Drawing Graphics - How To Clear Image In PictureBox
Nov 23, 2011
I have 1 image in picturebox. Now I draw some rectangles. I'm trying clear the image (only rectangles and left the image) without success.
Private Sub btnImageSelection_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnImageSelection.Click
Dim intImages As Integer = 0
Dim intImagesLine As Integer = 0
Dim intImagesColune As Integer = 0
picImage.Image = PictureBox1.Image
[Code] .....
The cycles for is for show the rectangules and works fine. but
i.Clear(Color.Blue)
The image is clear but the rectangles are showed and then unshowed.
View 19 Replies
ADVERTISEMENT
Dec 31, 2010
Here are 3 subs I use to clear graphics on a Form, Picturebox, & PaintEventsArgs. I'm overriding DrwClear for each of the objects.
[Code]...
View 7 Replies
May 26, 2012
Problem1: I have a picturebox on a form. I have also managed to draw several PNG files with transparency onto the picturebox (see below). However, If I move the form outside the border and move it back, the image is gone. My source so far:
Dim k1 As New Bitmap(My.Resources.image1)
Dim k2 As New Bitmap(My.Resources.image2)
Dim drawMe As Graphics = PictureBox1.CreateGraphics
Dim bgcolor As Color = Color.FromArgb(128, 128, 128)
drawMe.Clear(bgcolor)
[Code]...
View 10 Replies
May 23, 2009
Is it possible to convert an object form System.Drawing.Graphics to System.Drawing.Image?
View 4 Replies
Jul 17, 2009
If I try to draw a circle by using e.g.
Code:
e.Graphics.DrawEllipse(Pens.Red, 50.133, 100.321, 0.1, 0.1)
I will get an error message. I tried something like
Code:
Public ObjectPoint As PointF
Dim cpoint As New PointF()
cpoint.ObjectPoint = New PointF(startX, startY)
e.Graphics.DrawEllipse(Pens.Blue, cpoint.ObjectPoint, 0.4, 0.4)
but it didn't work for the location and the circle size. How to draw a circle(and rectangle) by using floating point numbers?
View 6 Replies
Jan 20, 2010
I have a System.Drawing.Graphics g, which draw something in a PictureBox. Now I want to export this pGraphics to a new System.DrawingImage pImage (or Bitmap). But how?
Dim pImage As Bitmap
Dim g As Graphics
g = Graphics.FromImage(b)
[Code].....
View 9 Replies
Mar 10, 2010
I have two graphics I'm trying to superimpose into one, then display in a DataGridViewImage cell...The Value property of a DataGridViewImage is an Image type.
Dim Image1 As System.Drawing.Image = imgl_Imagelist1.Images(0)
Dim Image2 As New Bitmap(imgl_ImageList2.Images(0))
Dim DualGraphic As Graphics = Graphics.FromImage(Image1)
[code].....
View 3 Replies
Sep 11, 2009
How can I clear the image in a picturebox to draw a new image.
View 3 Replies
Jul 20, 2011
I have 4 control 3 button and 1 picturebox
vb.net
Private sub Button1 Dim bm As Bitmap = New Bitmap("D:Trening4 - Copy.bmp"
[code].....
View 4 Replies
Jul 10, 2010
I am using a third-party .NET video capture function library that displays atreaming video from a USB video capture device in a VideoPictureBox (which is very much like the usual .NET PictureBox). I want to display graphics and text over the video stream.
[Code]...
View 2 Replies
Jan 9, 2011
I am new to vb.net, from VB6. Trying to understand drawing a simple line graph into a picturebox, which was so simple in VB6 ! From code snippets, I can see the basic idea using an bitimage to draw the lines and then showing it in a picturebox. I don't understand how to (simulate) scaling of the bitmap's x/y scales like you could do with VB6's .Scale.
View 1 Replies
Jul 19, 2010
I have a VB.NET Windows Forms app with a logo image on the form as a System.Drawing.Bitmap inside a PictureBox.I used the Visual Studio Designer to add the logo .bmp image so I don't currently have any VB code doing anything with it.I'd like to make the current logo a clickable object/button so when I click on it a file browser dialog opens and I can select a new image to replace the current image.The current image is a local resource and is set in a PictureBox as a System.Drawing.Bitmap.How would I replace that System.Drawing.Bitmap with a file selected from the file browser dialog?
View 1 Replies
Jan 10, 2011
I created an app which loads specified image to the picturebox and allows to draw on it:
PictureBox.ImageLocation = "dummy.jpg"
Dim g As System.Drawing.Graphics
Dim pen1 As New System.Drawing.Pen(System.Drawing.Color.Green, 4)
[code].....
View 2 Replies
Nov 12, 2008
How do I rotate a bitmap image that has been placed in a picturebox? I need to make it appear upside down or rotated according to user input. I can't find anything in the properties to do this
View 2 Replies
Feb 27, 2009
Ive been working on creating a side scroller game, and the back color of my pictureboxes needs to go. when transparent, it shows through the program and onto whatever is active in your Windows os(usually Visual studios).
I am trying to rip pixel color off of the background image picturebox( the level), and replace parts of the character picture box that show transparency with the level art. there may be poor logic in my code?
Heres my code:
Dim newImage As Bitmap = New Bitmap(PictureBox1.Image)
Dim backImage As Bitmap = New Bitmap(PictureBox2.Image)
Dim ximg As Bitmap = New Bitmap(PictureBox3.Image)
[code]....
not the best idea, but all i get is one color for all the level pixels placed in the new image, which is odd. any poor logic you see in this code that could allow the newImage.setPixel not to be 1 color? when i breakpoint, it is recieving different colors from the backimage.getpixel, but only putting one shade on for setpixel somehow. im not going for an accurate color read from the background yet, just wondering why im getting 1 pixel color for the whole picturebox background when being changed.
View 1 Replies
Aug 14, 2009
drawing text on a window which is not the current form's window.I remember doing this in Win32 api with getwindowdc(handle) to obtain a DC for the Window, then textout() on the DC.
View 2 Replies
Apr 17, 2010
I have tried to realign the image by down and right one pixel, but still only part of the first row and column are visible when zoomed.I can't find exactly what I'm looking for online.
My computer is an HP-Pavillion dv9600 Notebook PC.
OS: Windows Vista SP2 32-bit
The following code reproduces the problem:
Public Class PictureBug
Dim pxlColor As Color
Dim img As Bitmap = New System.Drawing.Bitmap(My.Resources.TestBug[code]......
View 7 Replies
Feb 18, 2012
I need some code to draw a resizable, draggable rectangular cursor (or selection box) on a picturebox. I found some excellent code (albeit rather old) that does just that, but on a form rather than a picturebox. I have tried converting the code - basically moving things to the picturebox events (Paint, MouseDown, MouseMove etc). It nearly works but leaves a trail behind it when you move or resize the cursor. In other words, the selection rectangle is not being erased before being drawn in the new position.
Is there some fundamental difference between drawing graphics on a form and drawing on a picturebox that would cause this behaviour? Something like, when you invalidate a form and cause a redraw it erases what you did last? If not, then I just need to dig a bit further and work out how the cursor is being erased from the previous position.
Here's the original code that works fine on a form:
Private DragRect As New RectangleF(20, 20, 100, 80)
Private Adornments(7) As RectangleF
Private MouseInRect As Boolean = False
[Code]....
View 1 Replies
Jul 31, 2010
I am trying to draw on the Desktop i have use GetDc (api function )to get the handle of desktop
Private Declare Function GetDC Lib "user32" (ByVal hwnd As Integer) As Integer
after that i have use this code to draw some test
Dim g As Graphics
[Code]....
the code is work 100%100 but the problem is that i want delete what i have draw , I meen that I want to clean the desktop is there any api function can do that ?
View 10 Replies
Apr 27, 2010
I use graphics.fillrectangle to draw rectangle in datagrid
and i want remove all rectangle , it's possible ?
View 12 Replies
Aug 17, 2009
With this line...
If PictureBox1.Image = My.Resources._2star Then
I get this error: Operator '=' is not defined for types 'System.Drawing.Image' and 'System.Drawing.Bitmap'.Is there another way to say = with images?
View 8 Replies
Feb 23, 2012
I am trying to create a simply bouncy ball application in VB net; I am using a timer and the FillEllipse() method to try ad create a new circle at every tick of the timer.
Code:
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
Dim Gr As Graphics = Me.CreateGraphics
Gr.FillEllipse(Brushes.Teal, X, Y, W, H)
CollisionDetect()
X = X + X_Dir
Y = Y + Y_Dir
Gr.Dispose()
End Sub
The result? The form continously draws onto itself, without clearing the last circle. This means that you end up with a 'line' of spheres together.
To clarify:
X is well, the X-Coords
Y is Y- Y-Coords
X_Dir is an integer, it is added to every iteration of the loop so the next time the loop iterates, it'll be at a different location;
Y_Dir is the same but for the Y Coords;
CollisionDetect() Is empty. It is yet to be filled, it will handle the collision with the sides of the forms. W, H are width and height, respectively.
View 1 Replies
Jan 21, 2010
Here is my favicon code
Dim oURL As Uri = New Uri(e.Uri.AbsoluteUri)
Dim favicon As Image
If oURL.HostNameType = UriHostNameType.Dns Then
[code]....
The error is Value of type System.Drawing.Image cannot be converted to System.Drawing.Icon Is it even possible to make the favicon be the icon of the form?
View 4 Replies
Feb 20, 2009
I have been trying to draw spirals in vb.net. Here's a link to the formula [URL]. here's what I was trying to do. The code below is just drawing points which I was later going to edit to connect from point to point as soon as i got the spiral function working.
Function Draw()
Dim iImageCenterPointH As Integer = pbOut.Height / 2
Dim iImageCenterPointW As Integer = pbOut.Width / 2
Dim iCircleSpace As Integer = 10
[Code] .....
I am not 100% the output is matching the formula here's what I am getting atm ...
View 7 Replies
Oct 21, 2010
I know this is probably not going to be simple, I tried searching around, but couldn't find anything. I am using some code to 'draw' text in a custom format to a panel with a custom bitmapped region (custom shape).Here is the code that writes the text inside a specified area:
g = LeftControlPanelV2.Panel1.CreateGraphics
Using fnt As New Font(New FontFamily("Arial"), 9, FontStyle.Regular, GraphicsUnit.Point)
Dim sf As StringFormat = StringFormat.GenericDefault
sf.Trimming = StringTrimming.EllipsisWord
[code]....
Obviously the text is not really located on the panel, but looks like it as it's drawn on top of the panel. So, when the panel or form that the panel is attached to moves, I lose the text. I though I could just call back to writing the text when the panel/form arrives at the correct place, while clunky, it works to a degree. I was hoping there was a better way of doing this, so that the text doesn't disappear when moving controls and I don't have to make repeated calls to the same drawing text over and over and over...
Edit: Should probably add that there will be 5 different panels each with their own custom drawn text, and all 5 need to move at the same time...
View 2 Replies
Aug 3, 2010
I have been researching for a while, and now am converting my project from using forms to do transparencies to just drawing the images. At first, I thought picturebox's could be used, but can't figure out how to do transparencies on those, so I settled for drawing images. Here is what I am using: [Code] Now, I know these are not controls, but is there any possible way to make these drawn images have a click-able event fire?
View 4 Replies
Jul 15, 2010
Rather than create a Form and use Graphics generated via the CreateGraphics Method, how does a System.Drawing.Graphics Object get built?
View 16 Replies
Sep 13, 2009
I have been looking through the code bank and i cant find anything that is helping me with my problem what i have is a print button that when clicked it goes to my print preview page, then i can print the file. i have got all the other controls on my page to display correctly using this example
e.Graphics.DrawString(sType, New Font("Arial", 10, FontStyle.Underline), Brushes.Black, 110, 650)
but how can i get my ListView header and content to preview on the page as well. my listView has 5 columns and i am using the PrintDocument control.
View 10 Replies
Apr 9, 2011
I have been having problems getting a vb.net app to have the same responsiveness to drawing and manipulating graphics as I had with vb6 and the API. In my journeys here at this forum and elsewhere, I understand that GDI+ is pretty much a gonner, and that other avenues should be explored. For instance, I have been doing my initial research into WPF and it seems that maybe it would be a more natural shift from GDI+ than moving to DirectX or OpenGL.
View 8 Replies
Oct 26, 2010
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim cr As New Bitmap(4, 4)
[code]......
View 3 Replies
