So I have some users that are getting error: This Protocol Version is Not Supported on the following line of code in Red:
Private mobjThread As Thread
Private Sub StartServer()
Try[code].....
I am not able to recreate it on my machine or the 4 other local machines I have tested it on here.
Error Message: "This server version is not supported. Only servers up to Microsoft SQL 2005 are supported VB.NET" I am using VB.NET 2008 and attempting to connect to SQL Server 2008 with XP as the operating system. I have service pack 1 installed in Visual Studio but this error message presists. The articles I have read on this error said to install sp1 as a solution but I have done that and the error persists. FYI, the error does not occur when I am using code to connect to SQL Server but when I attempt to connect using one of the designer wizards this error occure.
View 3 RepliesI recently upgraded the MS SQL Server installed on my personal computer from 2005 Express to 2008 Express. Problem is when I try to add an SQL database file to a project using VS 2005 I get an error message saying that the version of my database server is not supported, I must have SQL Server 2005 Beta 2 or later installed. I didn't do it yet but I'm pretty sure that when I open the other projects that I included a database file to it, I'm going to get the same error.
My question is it possible to have two SQL Servers installed on my machine? If so, is it a good idea to have two DB servers in the same machine?
I have Visual Studio 2008.
When i try to create a new VB project (.exe or .dll - doesn't matter) or try to open an existing one, I receive the following error:
"C:Documents and Settings.....WindowsApplication1.vbproj" cannot be opened because its project type (.vbproj) is not supported by this version of Visual Studio.
To open it, please use a version that supports this type of project.
I tried un-installing Visual Studio and then re-installing again - same result.
It was working fine in the beginning. Between the last time it worked and the first time it didn't - I installed some Oracle tools, not sure if that affected anything. What's interesting - the problem is only with VB projects, C# projects can be created and opened.
I am new to this forum and also to vb.net (am an ex vb6 programmer)..I installed visual studio 2010 premium edition and it works with my own projects BUT trying to open the microsoft Lab5 solution file I get this error:
"/file cannot be opened because its project type (.csproj) is not supported by this version of the application"
Ok, most of my Visual Basic experience I admit was with VB 3 and VB 5. I'm just starting with VB 2005 Express, and get this error when trying to connect to a new database.
I'm using Windows Vista and have the latest Microsoft JET version, so I have no idea why I'm getting that error.
im trying to either download a webpage source or get the source and load it into a variable but i keep getting an error:The server committed a protocol violation. ection=ResponseHeader Detail='Content-Length' header value is invalid
Public Sub DL_webpage(ByVal url As String)
Dim client As WebClient = New WebClient()
Dim stream As Stream = client.OpenRead(url)
[code].....
I'm trying to write text to a file using the following code, but I got the message :
"URI formats are not supported."
Private
Sub
cmdSave_Click(ByVal
sender As
System.Object,
[Code] .....
A client used to work on a desktop application which i have developed a while ago. Recently, his computer got 're-imaged' by the IT department. After that, the application starts crashing at line [Code] giving an error message "No such interface supported". i am using vb.net 2003 and access database. also there is a password on the database file.
View 5 RepliesOn a client's computer I get error 80004002 - No such interface supported.
I am using Vb.Net 2010 to open an Access 2007 database. On my computer the connection works perfectly so it cannot be my coding or it would not work at all. On the client's computer I unstalled a version of my program that was working and installed the latest version of and the error started.
My app fails at this line of code:
Dim objConnection As New SqlConnection(Application("ConnString"))
My connection string is: [Code]. I googled this problem and the solution for it was having a malformed connection string where the "provider" was being specified when it shouldn't have. Example conn string: [Code]. I'm not specifying the Provider so I think I have a different problem.
Code:
Option Explicit
Private Const No_ERROR = 0
Private Declare Function inet_addr Lib "wsock32.dll" (ByVal s As String) As Long
[code]...
ByVal dst As Any, ByVal src As Any-->Error: Any is not supported in declare statements i am currently using visual studio 2005.
I try to use a special font in my programm xxxxxx.ttf (true type font)and i got this error "only tryetype fonts are supported .this is not a true type font "i used it before with same programm but since i installed a very old version of xp i got the error.
View 2 RepliesI've a vb.net class library and my c# application is accessing that method. My C# code gives me compile time error that 'Start' is not supported by language, where Start is my method name.
[Code]...
I've downloaded the MSDN "101 VB Samples" from the MS site and I'm getting an error that reads "The project type is not supported by this installation". I can open the other files that I've tried (about a dozen in other folders), so I'm wondering if it is something specific with the VSTO files, or something about my VB setup.
I thought at first it was a problem with the path where the file is sitting, but even moving it from C:Documents and Settings[my name]My DocumentsMSDN to C: didn't work...Edit: I have also tried opening in notepad and converting the file to UTF-8, changing the File Association from MS Visual Studio version selector to devenv.exe, and running devenv /setup at the command prompt, all with no luck (all these ideas were found through Googling the error message....).
How they relate and differ from each? What are the best practices for version control? Is there a primer about publish online? Or a good book?
And is it possible to make ClickOnce and a msi in one solution of VS 2008? If so, is there any conflict or pitfall?
BTW I am using VB if that makes any difference.
I'm fairly new to the MS Sync framework and have been beating my head against the wall for about four hours now to no avail. I'm simply trying to sync my databases (one "master" SQL Server 2008 with a SQL Server CE, the client) with:
Dim syncAgent As DataCacheSyncAgent = New DataCacheSyncAgent()
Dim syncStats As Microsoft.Synchronization.Data.SyncStatistics = syncAgent.Synchronize()
It works just fine in Visual Studio 2010 and always manages to sync, but now that I'm trying to implement it on my client's computers, I always get the error:
The specified change tracking operation is not supported. To carry out this operation on the table, disable the change tracking on the table, and enable the change tracking.
I have just created a new Extensibility Addin for Visual Basic using VS2005 Professional. This addin will be targeted at MS Outlook (I hope).When I look at the References tab of the project properties, I see the following message:-An error occurred trying to load the page.Unable to cast COM object of type 'System.__ComObject' to interface type 'EnvDTE.ProjectItemsEvents'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{22800963-2811-410D-BF87-A7808EAC977D}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).Why does this appear?How do I correct this?
View 6 RepliesI get an error : The ReadElementContentAsString method is not supported on node type None.trying to parse an xml string from the server, this is my code
Dim reader As XmlReader = XmlReader.Create(New StringReader(sTempUrl))
reader.ReadToFollowing("result")
Dim strResult As String = reader.ReadElementContentAsString()
[code]....
I have this code that I have found on the net and I run but there is error that says "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.". May I know what is the problem?
Here is the code that I get from the net:
CODE:
I have tried to find the sdk ('Windows Software Development Kit') mentioned in the 'GIF Encoder and Decoder Sample', but there are so many SDKs I can't find the one I need. I am using visual Studio 2005 Standard Edition on Windows XP. The language I program in is VB. Can someone point me to the right SDKs for the sample and OS and VS version?
View 3 RepliesI need to ping to a port. It is working, then I tried multi threading. I need to show the result in richtext box, but it shows error.
The code is
Imports
System.Threading
Public
Class Form1
Dim t As Thread = New Thread(AddressOf Me.ProcessBioAdmin)
[Code] .....
Error got is:
Cross-thread operation not valid: Control 'RichTextBox1' accessed from a thread other than the thread it was created on.
im new to vb.net 2003 but have used vb 6 for years and dabbled with 2005. A program that would usually take me a few hours to make i am on day 5, 4 and a half of which have been trying different ways to get it to update, and not one of them will post the information back to the SQL 2000 database I am actually going insaine.
The best i can get out of it is this error. "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information" I have googled it and come up with the fact the primary key isnt set right, but i still cant get that to work. Here is the peices of code that are relevant.
[Code]....
When this code segment execute
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Validate()
Me.myDA.Update(Me.myDataSet.Tables("Table1"))
Me.myDataSet.AcceptChanges()
End Sub
It giving the following error. Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information. Can there is another way to update the access database by using datagrid view.
I'm upgrading some code from VB2003 to VB2010. I'm now getting an error when I try to close a form from a media player event.
[Code]...
Wheres my error on this code...
Imports System.Net
Imports System.Threading
Public Class Form1
[CODE]...........
Basically what I want to do is that User will select how many thread w/c is the PickThread.value, then it will do the stuff.
i have tryed using multithreading with my program with no luck/I just get a strange error thrown at me no matter what i try [code] Then i get this error:An error occurred creating the form. See Exception.InnerException for details. The error is: ActiveX control '6bf52a52-394a-11d3-b153-00c04f79faa6' cannot be instantiated because the current thread is not in a single-threaded apartment.
View 13 RepliesI'm running a program where I call a function which creates a database connection and then runs a stored procedure. I call this function four times from four separate threads. I get an error (Login failed for user 'sa'. The user is not associated with a trusted SQL Server connection.
Exception Source:
.Net SqlClient Data Provider)
when I use multiple threads, but if I have the threads run one after another I have no
[code].....
Multi threading in vb.net, in one of our program I provided an automatic error notification system that gives alert to my email when an exception error is occurred. The error notification includes the name of the form, the exception error details, the event name and the screenshot of the software during that particular instant.
View 6 RepliesI'm trying to install Visual Basic Express edition 2010 on my windows Vista computer. The .net framework 4.0 is installed (or so the control panel says), but the visual basic installation fails every time it gets to "Microsoft Visual Basic 2010 Express," which is the first item to be installed. before installing, I uninstalled the .net framework 3.5 along with vb and c++ 2008 express editions.First, I get the following error message 7 times in a row: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package.
The error code is 2908.Then, I get the following error message: Error 1935.An error occurred during the installation of assembly'msddslmp,version="10.0.0.0",publicKeyToken="b03f5f7f11d50a3a",processorArchitecture="MSIL",fileVersion="10.0.30319.1",culture="neutral". refer to Gelp and Support for more information. HRESULT: 0x8002802F.Then, the installer quits, with the screen: Setup could not install the following component:Microsoft Visual Basic 2010 Express - ENU?