I have this code that I have found on the net and I run but there is error that says "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.". May I know what is the problem?
Here is the code that I get from the net:
CODE:
im new to vb.net 2003 but have used vb 6 for years and dabbled with 2005. A program that would usually take me a few hours to make i am on day 5, 4 and a half of which have been trying different ways to get it to update, and not one of them will post the information back to the SQL 2000 database I am actually going insaine.
The best i can get out of it is this error. "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information" I have googled it and come up with the fact the primary key isnt set right, but i still cant get that to work. Here is the peices of code that are relevant.
[Code]....
When this code segment execute
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Validate()
Me.myDA.Update(Me.myDataSet.Tables("Table1"))
Me.myDataSet.AcceptChanges()
End Sub
It giving the following error. Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information. Can there is another way to update the access database by using datagrid view.
I am using a Microsoft Access Database and I cannot get the Update to work. I assigned a Primary Key in the Access table, but I still receive the error: "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information"
Here is the
Try
strSQL = "SELECT * FROM Item ORDER By Item.Job"
With oCmd
[Code].....
dynamic sql generation for the updatecommand is not supported against a selectcommand
View 9 Repliesi am using data grid and i want to update it when user change i but the fallowing command in button to save update but it did not work and it give error massage
Dim builder As OleDbCommandBuilder = New OleDbCommandBuilder(DataAdapter1)
Dim CmdB As New OleDb.OleDbCommandBuilder(DataAdapter1)
DataAdapter1.Update(DataSet1, "Section")
the error messge (Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.)
I have a table Personal.. and bind it in dataset.. i want to update the fname using datatable.. but it is not working ..throwing the error "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."See my source code
[Code]...
i have built a DB app using vs2010Beta2 + an Access DB .mdb file for my customers the save bnt work s ok, but when i close the app i get an error message come up saying :- Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that dose not return any key column information.i have no errors repoted in the error window at the bottom and all runs well untill frm_closing,below is the code in my form closing event. below that is the code for the btnSave event
Private Sub frmMainCustomerDetails_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
If MyState = "Edit" Or MyState = "Add" Then
[code]....
Getting the following error when running my application.Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.On form load it reads the database to the textboxes for the user, they can then change their details.On clicking the save button I am attempting to update the database with the information from a textbox but the above error is thrown and I'm not a bit lost.[code]
View 3 RepliesError Which I get is:
"Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."
The Code is as follows:
Dim Countr As Integer
For Countr = 1 To GrdData.RowCount
strTrnsUpdt = "select * from order_transaction where uniq_id='primary key of the field to be updated'"
[Code].....
When I close the form I get the message "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."at line obj_oledb_da.Update(dataSet).
[Code]...
Dynamic SQL generation for the DeleteCommand is not supported against a SelectCommand that does not return any key column information. above error has occure during updating and deleting the record
Dim constr As String
Dim con As OleDb.OleDbConnection
Dim da As OleDb.OleDbDataAdapter
Dim ds As New DataSet
[code]....
i set the primary key also records are present in database?
I have Joined two tables into a datagridview and i want users to be able to update the table values but i have this error,which is the title of this thread.Is there any alternatives of updating a joined table in datagrid view? here are my codes
Private Sub Search_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
con.Close()
Dim cmd1 As OleDbCommand = New OleDbCommand("SELECT LECT_NAME,LECT_ADDRESS,LECT_CONTACT,SUB_SEMESTER,SUB_ID,SUB_NAME FROM
[code]....
I have a container with different controls in it. This container can be shown 1 or more timeson a form. The number of times is not known when the application is build.So form with the number of containers must be generated by code. When the number of containers is high a scroll bar must be shown.My idea was to use the control TableLayoutPanel. The first row consists of the container with it's controls. When loading the form a number is calculated. This number is used to show the number of containers.
View 6 RepliesError Message: "This server version is not supported. Only servers up to Microsoft SQL 2005 are supported VB.NET" I am using VB.NET 2008 and attempting to connect to SQL Server 2008 with XP as the operating system. I have service pack 1 installed in Visual Studio but this error message presists. The articles I have read on this error said to install sp1 as a solution but I have done that and the error persists. FYI, the error does not occur when I am using code to connect to SQL Server but when I attempt to connect using one of the designer wizards this error occure.
View 3 RepliesI am getting this error by simply trying to insert some VB.NET code in ASP.NET markup. See the code:
<%@ Control Inherits="PerformanceWeb.Framework.SiteSettings" CodeBehind="sitesettings.ascx.vb" language="vb" AutoEventWireup="false" %>
<table id="TABLE1" cellSpacing="0" cellPadding="2" border="0" runat="server">
[code]....
i need to update my data using stored procedure here is my code :Try
con = getconnect()
con.Open()
sqlcmd = con.CreateCommand
[code]......
As part of the application I'm writing in Visual Basic, I have written code to display records in text boxes and cycle through each of them one record at a time. I'm having trouble getting the code I've written to update records to work however.
VB
Public Class frmRecords
' VARIABLES TO AID NAVIGATION THROUGH RECORDS
Dim moverow As Integer
[code]....
At the present time I get an error that says "The DataAdapter.SelectCommand property needs to be initialized"
I am using C# to develop an enterprise level application. I use VS2010 Modeling Project to model my classes but there is no code generation utility which available for free. I want to know if is there any Utility/Extension that can generate C#/VB code from UML diagrams.
View 2 RepliesIn a ASP.NET app from a procedure IN a VB code file a dynamic control is called. The first problem may solve the second. In the following line of code I am getting an "end of statement expected" error at the following line.
[Code]....
Im just getting user to passing in varibles to SQL i have the below connection string and its throwing an error saying "The SelectCommand Property has not been initialized before calling 'Fill'
[Code]...
are there any classes in the .net framework that allow me to generate classes that i can save as .cs or .vb files ?
View 2 RepliesI am new to WSSF and am wondering if it would work for solution with VB as the programming language if so how to achieve it. I have seen samples which generates C# code but my project requirement is VB .Net.
View 1 RepliesI am wishing to emulate the auto code generation that happens when you derive from a class, such as Form, and declare the Public Sub New() constructor. When this happens the constructor will auto-generate code like the following:
Public Class MyInheritedForm
Inherits Form
Public Sub New()
[Code].....
The property on the error message is a List(Of Person) and for some reason it trigger this error, for almost anything I do, and its getting really annoying.
View 2 RepliesTrying to get some VB practice after a long time rest, but I'm having some issues even getting a new solution open. Ok, I have VB '08 Express on Vista (Visual Studio also installed) and whenever I try to create a new solution I get the following error:[code]Now I've checked the forums and seen that this error has come up a fair bit, but I've tried the couple of suggestions I have seen to no avail.
View 7 RepliesJust started a new project and was kind of bummed out that instead of creating interface Im forced to spend quite large amount of time creating objects, INSERTs,UPDATEs.. that kind of thing. Mainly because it's booring. Anyway, I was wondering if there are tools in VS2010 for visual basic that would allow someone to generate clases and INSERT, UPDATE, DELETE stored procedures based on database structure OR creat INSERT, UPDATE, DELETE procedures and database structure based on class structure.
View 2 RepliesIs there a way in vb.net to produce a excel file from a certain series of code that could be use for report generation.
View 1 RepliesI'm trying to write text to a file using the following code, but I got the message :
"URI formats are not supported."
Private
Sub
cmdSave_Click(ByVal
sender As
System.Object,
[Code] .....
A client used to work on a desktop application which i have developed a while ago. Recently, his computer got 're-imaged' by the IT department. After that, the application starts crashing at line [Code] giving an error message "No such interface supported". i am using vb.net 2003 and access database. also there is a password on the database file.
View 5 Replies