Divide An Array Into Small Arrays?
Apr 11, 2009How do i divide an array into small 5 arrays.it is a byte array
View 2 Replies
ADVERTISEMENT
Using Arrays To Store And Divide?
Nov 8, 2008i want to store the employees quarter sales and at the same time i want them to average with the companies quarter sales any ideas?
[URL]
Code:
Const intNUMBER_OF_EMPLOYEES As Integer = 10
Const intMAX_EMPLOYEE As Integer = intNUMBER_OF_EMPLOYEES - 1
' class level variables
[code].....
Arrays In A Small Application?
Mar 16, 2009I'm having trouble getting started with this application I need to do. Here are the details:
Its an application to calculate student grades for a group project. Create a text file to store names of 5 students, line by line. In a separate file enter peer evaluations from 0 to 1.0. Enter these numbers for evaluations:
1.0, 0.8, 0.9, 1.0, 0.6
0.2, 0.9, 0.5, 0.6, 0.7
0.5, 1.0, 1.0, 1.5, 0.9
0.9, 0.9, 0.9, 1.0, 1.0
1.0, 0.9, 1.0, 0.8, 0.9
This means that student 1 gave 1.0 evaluation for himself , 0.8 for student 2, 0.9 for student 3 etc.Student 2 gave 0.2 for student 1, 0.9 for him- herself, 0.5 for student 3 etc. Read these into a 2-dimensional array. If any of the values is greater than 1.0, set them to 1.0. The program should calculate the average evaluation for a student. While doing so, the program should ignore evaluations that student gave to him-herself. Populate a list box with student names when the form loads. The user should enter a project grade (same for everyone) in a textbox. Then the user can select a student from a list and click �Calculate� button. The program should display the project grade for that student by multiplying average evaluation by the grade for the whole group (project grade).
Way To Keep These Arrays As Small As Needed While Being Able To Add New Elements On Fly
Apr 30, 2009I have 3 arrays setup for use in my program. The first array has item level detail and will have a known number of elements. The second array has more of a table level detail and will have an unknown number of elements that will need to grow as the user enters data The 3rd array will also be of unknown size but matching the second array and will be used for indexing purposes at runtime.The question is what would be the best and hopefully fastest way to keep these arrays as small as needed while being able to add new elements on the fly without rebuilding the entire array. Ideally I would like the code to run as fast as possible in as little memory as possible.
View 9 RepliesVS 2010 Form A Code For A Small Arrays Manipulation?
Dec 25, 2011I need help to form a code for a small arrays manipulation. The input data are known: they are two integers "N" and "s". An integer "N" is always divisible by 4.I need to create an array of "N" members, by repeating (N/4 times) this sub-array: 1,2,2,1 (always is the same). In the picture, this is shown in blue. Then I need to add the same array to the existing array, but shifted for "s" places (red array). The result is "yes" if each sum in new columns is always the same (3). Otherwise the result is "no." note there is no need to draw or display something (DGV, table ...). The required result is only "yes" or "no".
View 8 Replies.net - Combining Array Of Arrays Into Single, Distinct Array Using LINQ
Apr 19, 2011Can this be rewritten any better using LINQ? I'm a C#er trying to think in VB.NET for this current project. It's in an ASP.NET Web Forms .vb codebehind:
Public ReadOnly Property AllowedCategoryIds As Integer()
Get
Dim ids = New List(Of Integer)
[Code]....
VS 2008 : Small Code For Array/dictionary To Pullout Data Conditionally
Sep 29, 2010I need small code for array/dictionary to pullout data conditionally.i have data:
oid----opriority----task
10--------3-------Task1
5--------1--------Task2
1--------6--------Task3
i need to build one array/dictionary to store the data in this format then i can pull the value like.
select oid where task = task1 order by opriority
It is easy for me do in database table, This is run time and i need to work in RAM. how i can build the array and pull the data accordingly.
SQLDataReader - Creating A Small Program To Read From An SQL Server, Loading Result Into An Array
Nov 15, 2011I'm creating a small program to read from an SQL server, loading result into an array, pivoting the array to my liking and mailing it out to selected members of a group. It's going to be run once a day with Windows schedule. I have the connection, query and mail sorted, but not the datareader to array bit.
(line 26)?
Imports System.Data
Imports System.Data.SqlClient
Imports System.Net.Mail
[CODE]...
Make A Small Program For Ticketing On A Parking For A Small Hotel?
Aug 27, 2010I need to make a small programm for ticketing on a parking for a small hotel.So i have 2 Printers pariking In (for delivery of the tickets) and 2 Readers PArking Out.Both Printers and REaders are working Serial.So i need to poll the serial ports of the printers and readers every second.The data is stored on a SQL database so i need to read and write in the database.Can i do this with 1 PC and 1 programm or 1 PC and 4 programms that are runnning at the same time ?
View 2 RepliesCreate A Small Application That Can Make Small Calculations?
Feb 1, 2010On form 1 , i have a number of buttons that open up different websites.What i want to do is when i click a button on form 1 , i want forum 2 to show ( Form2.show() ) , Form 2 will have a list (Buttons) of internet browsers.
View 4 RepliesFor Each On Arrays Of Array Not Updating?
Aug 26, 2011I would like to update string arrays in batchlets say I have 3 string arraysI want to for example redim them and then up load them with data.I have tried for each on array of arrayI have tried list.at the end none of them are updated.
Dim Str1(10) As String
Dim Str2(10) As String
Dim Str3(10) As String
[code].....
Get A Value From Array Based On The Value Of Others Arrays?
Apr 6, 2012Supposed that I have two arrays:
Dim RoomName() As String = {(RoomA), (RoomB), (RoomC), (RoomD), (RoomE)}
Dim RoomType() As Integer = {1, 2, 2, 2, 1}
I want to get a value from the "RoomName" array based on a criteria of "RoomType" array. For example, I want to get a "RoomName" with "RoomType = 2", so the algorithm should randomize the index of the array that the "RoomType" is "2", and get a single value range from index "1-3" only.
Return Only 1/3 Of An Array From 2 1d Arrays?
Jul 10, 2011This is a school project, supposed to be a beggining VB.Net class. I'm having difficulty with one section, sorting the array is OK but I need to only return a 3 of it. I had it working when I was selecting single files but when I went to selecting multiple files at once the formula stopped working for me. I'm retuning the array just fine but the select a 3rd seems to just pass by without being acted upon. I've been working on this a long time and don't know where to look for an answer. Here is what I have for the sort method;
Private Sub sort()
Dim Count As Integer
Dim count2 As Integer
[code].....
Way To Have An Array That Holds Other Arrays
Dec 8, 2011Is there any way to have an array that holds other arrays in VB? So you could call it like Array1(Array2(0))
View 2 RepliesVS 2010 Array - Small Report Card Project - Pull 5 Students With Each Student Having 5 Test Scores A Piece
Jan 13, 2012I'm basically trying to do a small report card project. I only need to pull 5 Students with each student having 5 Test Scores a piece. The full Code of what I have for the submit button is below. I have actually 3 questions.
1. I always seem to have trouble with them unless I initialize them when I dim them. Is there a better way than below
2. The below code works really well for Student 1 and all 5 test scores. Rather than do that code 5 times though, what is the best way for me to basically state that IF dblStudent1(intMax) = 4 Then Change dblStudent1(intMax) to dblStudent2(intMax) etc.
3. Would this be better suited towards a multidimensional array ?
Private Sub btnEnterGrades_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnEnterGrades.Click
Dim strStudentNames() As String = {" ", " ", " ", " ", " "} ' Holds the 5 Students Names
Dim intMax As Integer = (4) ' Place Holder for Student Number
[CODE]...
Checking Arrays - Set The Corresponding Number In The Array
Dec 4, 2009I have an array for all 26 chars of the alphabet as a boolean. What I want to end up doing is have the program take the user's guess char and set the corresponding number in the array to true. I'm new to arrays and I have no clue how to begin doing this. this is how I am declaring my array. I am declaring the array as a char for now because I don't know how to go about using a boolean array for my game, but it seems like it would be the best way to do it. [Code]
View 2 RepliesCombine Two 1-D Arrays Of The Same Length Into One 2-D Array?
Sep 3, 2009how to combine two 1-D arrays of the same length into one 2-D array ?
View 7 RepliesCreate One Array From Two Other Arrays In Program?
Feb 20, 2012I have two arrays
a={a,b,c,d}
b={1,2,3,4}
now I want to create a 3rd array which should at least contains one numeric number and rest of alphabets, this code will generate unique usernames so it should not repeat the pattern of selection which is present in main array[code]...
Dynamic Array Of Byte Arrays?
Jun 24, 2009A project requires to allocate a varying number of byte arrays (buffers).
It would be ideal if the following definition would be possible:
Dim ArrayOfBuffers() as buffer(10000) as Byte
The byte arrays must be ordered sequentially because they have to be written to a file by efficient procedures destinationFile.Write(ArrayOfBuffer(3),1000,1000)
The number of buffers will change during program execution sometimes. Therefore it would be nice to be able to do a ReDim on the data structure when needed.
Why Are Array Initializes Only Allowed For Arrays
Mar 1, 2010This does not compile. Dim Tom As New List(Of String) = {"Tom", "Tom2"} This does Dim Tom As String() = {"Tom", "Tom2"} IMO this features should be allowed for all collection types and not only arrays.
View 2 RepliesControl Arrays - Fill Array With A Loop
Jun 17, 2009I am trying to port a program I wrote with old VB 1 and I have many control arrays in the program, and it was so easy to do this in older versions of VB, now I am trying to find how to do this and all the answers I have found are a major productions, to replace something that was so easy to do? I would think that microsoft would make programming easer with each new incarnation. instead they are making it harder. doing away with the DATA and READ statement, now it is much harder to fill an array with a loop, now you have to enter each item in an array ONE by ONE. they did away with the ON statement, I had several ON statements, I had to make complex Select case constructs. to replace a simple one word statement?
To make an array of controls in OldVB all you had to do is Name a Second control the Same as the First, and a dialog pops up and ask if you want to make an array, you click Yes, and that's it, what could be easier than this?
Create A Multidimensional Array That Contains Arrays Of Different Lengths?
Jan 1, 2011Is there any way to create a multidinensional array that contains arrays of different lengths (similar to nesting arrays of different lengths in python).
Because if I were to declare a variable Dim accounts(2,2) As Integer all 1D arrays at each dimension have the same length. Is there any way to create an array so that this is not the case?
e.g The above code would create an array like this:
[[0,0],[0,0]]
but would it be possible to create this:
[[0,0],[0,0,0]]
Initialize Arrays - Get Values For Array Elements
Nov 5, 2009How to get values for array elements in VB.nET from the user.also i wanted to display these values in the combo box.[this is easy i could manage this].
View 2 RepliesPass An Array Of Arrays As A Function Argument?
Nov 11, 2010I have several parameters consisting of separate System.Byte() arrays. What I need is the syntax for a function declaration where the parameter is an array of arrays - I do not want to delve into System.Collections, and it's my preference not to CType each array into an Object and then back into a Byte().
Problem I'm having here is that:
Public Function MyFunc(arrayparam() As System.Byte) As System.Byte()
accepts a single-dimensional Array of individual Bytes.
Then Public Function MyFunc(arrayparam() As System.Byte()) As System.Byte()
Split An Array Into Multiple Smaller Arrays?
Apr 9, 2010if its possible to split an array into multiple smaller arrays?
View 7 RepliesSplit An Array Into Two Smaller Arrays At A Given Index?
Mar 4, 2012I want to split an array into two smaller arrays at a given index?
View 5 RepliesVS 2008 String To Array & Searching Arrays?
Dec 17, 2009I have 2 groups, the information i get comes out as follows.
Dim group1 As String = "3 4 7 8 10"
Dim group2 As String = "0 1 2 5 9"
The placements are predetermined, so when the first perso
[code].....
Get The Correct 1 Dimensional Array Return From A Function With Arrays?
Nov 9, 2009 [code]...
Expected Results: A scalar result of the comparison between Array1 and Array2 such that when Array1>Array2 it is true. See expected array above.
Actual Results: When Result(x) is true, all elements become Array1(x) and Array2(x) .What is wrong with the function?
One Dimensional Arrays (accumulate The Value Of Each Item Of The Array) And Classes
Dec 12, 2010I have written a class for my one dimensional array The idea is to collect user information, put the info into an array and accumulate the value of each item of the array so there is a running total. The problem is that the code is not totalling the array when my btnSum is clicked or maybe at all. I am getting no errors, but I am also getting no total.
[Code]...
VS 2008 User Submitted Array - Swapping Arrays?
Apr 22, 2012Create two arrays, ask the user to populate them and display both arrays Swap the contents of the arrays using loops and then display the content.
What is the best method to have the end user populate an array? I am doing this as a windows form. Have multiple text boxes that they have to fill out? Set the elements of the array to the text box values? And how to swap the contents at run time is something I am not sure of. Isn't there a Array Swap function or something? Here is what I have so far:
Note: the bottom section was a test..and it isn't working as expected.
HTML
CODE:
