I have recently downloaded and installed VS2010 evaluation copy. I loaded a VS2002 programme I have been working on and until today it compiled and ran fine. Now I get this error. "Error while trying to run project: Unable to start programme "c:CreateF1ScreensinCreateF1Screens.exe.
This application has failed to start because the application configuration is incorrect. Review etc etc"
I have seen a similar post under C++ but after reading that post and many others I have been unable to find a solution for VB VS2008.I have just ported one solution withseven projects from VS2005to VS2008. All seemed fine at compile time but when I attempted to step into the code in the debugger I received the following error:
View 1 RepliesI am creating a custom config section that will allow me to manage what ELMAH exceptions I want to ignore from my VB.NET/ASP.NET app. Here's my code. I made it easy to paste in a blank code file if anyone's up to the challenge of diagnosing the problem.
CODE:
When I execute this code:
CODE:
I get the error An error occurred creating the configuration section handler for IgnoredExceptionSection: Could not load file or assembly 'WEB' or one of its dependencies..
What boggles my mind is that this all works fine in my C# console test app after I convert the code from VB.NET using a web utility. However, when I paste the VB code from my web app into my VB.NET console test app, it doesn't work there, either, so it appears to be a C#/VB issue. What am I doing wrong here?
System.InvalidOperationException was unhandled.
An Error occurred creating the Form. The error is: The Parameter is incorrect
Receive 'ConfigurationManager' is not a member of 'Configuration' in VS2008.I read all of the topics in the forum about this error Tried adding areference to System.Configuration.dll to the project and an "Imports System.Configuration" to the vb file.Still get an error
View 7 RepliesI have a problem with this visual basic statement every time it runs it gives me an error saying: incorrect syntax near? ive checked i a lot of times and i still cant find the problem.. heres the statement:
Sub InsertNewRecord()
Me.Text = "Inserting New Record"
Dim cmdInsert As New SqlCommand
[Code]....
I am getting the below error message in my WCF service. Below is my web,config. I have tried a few things and nothing has resolved the error.[code]
View 2 Replieshow to add and use configuration file in the vb.net application like web config file can i change the value in the configuration file
View 14 RepliesI am trying to send email with gmail smtp server and am getting this error even whe using different accounts to test
Dim myMail As New MailMessage
myMail.To.Add(New MailAddress("myemail@yahoo.com"))
myMail.Subject = "subject"
myMail.From = New MailAddress("fromemail@gmail.com")
[code]....
An the error am getting
451 4.7.1 Local configuration error, please try again later
I've got a GridView. My SelectCommand in the code works if I copy and paste it into SQL Server Management Studio. It executes fine.If I run the page and click Edit for any row I get the error:
"Incorrect syntax near the keyword 'IS'."
I've tried to see what's going on using SQL Server Profiler. Here's what the SelectCommand looks like and what SQL is receiving...
SelectCommand from supplies.ascx
SELECT some stuff FROM here WHERE (this IS NULL) and (that=1) ORDER BY this DESC
SQL Server Profiler reports
SELECT some stuff FROM here (this IS NULL) and (that=1) ORDER BY this DESC
I didn't put any code here because I'm not really sure what would be relevant and didn't want to load up the post with unnecessary lines of code.
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="fldSupReqID"
DataSourceID="SqlDataSource1"
EmptyDataText="There are no data records to display." AllowSorting="True"
[code]....
I create a Visual Basic .net console application where my file paths are in the app.config file. When I run it from a command prompt a windows scheduler it works fine. When I run it from a purchased job scheduler, I get a message stating that it cannot find MyAppli~.config. MyApplication.config is present.[code]...
View 1 RepliesI am trying to create INSERT SQL using WHERE syntaxing in order to ensure no duplication with the SQLCMD.PARAMETER but the WHERE clause generate this error message:Incorrect syntax near the keyword 'Where'.
Here are the coding:
Dim strSql As String
strSql = "Insert into tblCustomers "
strSql &= "(CustomerID, ContactName,Address,City,PostalCode,Country)"
[code]....
i am having an sql query in catch block. the code is:
Dim str_exception
As
String = ex.Message
Dim sql5
As
[Code]...
cmd = New SqlClient.SqlCommand("select(pname,MRP,rate,dis) from stock_table where pid = '" & Val(ComboBox1.Text) & "'", con)
adapter.SelectCommand = cmd
adapter.Fill(ds1)
I am getting the error in the last line ..
On the compile tab of the project properties: If you look at the configuration dropdown it typically shows debug/release/active/all. I attempted to add another option at one point in the build->configuration manager window, but decided that I didn't want to keep it. I removed it there, but it keeps showing up in the dropdown on the properties, as well as generates a folder by that name.
Does anyone know how to remove this? I can't find any "delete" or otherwise options.
Does anyone have or has anyone come across an in depth guide to the .net app.config? I'm having significant issues trying to find a definitive guide to this area of .net.I can already handle custom configuration sections, from basic key/value pair settings right through to complete custom configuration handlers which I struggled to find information on, but I cannot find any documentation regarding basic native .NET functionality of the configuration file...for instance, with regards to BCL configuration. I've gone through the machine.config.comments and the config.xsd files and it has provided a little insight but not enough to fully grasp the full potential of the config file. I've also trawled through everything I can find on Safari and only managed to come up with a couple of useful tidbits that I wasn't previously aware of but it seems this area of .NET is extremely poorly documented and unless you have a very specific purpose in mind, it's useless trying to find information on it.
View 1 RepliesI have an ASP.NET application. It resides within another ASP.NET application. I put my DLL in the other apps bin folder and have a subdirectory with my aspx files. I can't edit the main app's Web.config.
So where can I store configuration settings? For example, this is an app that will get deployed to various clients. I want to store the client name used for display in the headers and such. And the location of a logo file.
I got an ASP.NET app from someone who used to run it on his IIS on Windows XP (I don't know which IIS version he has).When I tried to deploy it on my IIS (v7.5 - Windows 7) - I can't open its default.aspx file and I get the following error page:
HTTP Error 500.19 - Internal Server Error
Error Code 0x80070021
Config Error : This configuration section cannot be used at this path. This happens when the section is locked at a parent level. Locking is either by default (overrideModeDefault="Deny"), or set explicitly by a location tag with overrideMode="Deny" or the legacy
allowOverride="false". Config File
C:inetpubwwwrootweb.config
Config Source:
I am having a dataview based on a datatable. when i am trying to insert the values into database table, i get an "Incorrect Syntax Error Near =". What could be the reason? Since this error is an sql based error, should i look for the root of this issue in Data Access Layer only or elsewhere?
View 2 RepliesI have a VS Solution with several projects. I want to set a specific project to the start project in Debug mode. Everything seems to run fine as I set breakpoints on the initial Form and several initialization procedures. At one point however, I get this error which is not an issue when I compile and run the release version.
Here is an illustration of the Exception. Unrecognized configuration section configuration. (C:...path...File.vshost.exe.config line 25) The config file is listed below an the jit debugging = true statement is on line 25
[code]....
I'm trying to open an .exe file via vb code using this method: [Code] But I get the following error message: "Cannot open the configuration file patch.cfg", How can I get round this? Do I need to concurrently open the exe and cfg file? If so, how?
View 12 RepliesWhat is wrong with my app.config. Started getting the error when I added the log4net and configsections.
Error: Configuration System Failed to Initialize
Line of code
[htm]
MessageBox.Show(ConfigurationManager.AppSettings("DBFile"))
[/html]
[code]....
I have a problem with my webserver connecting to SQL server.I have setup the connectionString and everything is okay. Except that I kep on getting the following error message:
Logon failed.Details: 01000:[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionRead (recv()).Query Engine Error: '08S01:[Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.'Logon failed.Error in File C:WINDOWSTEMPCouncilDistrict {4F892A8B-2AC6-4302-8A58-1466157C3ED7}.rpt:Unable to connect: incorrect log on parameters.
Dim adapter As New SqlDataAdapter("SELECT price, product FROM" & txtstore.Text & "WHERE barcode='" & txtbarcode.Text & "'", con)
[Code]...
I dont the msgbox to be sure that correct string is being passed to it and it is.. But I got an error at the "adapter.fill(txtstore.text)" saying Incorrect syntax at 'barcode'.
i want to enter date in the format of dd/mm/yyyy (30/03/2009) in a textbox. when a click on the button, if nothing or wrong format is enter, will pop up msgbox saying wrong format.
View 14 RepliesI've been programming a game recently and didn't want to make 99 weapons manually. I've tried making a loop do this for me. I've got the loop working, everything is perfect. But when I run the program and list all the Weapon(x).Name [x being any value between 0 & 99] they are all identical... HOWEVER. If I single step through the code it lists all the names from 0 to 99 perfectly fine. Why is it that single stepping through it produces what I want?
Private Sub CreateWeaponList()
Dim StatName(4) As String 'Creating 4 pre-made names for weapons
Dim WeaponName(4), RandomWeaponName As String 'Creating 4 more pre-made names for weapons
For x = 0 To 32
Weapons(x).Type = "Sword"
[Code] .....
Is anyone aware of a way that I can set application (or user) level settings in a .Net application that are conditional on the applications current development mode? IE: Debug/Release To be more specific, I have a url reference to my webservices held in my application settings. During release mode I would like those settings to point to [URL] during debug mode I would love those settings to be [URL]
View 2 RepliesFilePath for the Current Application's Default Configuration
View 3 RepliesFilePath for the Current Application's Default Configuration .I am writing several DLL's that each have their on configuration file. I am trying to set the Application Default Configuration to be the DLL's Default Configuration - not the EXE's Default Configuration. How can I determine the pathfile for the current Application Default Configuration??I have tried using FILEPATH of SYSTEM.CONFIGURATION.CONFIGURATION but can not get the syntax correct.
View 1 RepliesSo i'm trying to create a save configuration file and I found the Application Configuration file which seems like it'll do what I want it to do what
View 3 Replies