Equivalent Of C# Code In VB?
Nov 24, 2010The code in C# is as follows:private void comboBox1_SelectedIndexChanged(object sender, EventArgs e)
[Code]...
The code in C# is as follows:private void comboBox1_SelectedIndexChanged(object sender, EventArgs e)
[Code]...
private bool txtRegExStringIsValid(string textToValidate)
{
Regex TheRegExpression;
string TheTextToValidate;
[code]....
Schema is a string, lstSchemas is listbpb and rc is a variant
Schema = VB6.GetItemString(lstSchemas, rc)
I find that when I have the string
in cell (1,1)
and in Excel I put in cell(2,1) the formula
= code(mid(A1,1,1))
I get the result 63, which I should.But in visual basic, when I write
v1 = .cells(1,1)
.cells(3,1) = v1
msgbox asc(mid(v1,1,1))
the message returns 65, which is the code for A, not Ā.It is clear that VB is reading the contents of cell(1,1) correctly because it puts the correct text in cell(3,1).The Code function isn't supported in Visual Basic. I have been unsuccessful trying to use Application.code It won't compile. How can I get VB to give the correct code of the character Ā?
What is the equivalent vb.net code of the following?
using System;
using System.ComponentModel;
using System.ComponentModel.DataAnnotations;
namespace ContosoUniversity.DAL
[code]....
Following is the OnCallBack (async communications handler method) in C# and translated to VB.NET.The c# one works fine, but the VB.NET one gives a compilation error: "Property access must assign to the property or use its value." The error happens on the following line:
state.CallBack(Me,
New
ClientEventArgs()
With
[Code]...
got this code from this site: [URL] public static void Send(String from, String to, String subject, String messageText).
SmtpMail.Send("mcb@mindcracker.com", "webmaster@mindcracker.com", "Subject", "Message body").
what's the equivalent code of this in vb express 2010.
I'm working on a tutorial to build a media player in Silverlight and am trying to wire up an EventHandler to the timer.Tick event of a DispatchTimer object so that the time of the video is synced with a Slider object.
The sample code is in C# and I can't for the life of me figure out the proper syntax in VB.NET with RaiseEvent and/or Handles to wire up the event. Below is the relevant C# code. I'll include comments on where I'm getting stuck.
[Code]...
In cell A1 of Sheet2 I have the following text [code]how to I get VB to recognize that the 4<sup>th</sup> character of the string has character code 63?
View 3 RepliesIn the GUI world, OpenFileDialog provides one stop shopping for the user to select the drive, the folder and then the file.Has anyone seen a set of code to implement this functionality (although obviously one value at at time /select drive/selectfolder/select file) in a console application?
View 1 RepliesIn VB.NET:
DataTable.GetChanges(Not DataRowState.Deleted)
What is the equivalent in C#?
How do I write the equivalent c# code below in vb.net? This 'About' form is launched by a ToolItemMenu. It is just informational and contains only an OK button
//Form contains company logo, copyright info and OK button.
public About formAbout;
using (formAbout = new About())
[code].....
I'm a C# programmer constrained to write VB.NET code.While exploring NHibernate further for my current client, I encountered FluentNHibernate, which I find real attractive.But now, I wonder how to "translate" this C# code for component mapping into VB.NET code:
Component(x => x.Address, m =>
{
m.Map(x => x.Number);
m.Map(x => x.Street);
[code]....
what I miss is how to continue with the brackets in VB.NET, since there's no Begin End keywords or so.
EDIT 1: Following Mr. JaredPar instructions, I figured that his solution might work. If we take the time to read his answer, we may notice that we both don't know what the MType is within his solution. I might have found out that the MType is:
FluentNHibernate.Mapping.ComponentPart(Of TComponent)
Thus, TComponent is, from my understanding, an anonymous type that I shall parameter to use. From this point of view, since I wish to map the properties of my Address object, replacing TComponent in my help method signature seems not to work.
Private Sub MapAdresseHelper(Of Adresse)(ByVal a As FluentNHibernate.Mapping.ComponentPart(Of Adresse))
a.Map(Function(m) m.Number)
a.Map(Function(m) m.Street).Length(50)
[code]...
The error I get is that my Address class doesn't have a property member named Street, for instance. It sees my Address type, it recognizes it, but it seems buggy somehow. I guess VBNET is poorly designed for lambda expressions and is less evolved than C#?
if (node.Attributes != null) //checking for attributes of a xml file node.
View 4 Repliesanyone knows the equivalent code for App.TaskVisible in VB.net? App.TaskVisible is from VB6 which hides the application in the applications list in task manager and not in the processes list tab.
View 1 RepliesI know that AndAlso is equivalent to && and OrElse is equivalent to ||. But what is the cleanest way to achieve the equivalent of Visual Basic's And and Or in C#?For example, consider the following VB.NET code.The ValidateForControl method performs some validation and returns whether the state of the specified control is valid. The entire input form is valid if all controls are valid. However, each control must be individually validated even if one is invalid (which requires the operator not to short-circuit). Visual Basic's And operator is perfect for this situation, but unfortunately there's no equivalent operator in C# as far as I know (&& short-circuits).
[Code]...
I am Validating a TextBox on it's KeyPress Event in VB.
VB.Net
If InStr("0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz`~!@#$%^&*()_+|[]{};:<>/?,.'" & """" & Chr(8), Chr(KeyAscii)) = 0 Then KeyAscii = 0
What will be it's equivalent in C# ?
Let me know how can i use this Err in c#.This is VB Code:
If Len(sPart1) <> PART1_LENGTH Then
Err.Raise(vbObjectError, , "Part 1 must be " & PART1_LENGTH)
[code]......
What I am trying to do is to check if a value matches one of two numbers (and easily be able to add to the numbers to compare to). Rather than doing a longer-winded way such as: [Code] I have found that this only works when SectionID is 2 or PageID is 8. If SectionID is 3 or PageID is 12 then it doesn't work. Why is this and what can I do to try to get around the problem?
View 3 Replieswhat is the equivalent for OLE in .net
View 1 RepliesI'm normally at home in C#, and I'm looking at a performance issue in some VB.Net code -- I want to be able to compare something to the default value for a type (kind like C#'s default keyword).
[Code]...
I am relatively new to Visual Basic. When it comes to logging, in Java I use log4j for logging.What is the equivalent in Visual Basic and can you please guide me to a good tutorial?
View 1 RepliesI've got a large codebase which I'd like to expose to plugin authors to allow them to use VB.Net Express to code plugins for a server app, which is not available to them. My problem is that even with obfuscation, I'd rather not distribute the complete app and/or dlls, as even with obfuscation peeling apart a .NET assembly and puzzling out code is relatively easy to do. I'm interested in this because the licensor I obtain the code from requires me to protect IP and assets and while distributing .NET apps opens up the app to disassembly, keeping the server app private and allowing users to utilize a skeleton dll to code against is a happy medium.
What I'm looking for is some way or a utility to go through my server app source code and create a codeless version of the app which only contains method and property signatures.The intent is to provide a stub .NET dll for them to add as a reference and code against as if they were directly interacting with the server, without actually providing the server code to them, compiled or not. I can of course do this by hand but there are over 90 classes and hundreds of thousands of lines of code I'd rather not spend a week hand tweaking. Also, this presents a problem whenever new methods or code are added to the project. Finally, two separate projects is an even worse scenario.Because people will post suggestions that have little or nothing to do with the question, here's a short, clear example. I want to turn this class:
Public Class MyServer
Public ReadOnly Property Name() As String
Get
Return "Whatever"
[code].....
What is the vb.net expression of this c# expression ?
Frame.GetController<ShowNavigationItemController>().CustomShowNavigationItem += new EventHandler<CustomShowNavigationItemEventArgs>(WindowController1_CustomShowNavigationItem);
I'm looking at some old ASP code that contains the following:
Set objDSE = GetObject("LDAP://RootDSE")
Set objSysInfo = CreateObject("adsysteminfo")
Set objUser= Getobject("LDAP://" & Replace(objSysInfo.UserName,"/","/"))
dtmValue = objUser.PasswordLastChanged
[code]....
This is for an intranet app that uses integrated authentication. Is there a replacement for the ASP adsysteinfo object? I can probably port most of the LDAP calls using System.DirectoryServices.DirectoryEntry, but is there a better/easier way to do this in ASP.NET (VB.Net or C#)? how to convert the ASP object properties to DirectoryEntry properties?
I have made an application in vb6 abd now trying to do the same in visual studio 2005. In vb6 i was using MSFlexgrid and its .Textmatrix properties. Would like to know what is the .Texmatrix equivalent for .net. When i pasted the code form vb6 i get the following error...
'TextMatrix' is not a member of 'AxMSFlexGridLib.AxMSFlexGrid'
Is there an equivalent to C#'s MVC [Bind(Include="Title,Description")] in VB?
View 1 RepliesWhat is the equivalent of Program.cs in VB.NET WinForms application?I need to move my .CS app to VB.NET.
As I do not have forms in my WinForms project in Program.cs I do the following:
Application.Run(new MyForm(parm1, parm2);
How to move this code in VB.NET?
In .net (c# or vb) expressions, how would you implement SQL's handy IN() functionality?i.e. value in (1, 2, 4, 7)rather than:
value = 1 or value = 2 or value = 4 or value = 7
There are obviously many ways, I'm looking for the most clean and simple!
Possible Duplicate: How do I specify the equivalent of volatile in VB.net? What is the VB.NET keyword equivalent of C# "volatile"? If there is no keyword what mechanism is the equivalent?
View 4 Replies