I am getting this error by simply trying to insert some VB.NET code in ASP.NET markup. See the code:
<%@ Control Inherits="PerformanceWeb.Framework.SiteSettings" CodeBehind="sitesettings.ascx.vb" language="vb" AutoEventWireup="false" %>
<table id="TABLE1" cellSpacing="0" cellPadding="2" border="0" runat="server">
[code]....
I have a multiline (> 50 lines) textbox containing plain text. I want to add either a session variable to the text in this box. In asp I would have done it by putting in <% %> code blocks but in .net I am getting the following error: "Code blocks are not supported in this context". I assume therefore that this would need doing in code behind.Is there a quicker way than putting all the text from the textbox in a string in code-behind and then adding the variable on like this? I would like to keep the text in my aspx page if possible.
View 2 RepliesI have this code that I have found on the net and I run but there is error that says "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.". May I know what is the problem?
Here is the code that I get from the net:
CODE:
Error Message: "This server version is not supported. Only servers up to Microsoft SQL 2005 are supported VB.NET" I am using VB.NET 2008 and attempting to connect to SQL Server 2008 with XP as the operating system. I have service pack 1 installed in Visual Studio but this error message presists. The articles I have read on this error said to install sp1 as a solution but I have done that and the error persists. FYI, the error does not occur when I am using code to connect to SQL Server but when I attempt to connect using one of the designer wizards this error occure.
View 3 RepliesWhen bulk renaming files (14000 of them) i get this error: The CLR has been unable to transition from COM context 0x4cefd8 to COM context 0x4cf148 for 60 seconds. The thread that owns the destination context/apartment is most likely either doing a non pumping wait or processing a very long running operation without pumping Windows messages. This situation generally has a negative performance impact and may even lead to the application becoming non responsive or memory usage accumulating continually over time. To avoid this problem, all single threaded apartment (STA) threads should use pumping wait primitives (such as CoWaitForMultipleHandles) and routinely pump messages during long running operations.
My code is as follows:
Private Sub frmTest_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim asd As List(Of String) = FileIO.FileSystem.GetFiles("D:Music").ToList
Dim rs As New ADODB.RecordSet("SELECT * FROM Songs", My.Settings.Files_Database__Connection)
[code].....
i am making a Reflector,I want Some help with generating Blocks of Code(Loops,Branching,using Blocks,Switch Case Blocks etc).Until now i am able to convert IL to expressions and identifying startoffset and endoffset of a Code Block for Generating Code Blocks..The Trouble i am facing is Identifying the Initializer, Incrementer and Condition in a For Next Loop. which are contained between the StartOffset and EndOffset as Expressions. [code]
View 1 RepliesI have a windows form that imports data from an xls file to sql2005. I have a browser button, a dropdown list for the sheet names in excel and a process button. Now the excel file has 3 sheets (sheet1, sheet2, sheet3) the columns and data type are not the same so I need 3 different queries to access this file,
I think about CASE, but not very sure,
So if dropdown list.selectedvalue=sheet1 then
run code
Is there a way to pass code blocks to a method or class?
I'm trying to write a number of exception handling methods.[cod]e...
I have a form with a "Send" button to test a code to send SMTP emails.It fires the click event when I hit the "Send" button, but the email is never sent if I leave the form running. When I close it, the email is sent.This is not the needed behavior because the User may never close the Application (this is a Client/Server application, not Web).Below is the code behind the "Send" button's click event[code]...
View 1 RepliesI got this message because of a long process: ContextSwitchDeadlock was detected
Message: The CLR has been unable to transition from COM context 0x3dc190 to COM context 0x3dc300 for 60 seconds. The thread that owns the destination context/apartment is most likely either doing a non pumping wait or processing a very long running operation without pumping Windows messages. This situation generally has a negative performance impact and may even lead to the application becoming non responsive or memory usage accumulating continually over time.
To avoid this problem, all single threaded apartment (STA) threads should use pumping wait primitives (such as CoWaitForMultipleHandles) and routinely pump messages during long running operations. I've poked around on the internet and on a forum, someone suggested to use application.doevents(). I did that and the messaged goes away. In an earlier thread a member wrote that using application.doevents rarely was used appropriately. Is my situation a proper usage of application.doevents or is there something else I should be doing?
I'm trying to write text to a file using the following code, but I got the message :
"URI formats are not supported."
Private
Sub
cmdSave_Click(ByVal
sender As
System.Object,
[Code] .....
A client used to work on a desktop application which i have developed a while ago. Recently, his computer got 're-imaged' by the IT department. After that, the application starts crashing at line [Code] giving an error message "No such interface supported". i am using vb.net 2003 and access database. also there is a password on the database file.
View 5 RepliesOn a client's computer I get error 80004002 - No such interface supported.
I am using Vb.Net 2010 to open an Access 2007 database. On my computer the connection works perfectly so it cannot be my coding or it would not work at all. On the client's computer I unstalled a version of my program that was working and installed the latest version of and the error started.
My app fails at this line of code:
Dim objConnection As New SqlConnection(Application("ConnString"))
My connection string is: [Code]. I googled this problem and the solution for it was having a malformed connection string where the "provider" was being specified when it shouldn't have. Example conn string: [Code]. I'm not specifying the Provider so I think I have a different problem.
Like to know will VB going to be provided support for Globalised Applications development for Windows Phone 7.1 or later?
View 6 RepliesCode:
Option Explicit
Private Const No_ERROR = 0
Private Declare Function inet_addr Lib "wsock32.dll" (ByVal s As String) As Long
[code]...
ByVal dst As Any, ByVal src As Any-->Error: Any is not supported in declare statements i am currently using visual studio 2005.
I try to use a special font in my programm xxxxxx.ttf (true type font)and i got this error "only tryetype fonts are supported .this is not a true type font "i used it before with same programm but since i installed a very old version of xp i got the error.
View 2 RepliesSo I have some users that are getting error: This Protocol Version is Not Supported on the following line of code in Red:
Private mobjThread As Thread
Private Sub StartServer()
Try[code].....
I am not able to recreate it on my machine or the 4 other local machines I have tested it on here.
I've a vb.net class library and my c# application is accessing that method. My C# code gives me compile time error that 'Start' is not supported by language, where Start is my method name.
[Code]...
I've downloaded the MSDN "101 VB Samples" from the MS site and I'm getting an error that reads "The project type is not supported by this installation". I can open the other files that I've tried (about a dozen in other folders), so I'm wondering if it is something specific with the VSTO files, or something about my VB setup.
I thought at first it was a problem with the path where the file is sitting, but even moving it from C:Documents and Settings[my name]My DocumentsMSDN to C: didn't work...Edit: I have also tried opening in notepad and converting the file to UTF-8, changing the File Association from MS Visual Studio version selector to devenv.exe, and running devenv /setup at the command prompt, all with no luck (all these ideas were found through Googling the error message....).
I'm fairly new to the MS Sync framework and have been beating my head against the wall for about four hours now to no avail. I'm simply trying to sync my databases (one "master" SQL Server 2008 with a SQL Server CE, the client) with:
Dim syncAgent As DataCacheSyncAgent = New DataCacheSyncAgent()
Dim syncStats As Microsoft.Synchronization.Data.SyncStatistics = syncAgent.Synchronize()
It works just fine in Visual Studio 2010 and always manages to sync, but now that I'm trying to implement it on my client's computers, I always get the error:
The specified change tracking operation is not supported. To carry out this operation on the table, disable the change tracking on the table, and enable the change tracking.
I have just created a new Extensibility Addin for Visual Basic using VS2005 Professional. This addin will be targeted at MS Outlook (I hope).When I look at the References tab of the project properties, I see the following message:-An error occurred trying to load the page.Unable to cast COM object of type 'System.__ComObject' to interface type 'EnvDTE.ProjectItemsEvents'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{22800963-2811-410D-BF87-A7808EAC977D}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).Why does this appear?How do I correct this?
View 6 RepliesI get an error : The ReadElementContentAsString method is not supported on node type None.trying to parse an xml string from the server, this is my code
Dim reader As XmlReader = XmlReader.Create(New StringReader(sTempUrl))
reader.ReadToFollowing("result")
Dim strResult As String = reader.ReadElementContentAsString()
[code]....
I have tried to find the sdk ('Windows Software Development Kit') mentioned in the 'GIF Encoder and Decoder Sample', but there are so many SDKs I can't find the one I need. I am using visual Studio 2005 Standard Edition on Windows XP. The language I program in is VB. Can someone point me to the right SDKs for the sample and OS and VS version?
View 3 Repliesim new to vb.net 2003 but have used vb 6 for years and dabbled with 2005. A program that would usually take me a few hours to make i am on day 5, 4 and a half of which have been trying different ways to get it to update, and not one of them will post the information back to the SQL 2000 database I am actually going insaine.
The best i can get out of it is this error. "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information" I have googled it and come up with the fact the primary key isnt set right, but i still cant get that to work. Here is the peices of code that are relevant.
[Code]....
When this code segment execute
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Validate()
Me.myDA.Update(Me.myDataSet.Tables("Table1"))
Me.myDataSet.AcceptChanges()
End Sub
It giving the following error. Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information. Can there is another way to update the access database by using datagrid view.
[code...]
In particular the MetadataProviderFactory Line... I can't quite seem to figure out how it should look in VB.
my code is in test.aspx.vb is,
Option
Strict Off
Option Explicit On
Imports Microsoft.VisualBasic
Imports System
[code].....
for the above code i am getting the following error when i'm viewing in browser.can any one help me.
Error List:
Handles clause requires a WithEvents Variable defined in the containing type or one of its base types.
Context is not a member of 'test'.
Context is not a member of 'test'.
Has anyone ever received an "INVALID CONTEXT ERROR" while running a threaded VB.NET 2.0 application? We seem to be getting this error very sporadically, but can't seem to determine the root cause.
View 1 Repliesi have a form with a webbrowser in it, now below is the code i use to generate my context menu, however it only works on the form NOT over the web browser, that has its own right click menu. is there a way to disable the browsers right click and have my own work over the whole form? [Code]
View 4 Replies