Double Buffering The Listview?

Oct 26, 2011

But this solution only seems to be good fo XP and does not seem to work in 2010 unless I'm running it in the wrong sequence.

Private
Sub Setup()
Me.SetStyle(ControlStyles.OptimizedDoubleBuffer,

[code]....

View 1 Replies


ADVERTISEMENT

Removing Flickering Without Double-Buffering?

Feb 22, 2011

I am having a similar issue with the double buffered set to true for a picturebox. I customized a picturebox control in vb.net where, a panel contains the picturebox.

Upon a mousedoubleclick of the picturebox, i scale the picturebox width wise a certain scalefactor, so that the picturebox is greater than the size of the panel. I am doing this for horizontal zooming and panning. With that said, the picturebox could become large in size.

At certain screensizes, after scaling the picturebox 6 times the size of panel, at fullscreen, i receive an error messsage implying "Not enough memory available to process the command."

However, when i turn off double buffered, i dont get the error, but i get much unwanted flickering.

Here is my code in the Paint Event:

Private Sub picPMGraph_Paint(ByVal sender As Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles picPMGraph.Paint
Dim i As Integer

[Code].....

View 14 Replies

VS 2008 Panels And Double Buffering

Oct 2, 2009

I'd like to set a panel to double buffered to prevent the massive flickering that I've got while I slide panels in and out of my form, but I'm not sure how to.I've Googled it, but all I've found is snippets of code which I don't know how to use. It involves something about creating your own class with double buffering enabled and then creating a panel from that class.

View 9 Replies

[2008] Getting Double Buffering To Work?

Feb 7, 2009

I'm having a lot of trouble getting Double Buffering to work for me. I've gone through about 30 sites but I can't seem to get it working for myself. I'm making a boardgame for a school project, and I have the characters (Who are just shapes with Happy Faces from the Visual Basic Powerpack OvalShape) and I have them moving with this

If intCurrentSpace(1) <> intTargetSpace(1) Then
intNextSpace = intCurrentSpace(1) + 1
Else

[code]....

View 7 Replies

Double Click ListView?

Jun 16, 2010

I have the following code which reads the first line first value of the list view and displays on the txtLoadRef textbox.

Private Sub lstvwpathist_DoubleClick(ByVal sender As Object, ByVal e As System.EventArgs) Handles lstvwpathist.DoubleClick
TxtLoadRef.Clear()

[code].....

View 6 Replies

Double Click On Listview Selected Item

Dec 12, 2010

Ive got a listview and when someone double clicks an item i want it to process some code unique to that item. Using something like 'Switch' would probably be a good way to go about this but i dont know how to do this.

View 6 Replies

Opening Listview Items With A Double Click?

Jan 10, 2012

I want to open items from a list view with a double click.

Imports System.IO
Imports System.Xml
Public Class cv7import

[code]....

That's the important part of the code, I was think of using onclick but I cant seem to get anywhere with it?I also considered using and Open File Dialog but I dont think it can be done without the user's input of a path?

View 1 Replies

VS 2005 Listview Filled As Double Items?

Feb 6, 2011

I have a bit of problem right here. I am using the timer to connect to my site and extract the info that come from an html tags name, so when I closed the dialog and reopen, it filled the listview items as double.

Here's the

Private Sub form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
ListView1.Items.Clear()

[Code].....

View 11 Replies

When The User Double Clicks On An Icon In A ListView

Dec 14, 2009

what the Equivalent is in .net of the following Event

Code:

Private Sub ListView_ItemDblClick(Item As ListItem)
End Sub

I need to know when the user Double Clicks on an icon in a ListView, there doesn't seem to be a matching event in .net.I'm running VS 2008?

View 3 Replies

Listview String Value Goto Combo Box On Double Click

May 2, 2012

i have hard codeded combo like this suppose i select not tolerated by pattient this is listview box and i want "not tolerated by pattient" back to combo box on double click to list view box

View 3 Replies

VS 2008 : Fire An Event When Double Clicking On A Listview?

Jul 14, 2009

I would like to fire an event when double clicking on a listview, but more specifiquelly in the blanck area (where NO item exists)I have read from this msdn page :

Quote: The mouse pointer must be over a child object (TreeNode or ListViewItem). how to fire the event another way ?

View 9 Replies

When Double Click On Any Row In Listview These Values Will Be Editable In The Textboxes Again For Edit Mod?

Feb 14, 2011

i have 3 textboxes and 3 columns in listview like names ProductCode, ProductName and Price. i save the textbox values to Listview columns.Now i want to that when i double click on any row in listview these values will be editable in the textboxes again for edit mod.

View 1 Replies

Winforms - Catch The Autosize Double-click Event On A Listview?

May 9, 2011

I am using Visual Studio 2008 and VB.NET. I've got a listview control on my form and I've added columns using the windows forms designer. As you know, if you double-click on the sizer or divider or whatever you want to call it between two columns, the column on the left will autosize (unless you disable that). How can I catch this specific event? The ColumnWidthChanged event and the DoubleClick event are likely candidates, but in the ColumnWidthChanged event, there's no way I can see to determine if it was an autosize. Similarly, there's no simple way to catch what was clicked exactly with the DoubleClick event. how I can catch this specific event type?

View 1 Replies

Buffering Writes The Serial Port?

Feb 21, 2009

Im trying to buffer data being written to a device on a com port. The equipment attached to it does not use any form of flow contol and if you write to much information to quickly it falls over. So I have had the following thoughts.

I would create a list of strings and when I wanted to write data to the com Port I would just add the string to the list. I would then have a Sub running its own thread to step through the list, write the string to the com port ,pause a fixed amount of time, remove string from list and repeat until the list is empty. Then keep looping the above.

Code I have so far is below

Private MsgList as new List (of string)
Private sub MsgPump ()
Do

[Code]....

THis does work but If I add strings to MsgList to quickly it throws an exception.

View 3 Replies

Buffering Using Ftpwebrequest - Allows Users To Login To The System

Mar 15, 2011

This will be my first post on this site, so I thought I would make it a doozy. I have an web application on our site at work that allows users to login to the system, and submit filings for dockets that our state agency governs. Without getting to involve with what that means, they basically upload mostly .pdf files, but there are others that are acceptable to upload as well. The current system that is being used, uses a simple FileUpload and saving it to a folder on the d: drive of the webserver. I ran into a problem that with anyone outside the building/network, the upload is extremely slow and seems to be limited files no larger than about 1.4MB. There have been a few cases where larger file have made it through, but those ar few and far between. I've tried a couple different 3rd party components, but seem to run into the same limits. So, I install the FTP server on the box with the IIS and am trying to go the FTP route using ftpwebrequest.

Below is what I have put together so far:

Imports System.Net
Imports System.IO

Partial Class _Default

[CODE]...

This seems to work as it is at the moment, but I know it has a long way to go for catch exeptions, speeding it up...

1.) The first problem I have run into is if you try to upload to large a file, you get Out of memory error. I'm needing to change the buffer so that it is buffering chunks instead of the entire file. I've googled over and over again and seem to find several good options in C#, but can't seem to convert them to VB. So, could some one give me some idea how to take what I have and change the buffering to use smaller chunks.

2.) I need to catch an empty UploadFile field.

3.) I will eventually be changing this so that it handle multiple file uploads like my current system uses. (Did I mention that I'm new to the ASP.NET and have been programming in .ASP)

4.) As you will notice from my list of acceptable file types, I might have a problem with some needing to be upload as Binary and some not. So I'm going to have to come up with a way to test and change the Requested.UseBinary = False as needed.

I'm sure that I'll find other items as I progress or the big bosses will find other things that they want to add, but for now.... I know that given enough time, I will get all of these items worked out.

By the way, we have a network adminstrator that leave a lot to be desired and most IIS and now FTP I'm having to learn, implement and configure. I'm wondering if there is anything else that could be causing these limits in file size. Since I've tried 4 completely different forms of uploads and they all seem to run into the same limits, I thought there might be something in a router, firewall, server configuration.... that I might need to look into as well.

View 2 Replies

Override Microsoft's Datagridview To Allow Back Buffering?

Sep 3, 2010

My datagridview flickers and is very slow while loading. I reflectored the datgridview from Microsoft and discovered that there is a back buffer property which is not visible from the winForm. How do I set this property?

View 4 Replies

Windows Media Player Buffering Status In VB.net 2008

Dec 24, 2008

Hi there..
Im hoping to update a label with the text "Buffering" and "Done" etc. according to the status of the Media Player i have embedded.

I can achieve this, but i do not know a way of constantly refreshing it so that the status is updated. Is there a way i can update it without the use of a timer?

View 2 Replies

Intercept Single Or Double Mouse Click - Only Execute Double Click Code On Double Click?

Jan 27, 2011

I have a situation where I am handling both single & double mouse click events on a form. In both cases something has to be loaded, however when a double click occurs, I do not wish to execute the code attached to the single click event.Is there a way to intercept the mouse click's and check if double or single and then execute the right event appropriately?

View 2 Replies

Flickering - Double Buffered Picturebox - Not Double Buffere - Black Screen With The White Lines

Nov 17, 2010

I have a htpc project that I am working on. The main program loads dll plugins which are basically other win forms. On each of these forms, including the main program, I use a picturebox (a double buffered picturebox) for the background image and then draw everything on it by hand. Whenever I load the form from the dll and show it, I get a weird flicker. It looks like it is the previously used double buffer. Is there any way to clear the background double buffer before the flicker? Or am I going in the wrong direction?

Here's a couple of videos of the problem:
[url]
[url]

Notice the black screen with the white lines on it or the flash of the desktop after I click "Movies." How do I get rid of that?

View 14 Replies

Use A Decimal Instead Of A Double (why Then Do Microsoft Use A Double For Most Math Class Functions)

Aug 15, 2011

For greater accuracy I should use a Decimal instead of a Double ( so I've been told ). Why then have Microsoft chosen to use DOUBLE for most of the functions that return a floating point value in the Math Class?

[Code]....

View 9 Replies

VS 2008 : Double Quotes Inside A Double Quote?

Apr 4, 2009

In vb.net, im using objWriter.Write("playerA= "x"")as you can see im using double quotes inside double quotes, how do i skip it so the error doesnt show up?in php you make an "" to skip the string like ("playerA = "x" ")

View 6 Replies

Double Click/Right Click ListView?

Sep 8, 2009

How would i make a ListView Do something when i double click it. And also how would i right click a listview and a menu comes down and the user selects what ever.how would do these in a listView?

View 4 Replies

Vb6 Double Versus .Net Double Data Type?

Aug 11, 2010

When i use VB6 i get the following outputs

961.605 * 100 = 96161
936.495 * 100 = 93650
929.295 * 100 = 92929

NOW..... When i do the above in vb.net 2005 i get the following

961.605 * 100 = 96160
936.495 * 100 = 93650
929.295 * 100 = 92930

How can i get the same output as the VB results. And i have tired it ! Type conversions, math functions, everything i can think of to get the same VB6 output !

View 8 Replies

Vb6 Double Vs Double Data Type

Aug 11, 2010

When i use VB6 i get the following outputs

[Code]...

View 1 Replies

Forms :: Double Buffer A Form, Aside From Setting "Double Bufferd" To True

Oct 27, 2009

I've asked this question before, and so have many before me, i have done extensive research on the topic and stil no help. Maybe this is some kind of secret info. shared only amongst top programmers. Bt how do you really, trully double buffer a form, aside from setting "Double Bufferd" to true, which doesn't work in most cases, I want to know how do companies lyk Microsoft and Symantec, prevent flashes on big applications such Word and Norton.

View 4 Replies

VS 2005 Display A Command Line Argument That Has Double Quotes Around, The Double Quotes Are Always Stripped Off?

Feb 23, 2010

If I try to display a command line argument that has double quotes around, the double quotes are always stripped off. How can I avoid this?

for example, the argument is "c:xx.txt" and this displays c:xx.txt instead Console.WriteLine((My.Application.CommandLineArgs(4)))

View 4 Replies

CSV File Parse - Double Quote Comma Double Quote

Mar 25, 2009

I have a CSV file where the values are in double quotes and seperated by a comma. I'm getting incorrect data if I try to seperate the string with my Split function. How do I do it?

Example:[code...]

View 2 Replies

Double If Statement - Getting Error "Conversion From String "frog1" To Type 'Double' Is Not Valid."?

Apr 12, 2011

I've been just making random programs trying to get the hang of the new language this time I was making a leap frog game where it switches back and forth beetween frogs every time a button is pressed. It also checks if the frog can land in the text box above the button pressed, if there is another frog there a message box will pop up saying sorry space is filled other wise the frog should land there.

[code]...

The error message says "Conversion from string "frog1" to type 'Double' is not valid." I understand what a double is but I've tried And If and that causes a bunch of errors.My Question is whats wrong with this cod and how can I make a double if statement???PS I did try to make an array to shorten this but thats in a different fourm will post URL later

View 3 Replies

Format Listview : Head Of Listview Textalign = Center And Item Of Listview Textalign = Right?

Mar 12, 2009

i want to format listview head of listview textalign = center and item of listview textalign = right

View 1 Replies

VS 2010 Listview Add And Select - Populate A Listview And Leave Selected Records That Are True

Apr 19, 2012

I want to populate a listview and leave selected records that are true

I have a DB record which is ID int, desc varchar, selected boolean.

I have tried the code below

LVProducts is a Listview and DS is a dataset

CODE:

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved