Create Multiple Reports With Single Entry Into Form In VB2005?
Dec 13, 2011
I have to prepare about 125 or 150 Loading Slips for various Mines to move carting to our various Factory daily into Windows Form of ERP System.
Just like here: Date:18-12-2011, Requirement No.001/11-12, Mines No.OP-128, In Charge Name: Karsanji Plot=0,Satta=0,Dump=6, Transporter:Ghanshyam Roadlines Destination:Madhapar Here Some Button to generate/modify records: Add,Edit,Save,Delete,Previous,Next,etc If I distribute 15 trucks for Ghanshyam Roadlines to move carting from OP-128 to Madhapar then I will have to entry 15 times into Windows Form of ERP System for creation loading slips numbers from 1 to 15. Here all my data to input 15 times into ERP is same, so why is it not possible to create multiple reports with single entry form?
I am trying to create a form which will be fed by an underlying database to create multiple form fields for each entry in an underlying database table. This is for a program to monitor patients under anesthesia, and prior to surgery, the doctor will choose which monitors they will be using. Then, on the actual monitor screen which will pop up every X minutes, there will be a text box and a check box for each chosen monitor. I am relatively new to VB, so I have tried to illustrate what I am needing but using the logic that I know from my previous life in PHP.
I am using DevExpress's layout control to place the form fields, so that is the code in the middle of the first loop (on_load), and I know that part works, I just need to know how to name the fields and then recover those fields and commit the values to the database. (the text boxes are added to the database, the check boxes are used to determine if an entry is made for that monitor- i.e. at the end of surgery if a monitor is turned off). I know that my syntax for naming the fields is no where close to correct, and it probably would not work in PHP, but I remember doing something like this in a PHP application I built long ago. [Code]
i want to know is it possible to bind my all crystal reports to a single reportviewer, somewhat in tabbed view or treevie. If tabbed then visible through navigation button.
I am trying create a multiple reports using a single report viewer. can this be done, if yes can u give me a clue on hw to go on about it. i have done everything its just the part of having multiple reports
I have 2 or more reports and I want to be able to open them in a single report. Let's call it the master report. In this report I want to open several reports, that are independent one to another. I'm using this code to generate the raports:
Dim crDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument Dim cmd As New OleDb.OleDbCommand Dim da As New OleDb.OleDbDataAdapter Dim dt As New DataTable
[code]....
With this code I rewrite the datasource of the raport, and I can filter the query by the 'param' variable in the query.After setting the datasource of the report i can save the raport:
64-bit Windows 7 Profesinoal running a project I have done vb2005. Reporting as a tool I'm using active reports 2.0. Normal data base connection is very slow. The first problem this.The second problem, none of my reports does not work. gives the following error:is not a valid Win32 application.
I am using vs2005 for developing one project..i have to find Total amount for each page report ( using crystal report and report viewer ..and the report have AMOUNT coloum to display amount) programically..
Using this tutorial How Do I: Create a One-to-Many Data Entry Form? as a reference Suppose I have a parameter query called FillByStatus in my "Customer" DataTable and I want to fill the CustomerTableAdapter On Form_Load using this query. So I can do that by using the following
Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) _ Handles MyBase.Load Me.OrdersTableAdapter.Fill(Me.CustomerOrdersDataSet.Orders) Me.CustomerTableAdapter.FillByStatus(Me.CustomerOrdersDataSet.Customer, "Active") End Sub However, when I do that my related DataGridView (orders) is empty, how do I make it so that doesn't happen?
I am developing a program and stuck up with an issue. I am able to enter single value in MSAccess database however, when I create a programe to enter multiple entries I am getting an error. developing a code to enter multiple entries in MSAccess 2002 db with the help of VB based form?
I Following code I am using for single entry:
Private Sub Button1_Enter(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Enter Dim query As String
I am trying to create a small form that will duplicate a users entry for them.On my form i have a text box and two CheckListBox controls and a button. The user should be able enter a value into the text box, and select multiple items from both CheckedListBoxes, when they click the submit button the details will be added to a DataGridView below.
This is an example,The user enters the value Audi A4 into the textbox.
The First Checked Lsit Box is called "Colour" and from the options the user checks 'Red' and 'Blue'.
The second Checked List Box is called "Number of Doors" and from the options the user checks '3' and '5'.
When the User clicks the submit button 4 rows will be added to the DataGridView with all the different combinations, as shown below:
Model Colour No# of Doors Audi A4 Red 3 Audi A4 Red 5 Audi A4 Blue 3 Audi A4 Blue 5
I am currently using this to populate the DataGridView:
I've written an application with about 30 forms and am almost ready to publish, my biggest concern though is that i'm not sure if its a normal thing to do having all these forms and hiding, disposing and showing forms throughout the use of the application.I've toyed with the idea of converting to a MDI Child / Parent interface as well as having one form with lots of subcontainers that are hidden and then hiding / showing them as the navigational buttons are shown.Ive worked on this application for about 8 months now, but would be happy to rewrite the interface and appearance of it if i know that it is not generally an acceptable practice having forms flashing open and closed while navigating through the application.
I have a form which displays temperature and humidity data for a device in the field. I have multiple devices. Rather than creating a separate form for each device, obviously it is much better to have a single form that I instantiate, pass data to, and display. The devices are listed in a treeview, and when the user double-clicks the node, I create an instance of the form, pass the device's data to the instance of the form, and display the form. All of this works perfectly. However, I have a challenge: If the form for a particular device is already open, I don't want another one opened when the user double-clicks the node.
However, whenever I place logic in the program to check for the existence of the form and only allow another instance to be created if one doesn't already exist, it prevents me from creating a form instance for any other device that I may wish to view, simultaneously. So, I have a dilemma -- allow the user to display the data for multiple devices, including allowing multiple forms to be open for a single device, OR only allowing one device to be displayed at any given time.
I've got two sets of lists with nearly 800 items that I need in 32 different drop down comboboxes (before you ask, that is required and it can't be simplified). Understandably, populating each of them slows down the creation of the form. This happens to be a child form that these drop downs are on and there could be more than one child form displayed. I've assembled the lists in List(Of String) objects and set each of the datasources of the comboboxes appropriately, but it still takes several seconds for them to populate and display for the first time. This is also problematic if the datasource gets updated (items removed, added, renamed) because I have to wipe out all the items and create the list again in all active instances.
I created several Reports in Visual studio. and now I would like to create a form with buttons that open the reports. I have been searching for the code to open a report but cannot find anything useful.
Do I have to add al the Report projects to my ReportForm project or...?
After making the changes or adding a record I use invoke childmethod from my toolbar to call these subs. The first table updates and adds, but the second does not. I have set all of my textboxes databindings and double checked them. I get no error, but it does not update the second table. What am I doing wrong?
Public Sub AddRecord() 'Clear out the input data fields on a new Add. ClearInputFields()
Say I have a code with 3 methods that do some pretty intensive work. Would executing these methods on 3 seperate threads be faster then executing them one after the other on a single core cpu? And what if it's a dual core or HT?
I use VB and Active reports to generate reports. Now I need 4 reports to be generated on a single 8.5 x 11 page in a 2 by 2 =4 format. Active reports does not have any such property thus this has to controlled through vb.How it can be done through vb?
i connect database with vb.net and also i receive a single value from my receiver through serial port. now i want to match this single data with one field of database. i have attached my code.
Public Class Form1 Private Sub OPEN_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
I am working on DataEntry Forms in VB.NET There are two controls are having in a present window. One is Combobox and one is Textbox. Combobox values are Mobile, FAX, E-mail. By the mistake some one enter the values like , In the combobox-E-mail and in the Textbox-9987453434. Finally these are saved on the Database. But i want to Re Enter the values.
For this i was selected in the Combobox-Mobile and in the Textbox-9987453434. These are the right values i want to save on the database.
But here the problem is that Phone number column(Textbox) is Indexed. (Unique) or No Duplicates in the database. Now i want to update only one column which is coming from Combobox in the database.
How you might construct an array like the following: one column or entry would be a single integer, like 0, 1, 2, 3, 4... - i need this as an index of each one's position in the list the second would be 0 or 1, or true or false the third would itself be a list of integers 0,4,5,2,7,2,5,2...
So all together one entry would be {0; 0; 0,4,5,2,7,2,5,2} while the next might be {1; 0; 6,8,2,5,2,3}
I'm having a terrible time wrapping my head around this. It's mostly the third column which is actually a list in itself, that is giving me trouble
Is it possible to display different with a single a report viewer such that when I click on the button "Report 1" to should display Report 1 in the Report Viewer.If I click on the button "Report 2" it should display Report 2. Is this possible ? If yes then please provide the code.
I created a SQL database using the migration tool.I am converting my access forms to VB.net (VS2008).I am wondering if I create a single dataset in studio to the database or do I create a dataset for each form (query)? I am trying to determine what the best solution is. Many of my forms have drop downs that are populated using queries from tables.
Currently we are using a VB script macro created in word to create some fairly simple forms based off of data entered on a data entry form. I am very new to VB, and I have been able to create many applications using forms, but I have absolutely no history creating reports. I have been reading up on the reports, and it looks like they are designed to use with data sources like tables. I merely want to take either data from the entry form, or from data derived internaly from processing the user entered data and populate a defined report "form". I have been searching, but there is so much on printing reports, that I feel overwhelmed. I am not looking for the exact answer as much as a link or place to look for a sample for what I want to do.
I have created a windows form with a crystal reports viewer, a combo box to select a report to view, and a button that I would like to (Print All Reports). The print button in the viewers toolbar will print the report currently being viewed. I want the button in my application to print all the reports without viewing them.
I have following code, but it throws an exception of type 'CrystalDecisions.Shared.CrystalReportsException' occurred in CrystalDecisions.CrystalReports.Engine.dllAdditional information: Load report failed.
Is there an easy way to add more than the default icon to a project, giving the user a choice when Create Shortcut/Change Icon is used?I can find nothing recent on this anywhere.
I'm trying to create a control array in VB2005. As I've said in other questions, I've been working in VB5 for a good while but I'm new to VB2005. I know how to set the array up in VB5 but it doesn't work in VB2005. I tried some code that someone told me about, but it's not working. I have several books on programming VB2005 but
