliesIs it possible? I just want to reuse ReportViewer control to show a different report one at a time.
Can someone show some code snippet about it?
Where can I find resources on authoring Reports. Say, I have a VB project and I want to add reports to it, do I have to add a ReportViewer for each report or can I use one ReportViewer for all?
What is the difference between a Report created using the Report Server Project of the Business Intelligence Projects and one created using the Visual Basic/Reporting Project tab? Which one is more suited for creating reports?Only performance counts!
I'm running CR XI, and accessing .RPT files through a ReportViewer in my ASP.NET pages.I've already got the following code, which is supposed to set the Report Datasource dynamically.
rptSP = New ReportDocument
Dim rptPath As String = Request.QueryString("report")
rptSP.Load(rptPath.ToString, 0)
[code].....
I have to prepare about 125 or 150 Loading Slips for various Mines to move carting to our various Factory daily into Windows Form of ERP System.
Just like here: Date:18-12-2011, Requirement No.001/11-12, Mines No.OP-128, In Charge Name: Karsanji Plot=0,Satta=0,Dump=6, Transporter:Ghanshyam Roadlines Destination:Madhapar Here Some Button to generate/modify records: Add,Edit,Save,Delete,Previous,Next,etc If I distribute 15 trucks for Ghanshyam Roadlines to move carting from OP-128 to Madhapar then I will have to entry 15 times into Windows Form of ERP System for creation loading slips numbers from 1 to 15. Here all my data to input 15 times into ERP is same, so why is it not possible to create multiple reports with single entry form?
Can you look at my coding and let me know what I'm missing or doing wrong?I have a SSRS report that is called from a ReportViewer control and the ProcessingMode for this control is Remote. The report also has 1 parameter in it's DataSet.In the code I placed a MsgBox to make sure the code is finding the parameter and returning the parameter name. I am trying to stick the value of 10 into the parameter for playerID 10. Data for this player does exist.
I believe I need to add some more code to make this work but I'm not sure what else to add.
When the code executes the report is displayed but no data is shown in the report.
[Code]...
I am trying to display a report in a ReportViewer. I am using the BindingSource component in which I specified my Data Source. I set the Data Source Instance to the BindingSource. Both Data Source and Data Source Instance are visiblein the ReportViewer Tasks.
However, I keep getting the following error message: An error occured during local report processing. An error has occured during report processing. A data source instance has not been supplied for the data source...
I want to create a report in Reportviewer in Visual Basic .Net (2005). This report generates a list of Userid's but I want the user to enter a userid group which it should display only the users within that group.
I created a View in SQL 2000 and also a stored procedure. The code for my stored procedure is described below
CREATE procedure dbo.display_users_summary
@user_ccsm smallint AS
set nocount off
[Code]......
I am using VS2010. I am trying to make reports using Report Viewer. This is how I have arranged my fields (using Table).
I want to make it look like this
I am using the vs2008 ReportViewer control, and I'd like to filter the date range on the report by selected it from (2) DatePicker controls. There are a couple of ways to do it I'm sure, but I would like to write the filter as an expression in the reportviewer designer. How can I target a control(s) on my form to filter the expression through?
View 2 Replieswhich contains a combobox with two Gender options, Male and Female. When the form runs the user can select either male or female to perform a query. I made the ComboBox public and shared so that it can be viewed by other forms. On another form i added a ReportViewer and a dataset based on my database (MS Access 2007 database with 1 table named tblStudents). I don't have any problems when i try to run a simple query without parameters, but there is a problem with my
View 13 RepliesThe report sits on the Report Server and requires ONE parameter "GROUPNAME". my code gives me a cast error when I try to set the parameters.
Imports Microsoft.Reporting.webforms
Partial Public Class _Default
Inherits System.Web.UI.Page
[code]....
I have a report viewer that i would like to display different data in depending on the report button that the user clicks. The data is stored in access databases. I am able to retreive the data and display the initial report but i have not been able to change the report/data that is being displayed.
View 1 RepliesI am having trouble loading and displaying my .rdlc report file in my reportviewer. I've been all over the internet and nothing worked.I think it might be because i am using vb.net 2008.Also I am wondering if there is a click event in Microsoft Reports or in Crystal Reports where I can link certain data in my report to other files in my project, eg. form2.vb
View 1 RepliesI need to know if the report displayed in the ReportViewer control was printed by the user and on that basis to maintain a log of printed documents. Originally, in VB6, with ActiveReports performed it with a very simple instruction:If Me.Printer.Status = ddJSCompleted Then...
I can not find a similar property in ReportViewer. Is there any way to tell if a document was printed?
I am having trouble loading and displaying my .rdlc report file in my reportviewer. I've been all over the internet and nothing worked.I think it might be because i am using vb.net 2008.
Also I am wondering if there is a click event in Microsoft Reports or in Crystal Reports where I can link certain data in my report to other files in my project, eg. form2.vb
I have the paths of my *.jpg images saved in my database.
I want to load the images into a image field in my report. I cant get this to work.
I am trying to create a report that will give me the area of multiple polygons on a layer. There will be an unknown number of layers and polygons. I was thinking I could use a multidimensional array with each row holding the layer name and the area of that polygon then loop through and separate the layers and sum the areas. My problem is that in all the reading I�ve done on the subject I�m not sure of how to initialize the array.
View 6 RepliesHow to use multiple rdlc file in one ReportViewer? in same dataset using visual basic 2010
View 1 RepliesI want to know how to generate pdf file with help of ms report viewer. I will pass needed parameter to that reportviewer that should generate pdf, it should be done at back side user should not know this(invisible mode).
View 1 RepliesI have a "MicrosoftReportViewer" on a form and a Combo box that lists the available reports (which will end up being dynamic in the end).
When the use selects an item from the list, the system loads up the correct report (populating any datasets needed) and then displaying it.Thing is, I can't get the viewer to change the displayed report, it just refreshes the first loaded report.
As you can see from the code below, there are two reports set up. I can get either one to be displayed if you select it first, sadly you're then stuck with that one!Currently they both use the same datasouce, so no need to mess about with that.
Private Sub ComboBox1_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ComboBox1.SelectedIndexChanged
Me.viw_ShowAllRepairsTableAdapter.Fill(Me.RepairsSystemDataSet.viw_ShowAllRepairs)
[code]....
This just loads up the report that the viewer has set as the default, reguardless of the report selected!What am I missing? There should be a way to change the report being viewed and I don't really want to be having multiple viewers just to house multiple reports?
In vb 6.0 I can create I data report by using data environment of the project properties.I woul like to ask if how can I create something like that in vb.net. The reports that will be viewed will be printed if the user want to.
View 3 RepliesAfter reserving a ticket for an travel agency, I want generate a printable report using Crystal Report.
View 1 Replies