I create a Visual Basic .net console application where my file paths are in the app.config file. When I run it from a command prompt a windows scheduler it works fine. When I run it from a purchased job scheduler, I get a message stating that it cannot find MyAppli~.config. MyApplication.config is present.[code]...
View 1 Replies
I am creating a custom config section that will allow me to manage what ELMAH exceptions I want to ignore from my VB.NET/ASP.NET app. Here's my code. I made it easy to paste in a blank code file if anyone's up to the challenge of diagnosing the problem.
CODE:
When I execute this code:
CODE:
I get the error An error occurred creating the configuration section handler for IgnoredExceptionSection: Could not load file or assembly 'WEB' or one of its dependencies..
What boggles my mind is that this all works fine in my C# console test app after I convert the code from VB.NET using a web utility. However, when I paste the VB code from my web app into my VB.NET console test app, it doesn't work there, either, so it appears to be a C#/VB issue. What am I doing wrong here?
I am working with a old windows app (vb.net), this was working fine before with the old out look (owa) now we moved to 2010 outlookweb acess, after movingis application is unable to sync the exchange applications to web.
Dim
req As
Net.HttpWebRequest
[code].....
IDE :: error creating the web proxy specified in the 'system.net/defaultproxy' configuration section.
View 6 RepliesWTF, here's my code...
Public Class Form1
Dim BIT01 As Integer = BIT_01.Text
Dim Value As Integer = TB_OutPut.Text
[code].....
I'm having this problem with my code and cannot seem to get past it although it was working fine before. The error is "An error occurred creating the form. See Exception.InnerException for details. The error is: Object reference not set to an instance of an object." The code is:
CODE:
I am trying to get information to be pulled out of a database and show in text boxes on another form (frmviewsdets). The error occurs when it gets to the line frmviewsdets.txtsnumber.Text = rdr("StudentNumber") and even when a breakpoint is applied there it just moves on to the next and so on.
I have tried to show frmviewsdets before I pull the data out of the database beut I get the same message.
MVC 3 razor VB.NET project. I have resorted to manual building a list for a drop down box so I can insure certain values are available in the select list and also to control what the first item is in the list. The below is my code snippet for the part that is giving me problems..
[Code]...
The program I am building requires a lot of initial user input. I was wanting to stream line this by creating a 'config' file so to speak that after the user enters all the initial data they can click a button that will save their entries into a secure file. When they leave for the day and come back they can click the load button and it auto fills in all the relevant data that will be stored in the file.
Still digging through the MSDN for help, but no luck on options yet.
I was thinking save the information to a text file somehow, but passwords will be stored and I would like to make it secure if possible.
I'm trying to log an object in log4net using a custom renderer. My configuration file has the following line:
<renderer renderingClass="LogLibrary.Log4NetObjRenderers.PdaLogObjRenderer" renderedClass="LogLibrary.TranferObjects.PdaLogObj" />
But I get a TypeLoadException when loading the configuration file, and log4net internal debugging gives this detail:
log4net:ERROR OptionConverter: Could not instantiate class [LogLibrary.Log4NetObjRenderers.PdaLogObjRenderer].
System.TypeLoadException: Could not load type
[Code].....
I got this error when running my program. I wasn't like this before when I'm creating this program.
An error occurred creating the form.See Exception.InnerException for details. The error is: Object reference not set to an instance of an object.
[code]...
Receive 'ConfigurationManager' is not a member of 'Configuration' in VS2008.I read all of the topics in the forum about this error Tried adding areference to System.Configuration.dll to the project and an "Imports System.Configuration" to the vb file.Still get an error
View 7 RepliesI am getting the below error message in my WCF service. Below is my web,config. I have tried a few things and nothing has resolved the error.[code]
View 2 RepliesI am trying to send email with gmail smtp server and am getting this error even whe using different accounts to test
Dim myMail As New MailMessage
myMail.To.Add(New MailAddress("myemail@yahoo.com"))
myMail.Subject = "subject"
myMail.From = New MailAddress("fromemail@gmail.com")
[code]....
An the error am getting
451 4.7.1 Local configuration error, please try again later
I got an ASP.NET app from someone who used to run it on his IIS on Windows XP (I don't know which IIS version he has).When I tried to deploy it on my IIS (v7.5 - Windows 7) - I can't open its default.aspx file and I get the following error page:
HTTP Error 500.19 - Internal Server Error
Error Code 0x80070021
Config Error : This configuration section cannot be used at this path. This happens when the section is locked at a parent level. Locking is either by default (overrideModeDefault="Deny"), or set explicitly by a location tag with overrideMode="Deny" or the legacy
allowOverride="false". Config File
C:inetpubwwwrootweb.config
Config Source:
I have a VS Solution with several projects. I want to set a specific project to the start project in Debug mode. Everything seems to run fine as I set breakpoints on the initial Form and several initialization procedures. At one point however, I get this error which is not an issue when I compile and run the release version.
Here is an illustration of the Exception. Unrecognized configuration section configuration. (C:...path...File.vshost.exe.config line 25) The config file is listed below an the jit debugging = true statement is on line 25
[code]....
I'm trying to open an .exe file via vb code using this method: [Code] But I get the following error message: "Cannot open the configuration file patch.cfg", How can I get round this? Do I need to concurrently open the exe and cfg file? If so, how?
View 12 RepliesWhat is wrong with my app.config. Started getting the error when I added the log4net and configsections.
Error: Configuration System Failed to Initialize
Line of code
[htm]
MessageBox.Show(ConfigurationManager.AppSettings("DBFile"))
[/html]
[code]....
I have recently downloaded and installed VS2010 evaluation copy. I loaded a VS2002 programme I have been working on and until today it compiled and ran fine. Now I get this error. "Error while trying to run project: Unable to start programme "c:CreateF1ScreensinCreateF1Screens.exe.
This application has failed to start because the application configuration is incorrect. Review etc etc"
im tying to use settings in visual basic; i have my sentence in the settings; i want to program a click event in order to appear that sentence in a textbox, after the click i i have this error [Code] "failed system boot configuration".
View 12 RepliesI'm trying to create a pivot table by opening an Excel file from my drive.But I'm receiving the error saying "Object reference not set to an instance of an object".[code]
View 1 RepliesAn error that arises when I take a vb project Visual Studio 2010 that works on my local machine to a server. How precisely would I work around it?
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
Line 24: ASP.NET to identify an incoming user.
Line 25: -->
Line 26: <authentication mode="Windows" />
Line 27: <!--
Line 28: The <customErrors> section enables configuration
I got the below code from Deborah Kurata one of the msdn moderator on her webpage. Her code is to save the form size at runtime but i would like to modify it to save the buttons which i have dragged and drop. I tried to modify the code but i tend to when i put the Dim theButton = DirectCast(sender, Button) under the form load method. It put there cannot cast object. something like that.
Public Class Form1
Dim tm As New Timer
Dim Index As Integer = 0[code].................
I have below installer class to ngen app after installation and I'm getting several errors.
Imports System.Collections
Imports System.ComponentModel
Imports System.Configuration.Install
'This line gives warning: Namespace or type specified in the Imports
[code]....
I am having some trouble creating an object array of different object types. Here is what I have so far:
Public Sub New()
Dim b1 As New Book("Book Title 1", "Gold Book Publisher", 1.0, "Bob Jones", "192DJDJD212", "01/02/10")
Dim b2 As New Book("Book Title 2", "Gold Book Publisher", 1.0, "Bob Jones", "192DJDJD212", "01/02/10")
Dim b3 As New Book("Book Title 3", "Gold Book Publisher", 1.0, "Bob Jones", "192DJDJD212", "01/02/10")
[code]....
If I define the array As Book (Public publicationArray(6) As Book) or Magazine (Public publicationArray(6) As Magazine) I am able to access the properties of that class but not both. I think I need to define a type for each array instance but not sure how to do this.
I have a web service created with vb.net in vs 2010. Here is a look at my property
Public Class MyClass
Inherits ConfigurationSection
Protected _score As Integer
[code].....
When I try to add this as a service to a web app, also done in vs2010 with vb.net, I get the error in the title. Please help with this. I am not sure what is needed in order to implement a default accessor.
I have a project that reference from leadtools 16.5, and after that, i want to run my project..i see am error like it " An error occurred creating the form. See Exception.InnerException for details. The error is: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. im using vb 2008 pro
View 6 RepliesI have 3 components :
1.Manager : dll containing Iterface definition and other things
2.Implementation: dll containing Implementation of the Interface
3.Executable: (maybe this one could be a external application or another dll using the libraries)
I have particular methods (iside the interface dll file) that extract information of real Implementation from AppSettings keys in order to instance it using reflection. I use the Manager inside the Excecutable, but when I try to retrieve a especific key defined in "Manager.dll.config" (appSettings), the value returned is empty because the configuration file used is "Excecutable.exe.config" I need this configuration information in Manager config file because this Manager will be used from other programs and the configuration must be centralized into that config file to replicate the possible changes to every app calling this dll.How can I to specify that the ConfigurarionManager.AppSettings must extract values from manager.dll.config file?
I try to compile a project with msbuild.exe I have this error :
vbc : error BC30136: Error creating Win32 resources: Error reading icon '"Recycle Bin Empty.ico"' -- The filename, directory name, or volume label syntax is incorrect.
This icon is the Application icon which is in the same directory of the project.vbc is started with /win32icon:"Recycle Bin Empty.ico" parameter.Don't know why MSBuild can't reach the file.
i am using VB.net 2003 and i am trying to get the number of rows of a dataset from form1 into form2 in order to use it for something else and i am getting the error"System.NullReferenceException occured...Additional information: object reference not set to an instance of an object"...my code is like this:in form1:Public x as integer= me.dataset.table.rows.count here it gives me the error
in form2:
dim frm as new form1
msgbox(frm.x)
I am getting this error when I try to print my report. Here is my print code.
Private Sub PrintToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles PrintToolStripMenuItem.Click
Dim Print_Dialog As New PrintDialog
[code].....
Here is my error: System.NullReference Exception: Object reference not set to an instance of an object.
