When I close the form I get the message "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."at line obj_oledb_da.Update(dataSet).
[Code]...
Getting the following error when running my application.Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.On form load it reads the database to the textboxes for the user, they can then change their details.On clicking the save button I am attempting to update the database with the information from a textbox but the above error is thrown and I'm not a bit lost.[code]
View 3 RepliesError Which I get is:
"Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."
The Code is as follows:
Dim Countr As Integer
For Countr = 1 To GrdData.RowCount
strTrnsUpdt = "select * from order_transaction where uniq_id='primary key of the field to be updated'"
[Code].....
I am using a Microsoft Access Database and I cannot get the Update to work. I assigned a Primary Key in the Access table, but I still receive the error: "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information"
Here is the
Try
strSQL = "SELECT * FROM Item ORDER By Item.Job"
With oCmd
[Code].....
dynamic sql generation for the updatecommand is not supported against a selectcommand
View 9 Repliesi am using data grid and i want to update it when user change i but the fallowing command in button to save update but it did not work and it give error massage
Dim builder As OleDbCommandBuilder = New OleDbCommandBuilder(DataAdapter1)
Dim CmdB As New OleDb.OleDbCommandBuilder(DataAdapter1)
DataAdapter1.Update(DataSet1, "Section")
the error messge (Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.)
I have a table Personal.. and bind it in dataset.. i want to update the fname using datatable.. but it is not working ..throwing the error "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."See my source code
[Code]...
I have this code that I have found on the net and I run but there is error that says "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.". May I know what is the problem?
Here is the code that I get from the net:
CODE:
i have built a DB app using vs2010Beta2 + an Access DB .mdb file for my customers the save bnt work s ok, but when i close the app i get an error message come up saying :- Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that dose not return any key column information.i have no errors repoted in the error window at the bottom and all runs well untill frm_closing,below is the code in my form closing event. below that is the code for the btnSave event
Private Sub frmMainCustomerDetails_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
If MyState = "Edit" Or MyState = "Add" Then
[code]....
im new to vb.net 2003 but have used vb 6 for years and dabbled with 2005. A program that would usually take me a few hours to make i am on day 5, 4 and a half of which have been trying different ways to get it to update, and not one of them will post the information back to the SQL 2000 database I am actually going insaine.
The best i can get out of it is this error. "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information" I have googled it and come up with the fact the primary key isnt set right, but i still cant get that to work. Here is the peices of code that are relevant.
[Code]....
When this code segment execute
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Validate()
Me.myDA.Update(Me.myDataSet.Tables("Table1"))
Me.myDataSet.AcceptChanges()
End Sub
It giving the following error. Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information. Can there is another way to update the access database by using datagrid view.
Dynamic SQL generation for the DeleteCommand is not supported against a SelectCommand that does not return any key column information. above error has occure during updating and deleting the record
Dim constr As String
Dim con As OleDb.OleDbConnection
Dim da As OleDb.OleDbDataAdapter
Dim ds As New DataSet
[code]....
i set the primary key also records are present in database?
I have a container with different controls in it. This container can be shown 1 or more timeson a form. The number of times is not known when the application is build.So form with the number of containers must be generated by code. When the number of containers is high a scroll bar must be shown.My idea was to use the control TableLayoutPanel. The first row consists of the container with it's controls. When loading the form a number is calculated. This number is used to show the number of containers.
View 6 RepliesI have Joined two tables into a datagridview and i want users to be able to update the table values but i have this error,which is the title of this thread.Is there any alternatives of updating a joined table in datagrid view? here are my codes
Private Sub Search_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
con.Close()
Dim cmd1 As OleDbCommand = New OleDbCommand("SELECT LECT_NAME,LECT_ADDRESS,LECT_CONTACT,SUB_SEMESTER,SUB_ID,SUB_NAME FROM
[code]....
I have 2 datagrids. One to show Product information and another for Product purchase details entry.Both share the same dataset. The dataset (ds) is filled up with columns from 2 table
ProductMstrTbl : ProductID, ProductName..
ProductDetailsTbl: ProductID, PurchaseDate, Amt, BalanceQty..
[code].....
My users are getting this error when trying to update the database:
"Concurrency violation: UpdateCommand affected 0 of the expected 1 records"
All the users are doing is clicking a button which updates a record.No two users are updating the same record or even within the same column. They could be updating within the same row but still not the same record.It seems to be happening when the program is open for a little while and they come back and try to update the database through the program. I have read a little bit about this error but none seem to lead to a clear solution.It seems like the database connection is timing out due to inactivity?Here is my update command:
vb.net
Private Sub btnComplete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnComplete.Click
Me.txtComplete.Text = Date.Today[code].....
Public Shared Function getJoinedTable() As DataTable
connect()
updatableAdapter(1) = New OleDb.OleDbDataAdapter("SELECT a.id, a.number, a.subjectName,
[code].....
I'm trying to update a Access database. I'm new to this and I've reviewed an Ado tutorial early today. I'm trying to apply what is taught but I'm getting an error message and I can't seem to get passed it.
In my code I have an Add, Update, and Delete process. The Add and Delete processes work just fine. It is only when I go to update the database that I get the following message."Concurrency violation: the UpdateCommand affected 0 of the expected 1 records."
[Code]...
Update requires valid UpdateCommand passed DataRow collection modified rows. When I run the following code. But the strange thing is that I have similar code on another form and it works great. The only difference is the database table is different. I verified both tables and they look identical, as far as settings. I have verified that _Non_MS_Office_Licenses has a primary key that is unique. Looking in dataset manager I see the query for fillBy() is fine and it has all the insert and update stuff. At the end when it verifies it says all is verified when I configure the dataset
Dim row = FrmApp.Non_MS_Office_LicensesBindingSource.Current
row("Primary User") = Replace(CStr(TxtUserid.Text), "'", "`")
row("Staff Last Name") = Replace(CStr(TxtLastName.Text), "'", "`")
row("Staff First Name") = Replace(CStr(TxtFirstName.Text), "'", "`")
[Code]...
I've got a simple mdb database set up in Visual Basic Express Edition (winforms) and I'm trying to update data from a datagridview to a database. I've databinded the textboxes to the columns I want in the datagridview and this works great. After some struggling, I've finally managed to have the values updated in every row of the database. But, trying to modify a newly created record throws this error:
"Concurrency violation: the UpdateCommand affected 0 of the expected 1 records"
I mean, it seems as though the error only happens with newly created rows. Because closing the application and reopening it immediatly, I'm allowed to update the values of the cells.
I also noticed that the ID of the row is set to "-1" when I've just created a new row. The other rows don't have a negative number for ID. Could this be the cause? Seems as though the row isn't really updated to the database.
So this is the code for the AddRow button
Dim newRow As MusicDBDataSet.SongsRow
newRow = MusicDBDataSet.Songs.NewSongsRow()
newRow.Name = txtBoxNewName.Text
newRow.Genre = txtBoxNewGenre.Text
newRow.Rhytm = txtBoxNewRhytm.Text
[Code] .....
But thinking about it, the textboxes used to update the values of the newly created row are databinded to the database or tableadapter itself right? Could it be that the UpdateCommand fails because the row hasn't really been created properly yet?
I have created an application which ticks and unticks a routing sequence. But whenever I click on my save button after tickin the required, I get an exception thrown at me stating "Concurrency violation: the UpdateCommand affected 0 of the expected 1 records". My code is as follows:Private Sub OKButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OKButton.Click
'Displaying the rows in the dataGridView.Me.myadapter.SelectCommand.CommandText = "SELECT dbo.WR010130.RTSEQNUM_I, " _& "RTSEQDES_I, SCHEDULESTARTDATE_I, DONECB_I, " _& "CLOSEDBY_I, DATECLOSED_I, TIMECLOSED_I, SCHEDULESTARTDATE_I, WCID_I " _& "FROM dbo.WR010130 JOIN WO010032 ON dbo.WR010130.MANUFACTUREORDER_I = dbo.WO010032.MANUFACTUREORDER_I " _& "WHERE dbo.WR010130.MANUFACTUREORDER_I = '" & MoNoComboBox.Text & "' AND (dbo.WO010032.MANUFACTUREORDERST_I = 3 OR dbo.WO010032.MANUFACTUREORDERST_I = 7)"
[Code]...
im using a sqldataadapter, dataset and bindingsource to connect to a table. i retrieve all records from the database and i change the data on a field then update changes to database. when i try to change back to original value i get a Concurrency violation error (concurrency violation: The updatecommand affected 0 of the expected 1). this is the
Try
Me.Validate()
Me.sqlBindingSource.EndEdit()
Dim slqCmdBuilder As New SqlCommandBuilder(sqlAdapter)
[Code].....
I'm having trouble updating a sql server database with a dataset using a dataadapter. I have used the dataadapter with success in the past when adding new rows, using a single table, and just calling the dataadapter.update command.However, I am now running into a more complex scenario and I need to use dataadapter.UpdateCommand method and I'm having lots of problems.
The sql statement that I'm using to fill the dataset looks like this: "Select [Order Details].ProductID, [Order Details].UnitPrice, [Order Details].Quantity, [Order Details].Discount, Products.ProductName From [Order Details] INNER JOIN Products ON [Order Details].ProductID = Products.ProductID Where OrderID='" & strOrderID & "'", sqlConn"
This is pulling the data from 2 different tables (Order Details and Products) and then joining them and filling the dataset, and I am seeing the exact results I want. I am then binding the dataset to a datagrid control that allows the user the option to edit the datagrid, which in turn updates the dataset.
So that being said how do I get the updated dataset back into the database? I tried using dataadapter.update but it informed me that I now need to use dataadapter.UpdateCommand. Ok, so I've looked up how to use UpdateCommand but I cannot for the life of me figure out how to set up the right sql command statement. Part of what has me confused is the UpdateCommand examples I have seen are working with a specific row and updating that rows data. I can get that to work but I want all changes to the dataset to persist and update to the database when the user is done working on the datagrid.
Also, the examples shown set up command parameters but again, this is only confusing me because I just want to send the whole dataset back to the database. It seems like the parameters are saying "Ok, this specific row in this specific dataset.table, update these specific fields in this specific database". I'm not sure how to accomplish that when working with a datagrid.
I am trying to check for concurrency when updating a record in the database. Here is my current VB.NET code and Stored Procedure code to do the update.
When a user changes a Status column value the DataGridView CellValidating event is fired and in that event it try's to update the record in the database using the stored procedure. The update works, but my SqlDataAdapter doesn't update dtmUpdateDatetime in dtResults. My UpdateDatabase function uses dtmUpdateDatetime to check for concurrency.
Public Class frmCalculatedResults
Private dtCriteria As New DataTable
Private bs As New BindingSource
[Code]....
What's the syntax for an Update query for a table without a primary key?Disclaimer: Frustratingly, adding a primary key is not an option. My program is a small program in a much larger system with poor data management. My development time does not include rewriting the other software.
Note: The database is Microsoft Access.
Note: Similar to: Excel: TableAdapter UpdateCommand for table without primary key
UPDATE: Am I correct in saying, "If the table in the database has no explicit primary key, then there can be no valid TableAdapter UpdateCommand?"
None of the "answers" that I have been able to find, address the problem. I am using oledb to read and update a MS Access DB in an ASP.NET application.I read the member dataset and fill it using the data adapter.I modify the row of data in the dataset.I then use the data adapter to update the row and get the error shown in the subject.
I am an experienced developer using ado.net on sql server windows application via the data adapter, so am familiar with how this should work.
I have searched everywhere and am hoping that someone here at Microsoft might have the answer.
I keep getting the above error when trying to update a record from a SQL Server DB TableWhat exactly does this Error Message mean?
View 3 RepliesI have a table in Access with two key fields (let's call them Item and Cust). These key fields *combined* are the primary key. So each record must have a unique Item and User combination. It can have a duplicate Item with other records, and a duplicate Cust with other records, but not a duplicate of both. Because my "primary key" is a combination of two fields, I can't make a primary key on the table in Access (it only supports one field as a primary key).
I have another table in SQLServer which also has Item and Cust, but in addition, is has several descriptive fields that give more details about the Item and Cust. I'm trying to use ADO.NET to bring in that SQL Server table and UPDATE some matching fields in Access with the descriptive fields. [Code]
i have created a dynamic tabpage and a dynamic tablelayoutpanel inside it then added dynamic textboxes and labels inside the tablelayoutpanel...the thing is , i am having a problem on how to access the value of those textboxes and labels and add them as new columns in the new table(tagpage) in mysql database, i can already create the table in the database but i cant add the new columns in it. heres the code for accessing the values of the labels and textboxes
error: NullReferenceException was unhandled....Object variable or With block variable not set.
sql = "alter table " & tbl_selected(counter) & " add " & frmMain.Controls("TLP_" & SecArrList_sp(counter2)).controls.item(SecArrList_sp(counter2) & "label" & counter).Text & " varchar(100) NULL;"
I would like to bind a DataGridView to a different LINQ query every time (in order to reuse the same form/DGV for different queries), like this:
[Code]....
but the "Qry", and the number of comboboxes, and their field names would change every time.