Is anyone aware of a way that I can set application (or user) level settings in a .Net application that are conditional on the applications current development mode? IE: Debug/Release To be more specific, I have a url reference to my webservices held in my application settings. During release mode I would like those settings to point to [URL] during debug mode I would love those settings to be [URL]
View 2 RepliesI have a custom control that as a custom property. The property has several preset values to chose from a drop down. The control can be added to a form. The property can be viewed and set in the properties box in the IDE. It all works fine.
Here's the problem: I can create new versions and recompile the control and/or the application without the properties preset value being lost as long as I do it in Debug mode. However, once I try to recompile in Release mode the custom property values predefined setting is lost. I first thought it was something with going from debug mode to release mode. But it seems to be ANY time I recompile in Release mode the custom property values are lost. Is this a quirk in VS that needs a configuration setting, etc. to get around it?
From my DLL project I have succeded in making AutoCAD launch by pressing F5 from VB.net IDE (Visual Studio 2008) en route to try to make debugging of the DLL easier ...
... however one last obstacle is currently in the way and the obstacle is that for some reason when I hit F5 and AutoCAD is launched my breakpoints are not recognized at all... and program runs from start to finish instead of allowing me to debug ...
It issues a strange message which says "The following module was built either with optimizations enabled or without debug information... to debug this module, change its project build configuration to Debug mode..." and it is all weird because as far as I know I am not in release mode .. but in debug mode (anyhow I am relatively new to Visual Studio .NET so I am thinking that my impression could be that I am in debug mode when in actuality I maybe in release mode)...
Here is why I think I am debug mode ...
1. From Solution explorer ... when I click on the Solution Name and view its properties ... the Active config property says Debug|Any CPU
2. When I look at the properties of the project and look at the compile tab it says that the Configuration is Active (Debug) and under Platform it says Active (Any CPU).
3. Under the Advanced Compile Options of Compile Tab from project properties ... Enable optimizations is UNchecked ...
Anyhow with all the settings mentioned above it seems that I have everything okay but then the message above proves otherwise ... and so at this point I know that I am still missing something ... like a setting somewhere... wondering what else do you think am I still missing?
As additional info...there are seven projects in the solution and it is the main one (the one that I set as startup project) whose properties I refer to in all the paragraphs above.
where is the configuration of vb.net? because I Need to set a User for the checker Role before go to verifier .. my boss told me if i will set it to config or i will hardcode it to set a new checker
View 1 Replieswe have several applications in Vb.Net using the built in log system (My.Log) to write log information. Until now this system was configured by the application.config file before execution but now we want to let the user to choose some options.
Is there a way that does not requires to parse the XML file and process it? Is there available something like My.Settings that will do the dirty job done?
An example would be to be able to modify the DefaultSwitch value from Verbose to Warning or changing a property of the FileLog like the maxFiles attribute:
<switches>
<add name="DefaultSwitch" value="Verbose" />
</switches>
<sharedListeners>
[Code]....
Coding in VB.net in VS 2010. I have:Imports System.Configuration and I added a reference to System.Configuration.
When
**MsgBox(ConfigurationManager.AppSettings("sDBName").ToString)**
[code]....
Every .NET project I've worked on uses an app.config file for its configuration. Fair enough. "is there a better way?" (in the spirit of continual learning of course)I guess my specific questions are:
Does it matter either way if I use app.config or settings file?Are there any scenarios where settings files should not be used e.g web sites where you should use a web.config instead?Other than not having to edit xml, are there any other benefits gained by using settings instead of app.config, e.g. its easier to deploy or maintain apps etc.
Clarification: I'll put this question another way: Can I completely ignore app.config files if I want to and keep all the configuration in a settings.cs file and interact with configuration via the designer only?
i am using visual studio 2005 on win 7 with office 2007. i have developed win application. i am using microsoft activex spreadsheet component in my program. so it automatically creates reference to AxInterop.OWC11.dll When i run program in debug mode (open program and click RUN in toolbar it works) but if i run directly .exe (go to bin elease doubleclick .exe) it give error at loading point of that component. It says "Attempted to read or write protected memory. This is often an indication that other memory has been corrupted." An unhandled exception occurrs.
[Code]...
I have a VS2010 solution with a Settings.settings file. The user settings are saved to the Local Settings folder and this is a problem as these settings do not roam.Currently the settings file is saved automatically to:
Dim config_initial As System.Configuration.Configuration = System.Configuration.ConfigurationManager.OpenExeConfiguration(System.Configuration.ConfigurationUserLevel.PerUserRoamingAndLocal)
[code].....
I am writing a program to automatically switch my proxy address based on the network I am connected to.
I have so far got everything to work except the part that I have highlighted below.
Is there any way to change the automatic configuration script and the automatically detect settings in code?
The solution can be either P/Invoke registry editing. I just need something that works.
I am developing an application, and i need to store some configuration settings, with time, i will need to add some more configuration settings. Am thinking of three alternative to implement that will me easy to access without much coding and efficient sqlite, xml, and application configuration file..But am concerned about security, because some personal data will be saved together.
View 2 Replieswhy when I use My.Settings to Add items during design mode, they do not show up during run mode?
This is for a custom control.
I'm missing something between the control that exists on a Form during design-mode and the (apparently new) control that's created during run mode.
I can add items in design mode using the Application Settings editor (right-click on custom control, select Properties then Settings). But when I use code in a smart panel during design-mode along with My.Settings.MyProperty.Add() to add additional items, the new items show-up in design mode but revert back to the old set during run-mode.
What is the real mode , protected mode , supervisor mode and the hypervisor mode ?
View 1 RepliesI would like to find out what the current windows sleep mode setting is i.e. Is it switched on and what is the timer period. My preferences (in order) are:
.NET Managed Code
API
Read Registry Value
I have seen a similar post under C++ but after reading that post and many others I have been unable to find a solution for VB VS2008.I have just ported one solution withseven projects from VS2005to VS2008. All seemed fine at compile time but when I attempted to step into the code in the debugger I received the following error:
View 1 RepliesI just wondered if you can or can't save arrays using the settings system object. There seems to be no way of entering it at designtime. It seems implied you cannot create new user settings.subobjects at runtime. I'm looking to find the easiest way to save a populated array of PictureBox's. If the only way is a self/custom made/managed .ini file then I need to know so i can start on that but I was hoping to use some of all this phaff in the new frameworks usefully.
View 3 RepliesIs there a way to maintain application modified Settings in the settings files after a program update? i.e. I have 10 or so values in the settings file and the users can modify them... when I send a program update they revert back to what I initially programmed them to be.
View 3 Repliesi have created a user setting named 'setmeup' as string, scope = user, value = "magical meow meow!".in my code i access it and assign it a new value like this...my.settings.setmeup = "howdy cowboy!"my.settings.save()application.restart()when the application restarts, i expect the my.settings.setmeup = "howdy cowboy!" but when i check its contents its still "magical meow meow!".but when i use application.exit() instead of application.restart() and manually restart the program, my.settings.setmeup = "howdy cowboy!" which is correct.what must i do? i want to use application.restart() because i don't want the users to double-click the icon again to start the program. i want the program to restart automatically.
View 2 RepliesI have a class library (Named ADI), that needs some configuration settings from the project using it (like connectionstring, filesystem locations etc).
I want to define these settings in my Windows Forms/Web Projects App.Config or Web.Config, like other settings.
Here is part of my app.config for my windows forms application:
<applicationSettings>
<PhotoImportRobot.My.MySettings>
<setting name="ADIImageRoot" serializeAs="String">
[Code]....
Receive 'ConfigurationManager' is not a member of 'Configuration' in VS2008.I read all of the topics in the forum about this error Tried adding areference to System.Configuration.dll to the project and an "Imports System.Configuration" to the vb file.Still get an error
View 7 Replieshow to add and use configuration file in the vb.net application like web config file can i change the value in the configuration file
View 14 RepliesOn the compile tab of the project properties: If you look at the configuration dropdown it typically shows debug/release/active/all. I attempted to add another option at one point in the build->configuration manager window, but decided that I didn't want to keep it. I removed it there, but it keeps showing up in the dropdown on the properties, as well as generates a folder by that name.
Does anyone know how to remove this? I can't find any "delete" or otherwise options.
Does anyone have or has anyone come across an in depth guide to the .net app.config? I'm having significant issues trying to find a definitive guide to this area of .net.I can already handle custom configuration sections, from basic key/value pair settings right through to complete custom configuration handlers which I struggled to find information on, but I cannot find any documentation regarding basic native .NET functionality of the configuration file...for instance, with regards to BCL configuration. I've gone through the machine.config.comments and the config.xsd files and it has provided a little insight but not enough to fully grasp the full potential of the config file. I've also trawled through everything I can find on Safari and only managed to come up with a couple of useful tidbits that I wasn't previously aware of but it seems this area of .NET is extremely poorly documented and unless you have a very specific purpose in mind, it's useless trying to find information on it.
View 1 RepliesI have an ASP.NET application. It resides within another ASP.NET application. I put my DLL in the other apps bin folder and have a subdirectory with my aspx files. I can't edit the main app's Web.config.
So where can I store configuration settings? For example, this is an app that will get deployed to various clients. I want to store the client name used for display in the headers and such. And the location of a logo file.
FilePath for the Current Application's Default Configuration
View 3 RepliesFilePath for the Current Application's Default Configuration .I am writing several DLL's that each have their on configuration file. I am trying to set the Application Default Configuration to be the DLL's Default Configuration - not the EXE's Default Configuration. How can I determine the pathfile for the current Application Default Configuration??I have tried using FILEPATH of SYSTEM.CONFIGURATION.CONFIGURATION but can not get the syntax correct.
View 1 RepliesI have recently downloaded and installed VS2010 evaluation copy. I loaded a VS2002 programme I have been working on and until today it compiled and ran fine. Now I get this error. "Error while trying to run project: Unable to start programme "c:CreateF1ScreensinCreateF1Screens.exe.
This application has failed to start because the application configuration is incorrect. Review etc etc"
So i'm trying to create a save configuration file and I found the Application Configuration file which seems like it'll do what I want it to do what
View 3 Repliesi am using databse connection model but can't get actual result because of this error , i don't know why this occurring ,i have use the windows application with app.config file, i paste xml code.
<?
xmlversion="1.0"encoding="utf-8"?>
<
configuration>
[code]....
where I can get access to information relating to 'Application Configuration' for the .Net Framework?
View 4 Replies