Error "Dynamic SQL Generation For The UpdateCommand Is Not Supported Against A SelectCommand That Does Not Return Any Key Colum
Oct 16, 2006
im new to vb.net 2003 but have used vb 6 for years and dabbled with 2005. A program that would usually take me a few hours to make i am on day 5, 4 and a half of which have been trying different ways to get it to update, and not one of them will post the information back to the SQL 2000 database I am actually going insaine.
The best i can get out of it is this error. "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information" I have googled it and come up with the fact the primary key isnt set right, but i still cant get that to work. Here is the peices of code that are relevant.
[Code]....
View 6 Replies
ADVERTISEMENT
Apr 18, 2009
When this code segment execute
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Validate()
Me.myDA.Update(Me.myDataSet.Tables("Table1"))
Me.myDataSet.AcceptChanges()
End Sub
It giving the following error. Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information. Can there is another way to update the access database by using datagrid view.
View 2 Replies
May 13, 2008
i am using data grid and i want to update it when user change i but the fallowing command in button to save update but it did not work and it give error massage
Dim builder As OleDbCommandBuilder = New OleDbCommandBuilder(DataAdapter1)
Dim CmdB As New OleDb.OleDbCommandBuilder(DataAdapter1)
DataAdapter1.Update(DataSet1, "Section")
the error messge (Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.)
View 2 Replies
Sep 4, 2009
I have a table Personal.. and bind it in dataset.. i want to update the fname using datatable.. but it is not working ..throwing the error "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."See my source code
[Code]...
View 2 Replies
Dec 31, 2009
i have built a DB app using vs2010Beta2 + an Access DB .mdb file for my customers the save bnt work s ok, but when i close the app i get an error message come up saying :- Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that dose not return any key column information.i have no errors repoted in the error window at the bottom and all runs well untill frm_closing,below is the code in my form closing event. below that is the code for the btnSave event
Private Sub frmMainCustomerDetails_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
If MyState = "Edit" Or MyState = "Add" Then
[code]....
View 4 Replies
Oct 8, 2009
I have this code that I have found on the net and I run but there is error that says "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.". May I know what is the problem?
Here is the code that I get from the net:
CODE:
View 2 Replies
Jul 24, 2005
I am using a Microsoft Access Database and I cannot get the Update to work. I assigned a Primary Key in the Access table, but I still receive the error: "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information"
Here is the
Try
strSQL = "SELECT * FROM Item ORDER By Item.Job"
With oCmd
[Code].....
View 4 Replies
Jul 4, 2011
dynamic sql generation for the updatecommand is not supported against a selectcommand
View 9 Replies
Mar 19, 2010
Getting the following error when running my application.Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.On form load it reads the database to the textboxes for the user, they can then change their details.On clicking the save button I am attempting to update the database with the information from a textbox but the above error is thrown and I'm not a bit lost.[code]
View 3 Replies
Oct 13, 2010
Error Which I get is:
"Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."
The Code is as follows:
Dim Countr As Integer
For Countr = 1 To GrdData.RowCount
strTrnsUpdt = "select * from order_transaction where uniq_id='primary key of the field to be updated'"
[Code].....
View 9 Replies
Feb 19, 2009
When I close the form I get the message "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."at line obj_oledb_da.Update(dataSet).
[Code]...
View 10 Replies
Dec 13, 2011
Dynamic SQL generation for the DeleteCommand is not supported against a SelectCommand that does not return any key column information. above error has occure during updating and deleting the record
Dim constr As String
Dim con As OleDb.OleDbConnection
Dim da As OleDb.OleDbDataAdapter
Dim ds As New DataSet
[code]....
i set the primary key also records are present in database?
View 1 Replies
Apr 23, 2010
I have Joined two tables into a datagridview and i want users to be able to update the table values but i have this error,which is the title of this thread.Is there any alternatives of updating a joined table in datagrid view? here are my codes
Private Sub Search_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
con.Close()
Dim cmd1 As OleDbCommand = New OleDbCommand("SELECT LECT_NAME,LECT_ADDRESS,LECT_CONTACT,SUB_SEMESTER,SUB_ID,SUB_NAME FROM
[code]....
View 2 Replies
Mar 19, 2009
I have a container with different controls in it. This container can be shown 1 or more timeson a form. The number of times is not known when the application is build.So form with the number of containers must be generated by code. When the number of containers is high a scroll bar must be shown.My idea was to use the control TableLayoutPanel. The first row consists of the container with it's controls. When loading the form a number is calculated. This number is used to show the number of containers.
View 6 Replies
Jun 14, 2009
in the keydown event of a textbox (textbox1) as text is typed in i want it to "knock off" items that dose not include the text in either colum 1 or colum 3.How can i do this ?
Private Sub TextBox1_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles richTextBox1.TextChanged
'code goes here
End Sub
View 25 Replies
Nov 6, 2009
Error Message: "This server version is not supported. Only servers up to Microsoft SQL 2005 are supported VB.NET" I am using VB.NET 2008 and attempting to connect to SQL Server 2008 with XP as the operating system. I have service pack 1 installed in Visual Studio but this error message presists. The articles I have read on this error said to install sp1 as a solution but I have done that and the error persists. FYI, the error does not occur when I am using code to connect to SQL Server but when I attempt to connect using one of the designer wizards this error occure.
View 3 Replies
Jun 6, 2011
i need to update my data using stored procedure here is my code :Try
con = getconnect()
con.Open()
sqlcmd = con.CreateCommand
[code]......
View 5 Replies
Jan 3, 2011
As part of the application I'm writing in Visual Basic, I have written code to display records in text boxes and cycle through each of them one record at a time. I'm having trouble getting the code I've written to update records to work however.
VB
Public Class frmRecords
' VARIABLES TO AID NAVIGATION THROUGH RECORDS
Dim moverow As Integer
[code]....
At the present time I get an error that says "The DataAdapter.SelectCommand property needs to be initialized"
View 9 Replies
Mar 15, 2011
Im just getting user to passing in varibles to SQL i have the below connection string and its throwing an error saying "The SelectCommand Property has not been initialized before calling 'Fill'
[Code]...
View 12 Replies
Mar 3, 2011
I'm trying to write text to a file using the following code, but I got the message :
"URI formats are not supported."
Private
Sub
cmdSave_Click(ByVal
sender As
System.Object,
[Code] .....
View 3 Replies
Apr 14, 2010
A client used to work on a desktop application which i have developed a while ago. Recently, his computer got 're-imaged' by the IT department. After that, the application starts crashing at line [Code] giving an error message "No such interface supported". i am using vb.net 2003 and access database. also there is a password on the database file.
View 5 Replies
Mar 14, 2011
On a client's computer I get error 80004002 - No such interface supported.
I am using Vb.Net 2010 to open an Access 2007 database. On my computer the connection works perfectly so it cannot be my coding or it would not work at all. On the client's computer I unstalled a version of my program that was working and installed the latest version of and the error started.
View 6 Replies
Sep 29, 2010
My app fails at this line of code:
Dim objConnection As New SqlConnection(Application("ConnString"))
My connection string is: [Code]. I googled this problem and the solution for it was having a malformed connection string where the "provider" was being specified when it shouldn't have. Example conn string: [Code]. I'm not specifying the Provider so I think I have a different problem.
View 3 Replies
Aug 5, 2009
Code:
Option Explicit
Private Const No_ERROR = 0
Private Declare Function inet_addr Lib "wsock32.dll" (ByVal s As String) As Long
[code]...
ByVal dst As Any, ByVal src As Any-->Error: Any is not supported in declare statements i am currently using visual studio 2005.
View 3 Replies
Apr 26, 2011
I try to use a special font in my programm xxxxxx.ttf (true type font)and i got this error "only tryetype fonts are supported .this is not a true type font "i used it before with same programm but since i installed a very old version of xp i got the error.
View 2 Replies
Jul 26, 2011
So I have some users that are getting error: This Protocol Version is Not Supported on the following line of code in Red:
Private mobjThread As Thread
Private Sub StartServer()
Try[code].....
I am not able to recreate it on my machine or the 4 other local machines I have tested it on here.
View 6 Replies
Jul 27, 2009
I am working on a program whereby insert, update and delete of database is required, i have been able to do so successfully but the above error occurs when i tried to insert a new row of data into the database and tried to edit it and update it to the database. The database platform i used is SQL server 2005 and i am using datagridview to display my data, my primary key is "s/n" which is an auto number, however, whenever after i insert data into the database, the newly added row has the "s/n" column blank shown in the datagridview and after i edited that row and tried to update it, the error occurs.
Imports System.Data
Imports System.Data.SqlClient
Imports System.Threading
Imports System.Text.RegularExpressions
[code]....
View 1 Replies
Jan 31, 2009
[Code]...
I have been looking at the ADO tutorial on this site and am trying to apply it to my own DB. When I run the code above I get this error Concurrency violation: the UpdateCommand affected 0 of the expected 1 records.
View 5 Replies
Jul 20, 2011
I've a vb.net class library and my c# application is accessing that method. My C# code gives me compile time error that 'Start' is not supported by language, where Start is my method name.
[Code]...
View 1 Replies
Jul 15, 2010
I've downloaded the MSDN "101 VB Samples" from the MS site and I'm getting an error that reads "The project type is not supported by this installation". I can open the other files that I've tried (about a dozen in other folders), so I'm wondering if it is something specific with the VSTO files, or something about my VB setup.
I thought at first it was a problem with the path where the file is sitting, but even moving it from C:Documents and Settings[my name]My DocumentsMSDN to C: didn't work...Edit: I have also tried opening in notepad and converting the file to UTF-8, changing the File Association from MS Visual Studio version selector to devenv.exe, and running devenv /setup at the command prompt, all with no luck (all these ideas were found through Googling the error message....).
View 2 Replies
